Question about 2003 Chevrolet Monte Carlo
Dirver's side seat is not heating although light switch works, wiring appears t be ok and fuse is good. Is it the elementwhere is it and how is it replaced?
The element is no good. You have to take off the seat cover and pull the element out.
Posted on Jan 05, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
more than likely it is the heating element in the seat that went bad. if there is a light on the switch it should be getting power and the heating elements under the seat coushin do go bad. it is not an uncommon thing.
Posted on Nov 30, 2009
It's very likely a broken wire to one of the serveral heating pads in the seat. The next possibility is the heater module which is located under the seat.
When I fixed the heated seat on my Pontiac Bonneville, I just pulled the seat out of the car. The heated seat wires are pretty obvious when you can see under the seat. I had an obvious broken wire that shorted against the seat spring. I repaired that had had resistance in the seat circuit. It turns out that my heater module was also bad. I switched it with the passenger seat and it works fine now. The module is about $80-100.
Posted on Jun 06, 2010
Tips for a great answer:
Dec 15, 2016 | 2006 Porsche Cayenne
Jan 21, 2016 | 2005 Chrysler Town & Country Limited
Apr 01, 2014 | 2000 GMC Jimmy
Mar 15, 2013 | Cars & Trucks
Nov 22, 2011 | 2002 Oldsmobile Bravada
Sep 03, 2011 | 2006 Chevrolet Trailblazer
Dec 26, 2009 | 2006 Buick Terraza
Dec 11, 2008 | 2001 Jeep Grand Cherokee
240 people viewed this question
Usually answered in minutes!