Question about 1985 Chevrolet S-10

1 Answer

Remove a starter on a chevy s-10 pu

Do you have to take both sides of the exhust off

Posted by on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

No just the ones by the starter

Posted on Mar 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1995 Chevy Z71 PU


Probably the starter has failed.

Dec 31, 2013 | 1997 Chevrolet Cavalier

2 Answers

How do i find where an exhust leak is coming


check where the headers come off of the engine exhaust leaks are generally quite loud and you will either be at the headers/exhaust manifold or just as you come off that bend there will be a flange gasket inside the two pipes joining. from the bend to the straight pipe just as it passes the gearbox and starts to straighten out.

Jun 22, 2010 | 1996 Chevrolet S-10 Pickup

1 Answer

How do I take off a starter on a 2000 Chevy S-10?


Disconnect battery cable Ground side, Raise vehical and place jackstands to stabelise, Crawl under vehicals passenger side, remove the 2 bolts on the nose of the starter, and brace on the rear of case if equipped. Push back starter and lower nose first, remove wire retaing nuts, and reverse to reinstall

Jun 11, 2010 | 2000 Chevrolet S-10

1 Answer

How do i remove the heater core from my 1998 chevy 4x4 pu


start by removing glove box . then locate core and just start removing what you need to so you can get to it This is NOT a easy quick fix so take your time and remember how it came apart and where all the parts go

Dec 14, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Removing the door panel from a 97 Chevy S-10 pu truck


The center section does come out it has little tabs front and rear you have to bend it very carfully.GOOD LUCK

Sep 16, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

Exhust systen chevy s-10


There is one before each cat you have and one after each cat. check on top of the exhaust after the cat next to the frame.

Aug 31, 2009 | 2000 Chevrolet S-10

1 Answer

1999 Chevy 3500 PU 5.7l gas. No power to starter there is one fuse #8 called "crank" that does not have power to it fuse is good just no power to it fuses to the left and right are good. All other fuses...


If your starter relay clicks, check for power coming out of the relay. You most likely have a starter issue, or if you have an aftermarket alarm, remove that first.

Aug 14, 2009 | 1999 Chevrolet 3500

2 Answers

Chevy S10 Pickup Starter. Removed the two bolts


Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don

Mar 14, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

How to remove heater core in 2002 chevy s10 pu. got dash out and lines off are there hidden screws?


There is a black covering on passenger side that should have four screws in it. You should find the heater core hidden inside the casing.

Mar 03, 2009 | 2002 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...