Question about 2004 Toyota Camry
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 Toyota Camry Brakes
Raise the vehicle up and remove the rims & tires
Remove the brake pads, and then remove the calipers from the caliper retention brackets, do NOT remove the brake hoses from the calipers.
Remove the caliper retaining brackets from the hub assemblies (2 large bolts on backside of the bracket)
Tap the brake rotors off of the hubs, hit them from the back side of the rotor.
No big mysteries here, this is a very easy job.
Posted on Oct 21, 2008
SOURCE: Stalling Toyota Camry 2004
P-0102 and P-0113 are mass air flow and intake air temp codes, the P-0136 is an Oxygen sensor code. Before you do anything, check for debris in the Mass Air Flow Sensor, it's small black box with electrical wiring connector that is screwed into the intake air tube, between the air box and the intake manifold. Undo the screws, remove the sensor, and, with a flashlight, and look down inside it for debeis, or broken wires inside it. If it's dirty, it could throw a P-0136...Comment back on what you find; hope this helps, and thanks for choosing FixYa!
Posted on Oct 24, 2008
Spray Rataway Fragrance from Rataway.com . Rataway stops rats, mice, squirrels, rabbits,etc from nesting & chewing
Posted on Sep 06, 2009
If the smoke is black that your car is burning oil when it starts up. When your engine is hot, metal expands, sealing everything perfectly. When you engine is cold, not everything is sealed 100%. Your issue is probably the piston rings not seating right until the engine warms up. This will get worse over the years as continuous daily wear and tear will continue to wear the rings. Have your piston rings replaced. But don't just take my word for it, go to a dealer and have them diagnose it, if they say the same thing, than that's your issue, right on the money. Dealerships are they way to go, because they may give you a list of things that need to be, but they don't make things up.
Posted on Sep 27, 2009
Tips for a great answer:
Oct 28, 2017 | Cars & Trucks
Nov 05, 2015 | Toyota Cars & Trucks
Mar 03, 2015 | 2004 Toyota Camry
Dec 03, 2012 | 2004 Toyota Camry
Apr 17, 2012 | 2004 Toyota Camry
Feb 09, 2012 | 2004 Toyota Camry
Sep 15, 2011 | 2004 Toyota Camry
Oct 01, 2010 | 2004 Toyota Camry Solara
Jan 02, 2010 | 2004 Toyota Camry
Dec 11, 2016 | 2004 Toyota Camry
41 people viewed this question
Usually answered in minutes!