Question about 2002 GMC Sierra 2500HD

Open Question

Need diagram of brake lines for 2002 gmc 2500hd

See how brake lines go

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

autodr
  • 260 Answers

SOURCE: 2002 gmc 2500hd 4wd abs problems

the problem is most likely a wheel speed sensor at one of the front wheels. retrieving a code in the abs system could pinpoint which wheel it is. i believe the wheel speed sensor is part of the bolt on front wheel bearing assy. if you plan on doing this yourself and are mechanically inclined. you will need an a/c volt meter to check sensors. let me know if i can assist further.

Posted on Dec 04, 2008

  • 104 Answers

SOURCE: Need firing order diagram for 2002 gmc envoy

one, five, three, six, two, four

The plastic intake should have this sequence molded into it somewhere, and even the corresponding cylinder numbers in front of their respective holes. Have fun, and thanks for posting on Fixya.com

Posted on Mar 20, 2009

ddegroote
  • 35 Answers

SOURCE: need fuse box diagram 2002 gmc envoy

If I remember correctly if you look at the back side of the fuse cover, it should tell you what the fuses are. Also in the owners manual in the index, under fuses, it should give you a diagram of the fuse location for the acc. outlets. Good luck. The fuse should be a 20 or 25A fuse.

Posted on May 26, 2009

  • 1118 Answers

SOURCE: need to replace brake line from rear axle forward

Chanses are it broke behind the gas tank wear it runs along the frame rail. You don't need a diagram to fix that, just unhook it at both ends and break it off or cut it off buy the tank and take the pieces with you to a auto parts store and they will match it up with new line, just take a tape measure and measure from the rear axel to the front block or perportioning valve, and don't worry about the piece behind the tank, just run the new line alongside the old one behind the tank unless you want to pull the tank out.

Posted on Sep 06, 2009

  • 548 Answers

SOURCE: 1999 gmc sierra brake line diagram

I would join autozone.com for free and they have most any diagram you will need for free for this vehicle

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pick up front right brake line schematics?


Buy a NEW line and put it back on from where you take the old one off from

Jul 27, 2014 | 2001 GMC Sierra 2500HD

1 Answer

Break line diagram 2002 gmc 2500hd duramax 6.6


you lost them????? LOL
ok , my guess is you want to study them,?
the FSM covers that totally, buy the book?
or if in USA< log in to alldata.com and read it there?
please give hint as to the why?

May 04, 2014 | 2005 GMC Sierra

1 Answer

How can I adjust the parking brake on my 2002 GMC Sierra HD


Umm... I could be wrong but... the 2002 GMC 2500 has rear *disc brakes with an interior set of *drum brakes for the E brakes. check with your dealer because there was a recall on the E brake for some early 2000 GMC trucks. also there is a manuel adjuster for the parking brakes.

Jan 26, 2013 | 2002 GMC Sierra 2500HD

1 Answer

Where and how do i bleed brakes on a 2002 gmc 2500 hd 4 wheel drive


Like any other a bleeder at each wheel start with the further one first Johnny

Mar 16, 2012 | 2002 GMC Sierra 2500HD

1 Answer

I have no power steering or power brakes on my 2002 gmc 2500hd 4x4 with a 6.0engine


check your belt.if ok,take belt off and check power steering pump shaft is broke

Feb 05, 2011 | 2002 GMC Sierra 2500HD

1 Answer

2002 GMC 2500HD Duramax No power brakes or power steering


TEST the vacuum pump. Both systems are run by it. Pressure should be at least 10psi right out of pump at 1000 rpm.
P.S. If pressure varies more than about 4 psi as the rpm vary the pump is failling.

Dec 20, 2008 | 2002 GMC Sierra 2500HD

2 Answers

Rear Brakes on a 2002 GMC 2500HD.


skip8303, it's not the same, you need 18mm socket, t55 torx and alot of grunt.

Dec 11, 2008 | 2002 GMC Sierra 2500HD

1 Answer

Rear Brakes on a 2002 GMC 2500HD.??


You will need a large allen socket or torqes (sp?) socket to loosen the caliper bolts; you can get at auto parts places. Other than that you will likely need a medium to large deep throat C clamp to force the fluid back to the resevoir by squeezing the calipers back in the body. Do this slowly as there may be check valves to over come with the fluid return. I am not aware of other special stuff.

Dec 11, 2008 | 2002 GMC Sierra 2500HD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...