Question about 2001 Isuzu Trooper

2 Answers

Isuzu 2001 diesel engine won't start

Have an isuzu 2001 trooper with diesel engine that has a hard time starting especially in the morning or when the engine is cold. once it's warmed up, it starts okay. changed the glow plug, fuel pump and oil/filters but still has the same problem.

Posted by on

  • 1 more comment 
  • Anonymous Mar 14, 2014

    good morning can someone please help me i have a 1.8 diesel bantam bakkie and it struggel a lot to start in the morning but when the engin is warm it start fast

  • Anonymous Mar 14, 2014

    good morning can someone please help me i have a 1.8 diesel bantam bakkie and it struggel a lot to start in the morning but when the engin is warm it start fast

  • Anonymous Mar 31, 2014

    problem starting engine when cold, ok when warm

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Cant start deisel 3.0 lilter sounds like there is no fuel getting to the engine

Posted on Feb 15, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Are you keeping it plugged in so the heater on it keeps it warm? you might try adding a diesel additive to the diesel

Posted on Jan 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

DIESEL FUEL MIXING WITH WATER IN THE RADIATOR


Get some BLUE DEVIL and follow the Directions. You have a Blown head Gasket or a Cracked Intake or Head.

Feb 12, 2014 | 1998 Isuzu Trooper

Tip

3.0 diesel Isuzu wont start tip


Dip the oil and check its on the max , then put 2 litres more engine oil in the sump - this trick proves the oil pump pick up pipe welding or seal is ok or bad common fault on 3.0's

on Sep 03, 2009 | 2001 Isuzu Trooper

1 Answer

Where is the location of the egr valve on a 2001 isuzu trooper


on petrol V6 engine its right rear side of inlet manifold(left side when looking into engine bay) see pics. below
diesel its on inlet manifold left side middle section of manifold

eb59265.jpg
2736ba4.jpg

Nov 01, 2009 | 2001 Isuzu Trooper

2 Answers

My Isuzu Trooper 2004 4JX1 turbo just underwent a general engine overhaul. Its cranking but will not start. All electricals are ok. Does the PCM needed to be reset for it to start?


The ECU will be fine with a engine rebuild but the 4JX takes a bit longer to start if all the injector oil paths are empty - can be up to 5 or 6 mins of 20 second cranking bursts.
Also if you rebuilt due to diesel in the oil from bad injectors the control valve for the injector oil pressure may be faulty so it wont start.

Apr 08, 2009 | 2001 Isuzu Trooper

1 Answer

2001 Trooper turbodiesel oil pressure gauge


Drop the tin sump and check the pick up pipe as the pipe can crack and the seal goes hard so lets some air air in for a bit .

Mar 08, 2009 | 1999 Isuzu Trooper

2 Answers

Manual 1989 trooper 4 cilinder diesel engine


perhaps this is is a good start..will look around more for you also..good luck
http://www.car-stuff.com/mmparts/isuzu-trooper/repair_manual.html

Jan 08, 2009 | 1989 Isuzu Trooper

1 Answer

Cold starting problem


It may be a good idea to get the heater glow plugs checked out. They are usefull first thing in the morning especially with the cold spell we are having.

Dec 31, 2008 | 2001 Isuzu Trooper

1 Answer

MY 1999 ISUZU BIGHORN CANT START EVERY MORNING


If its the diesel engine the fuel is running out the head overnight try parking the car with the back up higher than the front to prove this , then get the valve from the Isuzu dealer that stops this .

Oct 27, 2008 | 1999 Isuzu Trooper

1 Answer

Isuzu trooper problem!with a 00 3 litre diesel engine not starting


Was it lined up right as the trigger point for the sensor is important.Is the fly wheel fitted one position only that the bolt holes line up or will it fit no matter which position it bolts up Line up the flywheel trigger with the sensor after you have put the engine to Top Dead Centre.Put at tdc and see if the trigger and sensor are together.

Oct 18, 2008 | 2000 Isuzu Trooper

Not finding what you are looking for?
2001 Isuzu Trooper Logo

1,941 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...