Question about 2007 Volkswagen Jetta 2.5 Sedan
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
they are sealed trani and yes if your trani slip you need to add trani oil that u get from the dealer only and ask for breakable seal with oil
Posted on Jan 28, 2010
SOURCE: a picture of the location
i hate to be the one to inform you but Volkswagen are sealed units. Sorry.. Here is some info on a discussion board :
Posted on Oct 15, 2010
There is no dip stick on this car, most of the newer Volkswagen did not come with one, the way to check the level is car will need to be on a car lift and level, engine at operating temp. then run through the gears and back to park, apply parking brake and raise car, on the transmission pan there will be a plug, remove the plug and if fluid drips out it is full if not then you must add, note ; make sure to use correct fluid.i would get fluid from dealer!.
I will enclose a picture of the transmission pan to show you how it works, there is a tube in the pan, when you remove the plug on the bottom of the pan it has a tube that sticks up and fluid flows all around it , the top of the tube is the correct level, so any fluid higher than tube will flow out. you want a small slow stream or dribble to come out. if no fluid flows out then you will add, to add i have enclosed a picture of the fill location, remove the cap and add slowly until it starts to flow out the bottom, do not put plug in until flow is slow or dripping, if you add a quart then run through gears again, and add more if needed,
You can try to do this on the ground, just make sure car is level and warmed up and you run through all gears, so to recap, warm engine and then go from park and go through all gears with shifter then back to park and leave engine running with e brake on and remove plug and add as needed until slow stream then install plug on pan and cap on the filler. hope this is helpful good day.
Posted on May 18, 2012
Tips for a great answer:
Jun 05, 2013 | Cars & Trucks
Nov 13, 2012 | 2007 Volkswagen Jetta 2.5 Sedan
Sep 05, 2011 | 1997 Volkswagen Jetta
Mar 02, 2011 | 2002 Volkswagen Jetta TDI
Feb 26, 2011 | 2007 Suzuki Forenza Sedan
Jun 02, 2010 | 1996 Volkswagen Jetta
Feb 04, 2010 | 2006 Volkswagen Jetta
Dec 17, 2008 | 1996 Volkswagen Jetta
Dec 02, 2008 | 1997 Volkswagen Jetta
107 people viewed this question
Usually answered in minutes!