Question about Cars & Trucks

Open Question

How do I bypass immobiliser on a 02 model Ducati monster 659? Do I need to replace the entire ignition system including the c.d.i , key, barrel, immobiliser etc.?

It's an uninsured stolen recovery and although I have the code I don't have the keys and although the keys were stolen along with the bike,the assholes still busted off the ignition barrel and now it won't fire. I can get it to turn over but when I checked for spark by removing the spark plug lead and every time it kicks over I manage to get only one spark every time and then nothing. I know I can go to the dealership but its going to cost me a fortune and I'm happy to just bypass the entire system for now and I also know that people say its impossible but obviously it can be done somehow . After all its just a machine and a computer and we're humans!

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2001 chevy cavalier lost key can I replace the ignition switch without a key?


the original key is coded to your car.
So changing the barrel to have a new key wont help and ill tell you why.
Inside the original key is a transponder chip that is programmed to the cars immobiliser unit.
Attached to the ignition barrel is whats called a reader coil and its job is to read the keys chip when inserted in the barrel to deactivate the immobiliser so that the car will start.
What you need to do is contact a good knowlegable locksmith to provide a new key and code it to your car

Nov 03, 2016 | Cars & Trucks

2 Answers

How to make a shaved key for 1991 Buick century?


replace the barrel in the ignition lock and you will get 2 keys already cut to the new barrel. If there is an immobiliser included in the system you will have to get the new keys programmed to the CPU in the ECM of the car

Sep 03, 2014 | 1991 Buick Century

1 Answer

Immobiliser faults


HI
I hope that you still have the old key.
all you have to do is that: open up the old key/remote and look inside it for a small black rectangle piece, this is the immobilizer chip.
remove it carefully don't brake it, and place it inside the new key/remote, put a little glue on it

good luck

Feb 24, 2014 | Cars & Trucks

1 Answer

How to remove ignition barrel from Holden Astra Sedan


Just replace the key faub. or try disconnecting the neg battery cable for about 5 min and then re connect it and it may reboot the system

Jan 01, 2014 | Cars & Trucks

1 Answer

Computer shut down fuel system reset


Hi, Sounds like the immobiliser isn't de-activating. The system will prime when the ignition is turned on and the car will start but then the immobiliser will cut the fuel after 2-3 seconds. Are there any warning lights or led lights staying on. If you have a spare key and haven't tried it then start there first. If you do and neither key works then it could be a number of things including the pick up ring around the ignition barrel but you would need to get the car checked out proffesionally before you start replacing parts. Good luck, Jon.

Dec 15, 2013 | Subaru Justy Cars & Trucks

1 Answer

Hi, I have a suzuki swift 2000 model, the key has snapped in the ignition, i have a used replacement ignition barrel and key. When fitted the engine turns over but won't start. I'm guessing th


This car has a chip key, you can't just put any old key in it it must be programmed to not turn on the security system and disable starting, which is what you have now, the system has locked you out.

Feb 10, 2012 | Suzuki Swift Cars & Trucks

1 Answer

How to bypass immobiliser in 94 ford falcon after ignition barrel has been replaced ??


Your ford dealer visit may not be as expensive as you think, you need 2 pats keys and have them perform an ignition key code erase then they should be able to program your 2 new keys, The Ford Dealer I work at only charges 0.5hrs or approx $50.00 dollars Canadian.

Jan 12, 2012 | Cars & Trucks

1 Answer

My key wont turn in the ignition


Either the key is worn, the lock barrel is worn or the steering lock is engaged.

The last one can be solved by pulling down or pushing up one side of the steering wheel as you try to turn the key; this tales the load off the steering lock allowing it to disengage.

The only other fix is to try any spare keys which you have for the car. If they work then your main key needs to be replaced. If not then you need to have the ignition key barrel and possibly the entire steering lock assembly professionally replaced. As your car is an older model a garage may be able to permanently disable your steering lock as a cheaper fix if that's where the issue lies, but you'll then find that your insurance company will want to increase your premiums or even refuse cover. If your keys are chipped immobiliser keys then they may all need to be reprogrammed to the car as part of the repair job.

Mar 05, 2010 | 1994 Mazda 626

3 Answers

How to bypass the chip in the key 1995 chevy camaro


cant bypass if u want to get rid of it need to replace ignition system with a non security chip system--including computer reprogram

Oct 29, 2009 | 1995 Chevrolet Camaro

2 Answers

Does not start.on ignition the immobiliser light on panel flashes


most common cause is your key fob is broken.

check this by 1st gettin a camra phone goin onto the camra point key at camra and press button if you see a red light flash it is workin if not it is faulty which means a replacment key hope this helps

Sep 26, 2009 | Renault R5 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...