Question about 1996 Geo Tracker 2 Door

Open Question

How to adjust clutch on 1996 geo tracker

Clutch pedal has lots of play and hard to shift at standstill.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: transmission won't shift from low gear .

Check you transmission fluid if its thin theres your issue if not it could be your bands or your torque converter.

Posted on Mar 19, 2009

Ad
  • 1 Answer

SOURCE: White smoke coming from my 95 Geo tracker,

most deffinately an internal issue. 2 possible problems oil seeping through valves when engine not running. sitting in combustion chamber and burns off during start up. 2 piston rings in one or more cylinders bad and letting oil blow by and start up is only time it is really noticeable.

Posted on Oct 09, 2009

Testimonial: "THANK YOU SO MUCH FOR YOUR HELP! I am a widow with a teenage GD, who aced high school at 15& attends college on scholarships 47m.away.I have to drive."

  • 137 Answers

SOURCE: Geo tracker wont shift after clutch and clutch cable replaced

this is common.
it is caused because NO ON ever changes the cable at 100k miles.
it then wears a groove inside the cable and jams where you cant see.
(got my car dirt cheap cuz no one could figure this out)

the next thing to happen (toss coin) is the fire wall cracks or the clutch pedal spline strips.
full story here,
http://www.kick-fix.com/tranny/clutch/clutch-on-kick.html

now you know the why , so now correct all the damaged caused by a $45 cable.

all parts are at suzuki , every single one.

Posted on Oct 22, 2009

  • 137 Answers

SOURCE: took over a 95 geo tracker project car. alot of

http://www.kick-fix.com/tranny/clutch/clutch-on-kick.html

all parts sold at , good old suzuki.

Posted on Oct 22, 2009

roniecon
  • 6826 Answers

SOURCE: 95 Geo Tracker - Automatic. Starts ok, but when

It needs a fluid change,and filter,in the transmission,also,add a additive called LUBEGUARD from napa auto parts,when you ask for the additive,be sure to get the one for gm,this additive keeps the valve body slick,and moving,this is the problem,your filter,and ,or,the fluid is dirty,and causing hydraulic problems,and valves to stick in the valve body in the transmission.

Posted on Mar 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Haw do i adjust clutch cable on 1997 geo tracker


the book shows 2 ways
the FSM
1/2in play at pedal or 1/8 " inch at bell lever.
most of these cars the cable is long gone bad inside.
and jams, and in the end, you brake the pedal, arm, or spine or worse.
its all there, play, pedal height,
and links to real FSM pages.

http://www.fixkick.com/tranny/clutch/clutch-on-kick.html

Oct 15, 2014 | Geo Tracker Cars & Trucks

1 Answer

Why wont my 1990 geo tracker will not go into gear


Has to be a clutch problem,either a sticky clutch plate out of adjustment,if it is a hydralic clutch it could be low on fluid or have air in line. If it has a clutch cable reduce the free travel at the clutch fork to 1/4 in. Travel.

Jul 21, 2014 | 1990 Geo Tracker

1 Answer

How to adjust 95 geo tracker clutch


engaging?
you meant dis-engage im sure.
pedal up is engaged,
pedal at floor dis-engages it.
my guess, is the clutch drags unless i push the clutch pedal 100%
to the floor.
1: bad cable is 90% cause. non last this long.
2: no free play is way too loose.
3: broken lever on the pedal top. caused by #1

all fail modes covered here.
http://www.fixkick.com/tranny/clutch/clutch-on-kick.html

Apr 23, 2014 | Geo Tracker Cars & Trucks

1 Answer

Adjusting clutch cable 1996 goe tracker


old post
the fsm is free, ask.
adjust the bottom cable end nut #19. such that
pedal as 1/2" play (12mm) at pedal. not below.
the below play is covered in FSM.
http://www.fixkick.com/tranny/clutch/clutch-on-kick.html

Apr 04, 2014 | 1996 Geo Tracker 2 Door

1 Answer

1996 geo tracker won't shift into gear


the lever dont move, (called park lock out)
or the lever moves to Drive. but car will not move
and engine races fast , when you press throttle pedal.
old post.,

Jan 08, 2014 | 1996 Geo Tracker 2 Door

1 Answer

Clutch cable geo tracker


don't want to shift? fills a huge basket ,
1: grinds?
2: can't get in to some gears.? or all gears.? (engine running and not)?
3: clutch drags, clutch slips kills all gears, or just 5th.
drag kills them all and reverse 1st , its the canary gear. !! non synchro
4: noise.? or chatter, ****,larchig, or throwout hash ,?

here is the clutch page, link below.

the #1 failure for a gear not Selecting is a $5 fix.
the tip of the shifter shaft, plastic POS is broken, bar none this failure,#1 and sold only at SUZ, get em' while you can they are chapter 11 ANDGM/GEO is brain dead , ask them , and you get blank stares.

this can be proven, by selecting the gears by hand. running.
if failure, cant move those fork rods?
running? only
if you cant, the clutch is dragging. see why?
works stalled means the clutch drags.
can you shift to 1st stalled, start engine drive off can you get any gear? yes,if yes , constantly? with no grinding, the clutch is ok.

to do that manual shifter off test test the shifter must be removed.



the we get to the cable.
see the 1inch rule here, no guessing.
play set to spec, and you floor the pedal , person 2 sees 1 inch travel, (END new cable worry)
if it moves 1inch and the tranny can not be SELECTED.
the clutch is bad, if you can select only stalled motor.
if selection fails all time, stalled and running, the tranny is siezed.
covers every fail logged by 1000s of users

http://www.fixkick.com/tranny/clutch/clutch-on-kick.html

Dec 12, 2012 | 1994 Geo Tracker

1 Answer

Throwout bearing sticks on my 90 tracker


very old post , the cables all do that, at 200k, miles.

old post.
they have all fixes for that here,
http://www.fixkick.com/tranny/clutch/clutch-on-kick.html

Nov 10, 2012 | 1993 Geo Tracker

2 Answers

Geo tracker wont shift after clutch and clutch cable replaced


this is common.
it is caused because NO ON ever changes the cable at 100k miles.
it then wears a groove inside the cable and jams where you cant see.
(got my car dirt cheap cuz no one could figure this out)

the next thing to happen (toss coin) is the fire wall cracks or the clutch pedal spline strips.
full story here,
http://www.kick-fix.com/tranny/clutch/clutch-on-kick.html

now you know the why , so now correct all the damaged caused by a $45 cable.

all parts are at suzuki , every single one.

Jul 22, 2009 | 1991 Geo Tracker

1 Answer

Tranny clutch problems in Geo Tracker


well i have test.

if you have 1inch free play in pedal it clutch slips ,
clutch is bad , or the 89 93 bell housings are diffr.

was disk put in not backwards?
is it a new clutch.




Nov 19, 2008 | 1992 Geo Tracker

Not finding what you are looking for?
1996 Geo Tracker 2 Door Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8501 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...