Question about 2002 Mazda 626

Open Question

My 2006 mazda 3 glove box won't open

The key turns in the lock the latch just won't work I cannot open the glove box

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Clock loses time

www.finishlineperformance.com/pdf/mazda3/bulletin/09-012-06-1548.pdf

Posted on Feb 09, 2009

  • 4044 Answers

SOURCE: Car keys locked inside a 2006 mazda 3. How do i

You will need a locksmith or someone with a "slim Jim". I recommend you go with the locksmith. We have a company called pop a lock here that can open doors for about $30.

Posted on Oct 15, 2009

  • 495 Answers

SOURCE: 2002 Mazda Tribute rear liftgate lock replacement

I'm not sure where' the screws are but basically You need to remove the panel on the rear door, then once the panel (interior trim) has been removed you should see a lock mechanism which will be screwed/bolted in place. Easier and cheaper then buying a brand new lock mechanism (unless you want to buy brand new) is going to a wreckers and finding your car model and get it that way (yes it's used but it'll probably save you tons of money vs the dealership) Best Regards.

Posted on Nov 22, 2009

  • 1 Answer

SOURCE: glove box latch broke close. How to open?

Hi, how are you? From what you are describing the latch on the inside sounds like it has broken and is not releasing. You can try to lay on the floor and look up in the bottom of the back of the glove box there are two tabs one on each side. If you push these tabs inward the bottom of the box should come free and help the top to come free. If you cannot see the tabs or can’t get the tabs pushed in, you are going to have to force it open, you can do this with a flat pry bar, wrap the end with a cloth to protect the paint. The good news is that the glove box latch is pretty cheap to replace.

Posted on Feb 22, 2010

  • 202 Answers

SOURCE: Mazda 3 -2006 will not start. Put in a new

check -clutch switch - ignition switch -ignition lock -neutral safety switch -starter relay starter hope this can help

Posted on Apr 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The latch of the glove compartment broke. Can't open the compartment


If you look under glove box you will see two to four screws that hold the glove box on. Take out the screws and the glove box will drop down and you can get inside and release latch..then you can get a replacement latch and replace.

Sep 19, 2015 | 1995 Buick Regal

1 Answer

How can i remove my 2005 honda element glove box , it won't open at all


Remove side clips holding the glove compartment into the console and unhook the elastic string that guides the compartment. -------------------------------------------------------------------------------
Super VAG K+CAN V4.8

Apr 03, 2013 | 2005 Honda Element

2 Answers

How do you get a 2000 dodge neon trunk open when the key won't work? No button in glove box.


The only other way I can think of is to remove the back seat to gain access to the trunk latch.
Otherwise, a locksmith would be my next solution.

Aug 28, 2011 | 1995 Dodge Neon

2 Answers

2000 XK8 I locked the glovebox and now it won't open . any ideas


Welcome to Fixya

The car might be stucked in Valet mode. Use the black key that you have to open the trunk, it overrides the Valet Mode. The key goes in a hole that is between the X and the K on the emblem on the rear of the car.

Thank you for using Fixya!

Aug 08, 2011 | Jaguar XK8 Cars & Trucks

1 Answer

HOW TO TAKE LOCK OUT OF GLOVE BOX DOOR HANDLE?


Hello, to take lock out of the glove box door handle you have to follow these steps:
1. You have to open the box door.

2. Push latch to close position

3. Put in lock position and remove the key

4. Push in tab

5. Insert the key

6. Turn the key to unlatch the position and pull lock out.

7. If latch needs to be replace, UN-screw collar

8. Reverse to re-install .

Thanks

Jun 29, 2011 | 1993 Chevrolet Caprice

1 Answer

'91 LS400, trunk will not open. key will not turn, electric latch switch clicks but won't open. valet lock in open position. Tried 1) disconnect battery, reconnect battery, use switch, push down on...


If you hear the sound of the electric latch switch, then it's working but stuck somehow. Just put the key in the switch and turn it to the right and then pull up the trunk or ask someone to help you. it will open. I tried it today and it opened with me. It was stuck from inside by some kind of a broken plastic pieces. Just removed it and now it's working fine. good luck

May 26, 2011 | 1991 Lexus LS 400

2 Answers

Glove box will not open and I broke the lock and latch. How do I get into the glove box?


if the latch and lock are already broken, then use a pry bar or screw driver and break it open. that is the only way...

Jan 07, 2011 | 1997 Cadillac Catera

1 Answer

Glove box will not open. Any ideas?


does the latch have a keyhole? its probably locked, use you car key and put it in the keyhole turn the key it should unlock it and youll be able to open your glovebox

Dec 01, 2009 | Volvo V70 Cars & Trucks

2 Answers

Cant open the glove box


No trick, it is most likely locked, use a putty knife an pry it open carefully near the center where the latch is, it will pop open

Nov 14, 2008 | 1999 Volkswagen Passat

1 Answer

Mitsubishi Galant 2000 Glove Box Lock


First off you will need your key to the lock and a 1/8" flat blade screw driver.  Notice that your lock only turns 1/4 rotation, after doing this procedure you will be able to turn the lock an extra 1/4 turn counter clock-wise (when viewed from the front of the latch).

Turn the lock so it is vertical (perpendicular to the latch itself (counter clock-wise)).  Turn the latch around so you can view the back and the lock is to your left.  Above the lock there is a slot that you can put your screw driver into (not the indention in the metal).  You need to insert your screw driver and listen very closely, you should hear your screw driver hitting the metal latch.  Once you push the latch down with your screw driver, turn the lock another 1/4 turn with your key from the front (counter clock-wise looking from the front).

Once the lock has been turn a full 1/2 turn, you should be able to push the lock out from the back of the latch.

To put the lock in the new latch, you have to have your key in the lock.  Put the lock in the latch with the one pesky keep latch facing the handle used to open the glove compartment.  Once the lock is in the new latch, turn clock-wise until you can't anymore (1/2 turn).

You're done my friend!

Oct 11, 2008 | 2000 Mitsubishi Galant

Not finding what you are looking for?
2002 Mazda 626 Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...