Question about 2004 GMC Sierra 1500 Crew Cab

2 Answers

How to replace the front diferential seal where the drivers side drive axle go in on a 2000 sierra 1500 Z71 4WD?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Dont know how bad the leak is but be sure wobbler on the front diff. isnt full of dirt.If it is plugged it wont let the pressure build up out and push oil through the seal.

Posted on Feb 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 80 Answers

THis would be way too much to walk you thru. If you like to do your own maintenance-buy a chilton manual online or at your local auto parts. It will save you time and $

Posted on Jan 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is passenger side front axle nut torque?


This question was answered 7 years ago on the following link:
http://www.justanswer.com/car/1cox3-gmc-sierra-1500-need-torque-specs-front-axle-nut.html
It contains the info that you need (177 ft lbs)

Mar 27, 2016 | 2004 GMC Sierra 1500 Crew Cab

1 Answer

I need a diagram of a 2001 dodge ram 1500 four wheel drive front axle


Search Results
    images for I need a diagram of a 2001 dodge 1500

    Replace front axle seals 1998 Dodge Ram 4X4, part 1 ...

    ? 14:28
    https://www.youtube.com/watch?v=WvRyg95cUIQ
    Nov 1, 2010 - Uploaded by spelunkerd
    If you have gear oil leaking from a front axle tube then this is a ...a circular hole saw (he says about 2-2 1/4"), grinding the teeth down, ... Hey my 2001 ram has a big puddle coming from it'sdriver side wheel could this be it?.

Feb 08, 2016 | Dodge Cars & Trucks

1 Answer

Front axle differential on my 2000 sierra 1500 4 wheel drive isleaking-should I replace the whole unit?


I would just replace the gasket and put new gear grease in it . If trouble shifting it could be transfer case. check fluid in it too.

Mar 12, 2014 | 2000 GMC New Sierra 1500

1 Answer

How do i replace the front axle seal drivers side n a 2004 escalade


remove axle nut, remove lower ball joint nut, pop drive shaft loose with punch or wood dowel , pop lower ball join from knuckle pull up push axle out of knuckle , pull back knuckle and tie in place pop out axle with big screwdriver or pry bar ,remove seal replace.

Aug 01, 2012 | 2004 Cadillac Escalade

1 Answer

2000 Gmc sierra sle 1500 on the floor 4x4, 4x4 engages but nothing to the front wheels, the drive shaft spins, but still nothing, any suggestions?


Sounds like you need a front axle actuator. This actuator bolts to the side of the front differential housing. It is electrically engaged. You can purchase them online starting at about $40

Jun 03, 2012 | 2000 GMC Sierra

1 Answer

Do you have to take the rear axle out to change th rear wheel seal on a 2000 two wheel drive GMC pickup?


Yes,the axle has to come out.Which means the rear end cover has to be removed.If your not familiar with this process you should not attempt it on your own or you could end up with bigger head aches.Hope this heaps.Good luck.

Feb 16, 2012 | 2000 GMC New Sierra 1500

1 Answer

2005 GMC 4x4 HD 2500 6.0 eng. rear axel seal


SEAL COULD BE LEAKING CAUSE YOU DIDNT LUBRICATE THE SEAL LIPS WITH PETROLEUM JELLY TO HELP THE THE SEAL LIP SEAL OR YOU DAMAGE THE SEAL WHILE DRIVING IT IN.AXLE FLANGE NUTS TORQUE IS 58 FT LBS THE AXLE HUB NUT TORQUE IS 177 FT LBS.

Jul 14, 2010 | 2005 GMC Sierra 2500HD 4WD

1 Answer

Change front differential seals in 1996 gm sierra


In order to replace the seals, remove the front diff assembly. To remove the passenger side seal, I would suggest removing the tube assembly (5 bolts). This is due to a steel washer that goes on the end of the axle. If you just pop the axle out, it is tough to get the washer aligned and back on the shaft. Use anerobic sealer to seal the housing to the diff case. The drivers side you can pop out with a hammer.

Jul 02, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Gear oil on left front knuckle 2000 sierra 4x4


IF this is the driverside. The vent tube for the fourwheel drive is on that side it might be plugged that is where i would start look to see if the axle is full of oil if not i bet that is the problem. Find the vent hose and blow out with air

Jan 14, 2009 | 1999 GMC Sierra

1 Answer

2005 Yukon Front Diff Axle seals


You don't have to remove the whole diff to change the seals, but you will have to seperate it where the shaft meets the carrier housing. There is a clip holding the passenger axle shaft in place that you have to remove to change the seal. The drivers side axle stub can be removed with a little force as there is a spring clip holding that side in.

Sep 01, 2008 | 2003 GMC Yukon

Not finding what you are looking for?
Cars & Trucks Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...