Question about 2003 Jeep Liberty

1 Answer

Head lights work brake lights don't, have changed brake switch and bulbs and checked fuses

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jeep Master
  • 21,873 Answers

When you say you checked the fuse, are you getting power in and out of it and the brake light switch ?

Posted on Jan 05, 2013

  • kimberly
    kimberly Apr 04, 2014

    yes switch is good

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2000 Jeep Wrangler, electrical issue

if the 3ed brake light works , rapidly move hazard switch back & forth & recheck, if they now work change turn signal switch , they are being canceled by switch

Posted on Sep 19, 2008

  • 178 Answers

SOURCE: 2000 jeep wrangler brake lights don't work

hello sounds like a bad or loose wire on your brake switch up under your dash follow your brake pedal upward push down on your pedal now watch as you let it go slowley where it touches the skinny flat area of your petal touches a switch about 10 inches up from the bottom you should see a button sticking thru a bracket were your pedal touches check and jiggle wire if no lights change switch goodluck

Posted on Sep 18, 2008

  • 69 Answers

SOURCE: Brake light problem

back feed causing the brake light to ground off of the head lights caused by bad ground or possible short

Posted on Oct 24, 2008

  • 249 Answers

SOURCE: 2005 jeep liberty brake lights will not work. I

brake pedal switch, get a wire, unplug plug, bridge circuit and check lights.
plug and switch is high up on the brake pedal not normally easy to get to.

Posted on Aug 15, 2009

  • 834 Answers

SOURCE: brake lights dont work

Check the brake light switch, it is down on the brake pedal lever, you can dis-connect the wire connector at the brake light switch and check for broken wires at the connector, and then jumper the connector with a paper clip, if the brake lights come on then replace your brake light switch.

There might be more than one switch attached to the brake light pedal lever, the brake light switch usually only has two wires going to it when there are two switches.

If there is no problem with the brake light switch then you can suspect the turn-signal switch to be at fault, as all of the running lights, turn-signals, brake lights, and hazard lights are all ran through the turn-signal switch. You can also try stepping on the brake pedal and wiggle around the turn-signal switch and see if the brake lights flicker or come on.

Posted on Apr 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Main brake lights don't work


check fuses first, then brake light switch, underdash, @ brake pedal. note : may need to replace switch, car is 23 years old, try this first.

Jan 30, 2013 | 1999 Chrysler Cirrus

1 Answer

My brake lights don't work on my 1999 Oldsmobile


IDK! Maybe the thid brake light bulb has a short in it.

Jan 24, 2013 | Cars & Trucks

1 Answer

How do i fix the brake lights on my mercury sable. all the other lights work fine


Does your car have the `lamp out'indicator system? It's more complicated.
My manual shows fuse #28 , a 15 amp fuse powers the brake bulbs.Is this the one you changed?
A bulb can be out for a long time and you don't notice it,then the other burns out and you think they both went out at the same time,but they might not have,see?
So check the bulbs and make sure you got that brake switch installed correctly. don-ohio (:^)

Jan 22, 2013 | 2000 Mercury Sable

2 Answers

2005 Ford Focus- Blinkers, Brake lights and hazards don't work -just change the bulbs and they still don't work. Help!


That should be on two different fuses, but everything goes thru the turn signal switch.
The switch might be faulty. A mechanic would check for voltage there.

Jul 11, 2012 | Ford Focus Cars & Trucks

2 Answers

1994 volvo 940 brake lights don't work


check the fuse .and all of the bulbs are working.if ok then change the brake switch.

Feb 01, 2012 | 1994 Volvo 940

2 Answers

Brake lights don't work , fuses are fine


assuming the bulbs are ok ,has to be the brake switch,on the pedal ,under the dash.

Sep 06, 2011 | 1996 Chevrolet C1500

1 Answer

Brake lights & Hazzard lights don't work; fuse ok... High mounted center brake light works... Turn signals work...suspect problem is multifunction lever Power drain to battery constant...2...


As for the brake lights push brake pedal down while pushing on and wiggling the hazard switch.If the brake lights come on then replace the multi-function switch.

Aug 10, 2011 | 1997 Oldsmobile Bravada

Not finding what you are looking for?
2003 Jeep Liberty Logo

514 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...