Question about Cars & Trucks

Open Question

How do you change fog light bulb on lexus 400h

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

j_del
  • 1586 Answers

SOURCE: How do you change the fog light bulb on 1993 zx?

Take out the small screws that hold your turn signal/marker lights on. This will allow you to reach in and undo the three (if I remember right) 10mm nuts on the back of the fog housings that hold them in the bumper. Once they're removed, press on the back of the fog housing and the foglight assembly will pop out of the bumper. Then you can replace the bulbs.

What I did on my Z is something you might consider - while I had them out, I took them apart (just a couple screws and bolts, very easy). Open it up so that you have access to the glare guard - the cup that sits in front of the bulb. This blocks forward projection of the light, and instead bounces it onto the reflector to be spread very wide (but not far forward) in a fog beam pattern. I used pliers to physically break the guard off the housing, so that instead of a wide, shallow fog pattern, I had a forward-projecting driving beam. I also swapped the 35w OEM bulbs for 55w higher-output superwhite bulbs (this increase in power consumption is not enough to cause any risk to the wiring or fusing, by the way - it worked for years for me). Then put them back together and reinstall them - you'll find a drastically improved light pattern for night driving, and they're still low enough to the road to cut under most fog. Especially since I always felt that the Z headlights were pretty pathetic for output (at least until I installed HID lighting), this was a great mod to make to the car.

Posted on Sep 04, 2008

bunnydawg
  • 5158 Answers

SOURCE: 2001 LEXUS IS 300 FOG Lights

as you have a multimeter .... check that there is voltage going to the lamps when power is on for them. as well locate the relay for them...

Robert

Posted on Sep 11, 2008

  • 1 Answer

SOURCE: Changing bulbs in fog lights

Hi this is a bit of a hair raiser, first of all you need to turn the wheel all the way into the motor, left or right depending .
The plastic cover underneath is only held on by some screws and retainers take these out, the cover will be loose but won't come out, gently pry it away from the fender, reach behind and unscrew the bulb housing. Be warned there are two or three different bulbs on the market take yours out before heading off to your local spare parts dealer, it might save you the time of having to go again.
hope this helped
regards Warren

Posted on May 30, 2009

c17hydro
  • 2984 Answers

SOURCE: how to change fog lights bulbs on my 2005 honda

548ae69.gif

  1. Remove the fog light mounting screw.
  2. Disconnect the connector from the fog light.
  3. Turn the socket about 45° counterclockwise and remove it from the housing.
  4. Remove the bulb from the socket.
To Install:
  1. Install the bulb in the socket without touching the glass with bare hands.
  2. Turn the socket about 45° clockwise to install it.
  3. Connect the connector to the fog light.
  4. Install the fog light mounting screw.

Posted on Jul 15, 2009

emissionwiz
  • 75797 Answers

SOURCE: how do i change the fornt fog lights of a lexus

from under and behind the front bumper

Posted on Sep 11, 2009

Testimonial: "thank you but do i need to take anything off?"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 Lexus GS300 fog lights will not turn on. Where is the fuse for the fog lights? Here-to-for, I've changed individual fog lights but neither operate now. Please help. Mike


The fuse for the fog lights could be in the Fuse Convenience Center under the dash or in the Engine Compartment. It is most likely a fuse, relay, or could be the Fog Light Switch. You need to test each one starting with the Fog Light Switch first,

Aug 10, 2010 | 2002 Lexus Gs 300

1 Answer

How do I reset the maintenance msg on a 2007 Lexus RX 400H?


push odo buttom and keep pressing ,turn ing key on w/o start engine few seconds

Aug 10, 2010 | 2007 Lexus RX 400h Hybrid

1 Answer

What size fog light bulbs i need? They blew out and i cant find fog light bulbs anywhere!


the wattage will be on the lamp somewhere normally stamped on the ring under the glass - the voltage will be 12v - I like to use 120 watt driving lights - but fog tend to be lower and depending on the lamp - either the lens or the bulb is yellow - if they are cibe lamps or similar they shouldn't be to hard to find -

Apr 03, 2010 | 1995 Lexus GS 300

1 Answer

How to replace fog ligth bulbs on lexus sc400 1993


Hi

Such and early model, the lenses should unscrew from the outside and take them off and replace the bulb. If not there will be reataining screws behind the lights which will relaese the light unit and hey presto.

Mar 05, 2010 | 1992 Lexus Sc 400

1 Answer

Fog light keeps going out, replaced bulb, it worked for a few da


Make sure, there is no water intrusion. The fog light lens may have a pin hole or crack in it causing water intrusion.

Jul 26, 2009 | Lexus ES 300 Cars & Trucks

1 Answer

Replacement of fog lights


drive your lexus to an autozone store and they will take a look at it, sell you the correct bulbs and assist you in replacing them...pretty good service huh!

Mar 14, 2009 | 2001 Lexus IS 300

1 Answer

How to replace bulb for fog on the front .


You can access it from behind.You have to remove splash shield and go from the underside.

Nov 12, 2008 | 1999 Lexus RX 300

1 Answer

Fog light bulbs


You need to remove the plastic under the car, it should either be bolted or screwed in. Pull this down and you should have access to the bulb, a rubber cover and a clip holds the bulb in. No need to remove the entire housing.

Oct 09, 2008 | 1998 Lexus Sc 300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...