Question about Daihatsu Charade

Open Question

Need a wiring diagram for coil on daihatsu charade 1000 cc, 5 door, pls

I need to know about the wiring from my coil to distrubetor of the charade 1000 cc, 5 door (diahatsu)

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 98 Answers

SOURCE: 88 daihatsu charade idling problems

You need to check the throttle stop cushion is making contact. The engine will hunt if you have air in the throttlebody coolant pipes, if the coolant sensor is faulty or if the TPS isn't calibrated.

Posted on Sep 04, 2008

Ad
johnny5846
  • 379 Answers

SOURCE: firing order of a daihatsu charade 3cyl 1995 model

here is the firing order in picture form .
e2ff599.jpg
J5

Posted on Jan 21, 2009

  • 98 Answers

SOURCE: Size of Jets for 1984 Daihatsu Charade G11 Turbo Carburettor

You won't need to change the jets. We have had the Cb60 pumping 75- 90kW on the stock carby. Are you trying to increase performance there are better ways: e.g. RHF5 series turbo, lightened flywheel (4.5kg) with Mazda 121 clutch plate and 1600lb pressure plate. Swap in a G202 electronic dizzy& coil, and replace vacuum advance diaphragm.

Carby hat looks like this:





Posted on Feb 18, 2009

  • 98 Answers

SOURCE: specs for 1992 3cyl diahatsu charade ignition timing

Timing set with vacuum hoses disconnected and blocked is 5° advanced when flywheel dimple lines up with notch plate.

centrif wieghts 10.5° @ 2800
vacuum two stage 11° @ -320mmHg.

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I've got a daihatsu charade 1997 model 1.5 litre .engine light comes on at high revs once foot is off accelerater goes back to normal .. Also feels like it's starving for fuel sometimes too


Daihatsu Charade CS Car Reviews - The NRMA

www.mynrma.com.au > ... > Car Reviews > Daihatsu Car Reviews

NRMAApr 1, 1996 - NRMA's Car Review of the 1996 Daihatsu Charade CS reveals a long ...The TS, CS and Di models are available in automatic or manual transmission. ... A 1.5 litre engine has been added to the model line-up and fitted to the CS hatch ... Good fuel economy is a high expectation of cars in this class and the ...

[PDF]Daihatsu Charade - AA

https://www.theaa.com/.../DAIHATSU_CHA...

The Automobile AssociationJanuary 1997. Daihatsu Charade ... There are four models in the range, with a choice of. 1.3- or l.5-litre engines and three body styles. We ... between the two engines, but the 1.5 is the more torquey and pulls with a will from lower revs. The 1.3 ... Relativelyhigh gearing means that the 1.3 is a .... Type ?ve-speed manual,.

New & Used Daihatsu Charade cars for sale in A



Daihatsu Charade - Wikipedia, the free encyclopedia

https://en.wikipedia.org/wiki/Daihatsu_Charade

WikipediaThe Daihatsu Charade is a supermini car produced by the Japanese ... 5-speedmanual ... Japanese market cars claimed 55 PS (40 kW) JIS at 5,500 rpm. .... thehigh roofed two-seater, three-door CC model, while the rest of the range (CS, CX, ....The sedan, introduced in 1994, featured a 1.5-litre engine with optional 4WD.

Jan 13, 2016 | Daihatsu Cars & Trucks

2 Answers

My daihatsu charade 1989 manual is nto staring everyone says it is a problem with the iginition spark but i ahve tried two different starter coils and the roadside mechanic couldnt work it out what shoudl...


Check for ignition voltage at the coil. You will need a test light.

Please see my tip at http://www.fixya.com/cars/r5821173-doesnt_car_start_gasoline_engines . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Oct 07, 2010 | 1989 Daihatsu Charade

2 Answers

1992 Daihatsu Charade water pump?


Good luck with trying to replace this pump man, I just replaced mine put everything back together and four days of work later the dang thing wont turn over now. lol. as far as the diagram you can find on in google images or at daiclub.com that is where I found mine, and it was free both ways!! Good luck Merry Christmas

Oct 16, 2009 | 1992 Daihatsu Charade

1 Answer

What should the valve timing be on a 1990 daihatsu charade 1990 3 cylinder


Ignition timing should be checked and adjusted whenever spark plugs are replaced or any distributor maintenance is performed. Ignition timing at 1000 RPM or less should be as follows: on 1989 1.3L/4-79 engines, 3-7°BTDC; on 1990-92 1.3L/4-79 engines, 0-2°; on 1.6L/4-97 engines, 1-5°.

Jun 03, 2009 | 1990 Daihatsu Charade

2 Answers

Size of Jets for 1984 Daihatsu Charade G11 Turbo Carburettor


You won't need to change the jets. We have had the Cb60 pumping 75- 90kW on the stock carby. Are you trying to increase performance there are better ways: e.g. RHF5 series turbo, lightened flywheel (4.5kg) with Mazda 121 clutch plate and 1600lb pressure plate. Swap in a G202 electronic dizzy& coil, and replace vacuum advance diaphragm.

Carby hat looks like this:





Feb 18, 2009 | 1988 Daihatsu Charade

1 Answer

Point and condenser


You must put a smear of high temperature grease on the lobes where the rubbing block makes contact; otherwise the block will wear away rapidly causing the gap to close. Something like white molybedenum grease is the go.

I suggest you replace the screws that hold the points assembly with socket head (Allen) screws so that you can get some decent purchase without burring the screw head.

The best solution is to source a secondhand electronic dizzy and coil from a G200 series Charade. You will never have to worry about points ever again and the low end torque gain is quite noticeable. You will need to run an extra wire from the coil to the dizzy and tape off the wire from the starter motor, but that's about as hard as it gets.

Why would you want to replace the Aisan carby? It does the job pretty well, so long as the hoses are connected correctly and the various adjustment screws calibrated.

Oct 09, 2008 | 1990 Daihatsu Charade

2 Answers

Engine


If it's a daihatsu it will have "daihatsu" printed on the valve cover. The standard 4 pot sizes are HC-E = 1295cc, HE-E = 1499cc, HD-E = 1589cc

Aug 08, 2008 | 1991 Daihatsu Charade

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75842 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4517 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...