Question about Ford Cars & Trucks

2 Answers

Will a f350 with a 460 ci transmission fit in a 95 f150 with a 351ci

Have a 92 f350 with a new transmission... will it bolt up to a f150 with a 351 egine?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The 460 Trans mission will not bolt up to the 351 Windsor it will bolt to a 351 Cleveland block tho

Posted on Jan 21, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 21,873 Answers

I guess the short answer is I doubt it.
The 460 engine should be a big block and the 351 is probably a large 302. I would expect the bolt pattern for the bell housing to be different along with the mounting and the tail shaft.
The 460 should have a bigger drive shaft than the 351.
If you can get the model of the 460 trans a salvage yard should be able to tell you if they will interchange.

Posted on Jan 05, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 350 Answers

SOURCE: Transmission?

check the engine numbers if its the same engine then there is a good chance the box will fit but to be on the safe side check the gearbox number if that matchs then theres no problem yates210456

Posted on Oct 13, 2008

  • 33 Answers

SOURCE: trans

if they are same size engine, it should be fine

Posted on Feb 20, 2009

Molson02536
  • 3854 Answers

SOURCE: I have a 95 chery blazer transmission,came out of

It should work for you as long as there both 4L60E transmission, but take not there were a few changes to the transmission case and everything internal are the same. The key distinction of the Later 4L60-E (1997-2006) from the Early 4L60-E (1992-1997) or 4L60 (1990-1992) or 700R4 (1982-1989) is the six-bolt "hex" rear output or tailhousing / adapter pattern. The previous versions featured a four-bolt square bolt pattern at the adapter or tailhousing. Additionally, the removeable bellhousing is also another distinguishing feature. The Late 4L60-E transmission has a three piece case of cast aluminum alloy; bellhousing, main case, and tailhousing. GM shortened the package to 21.9" long - equivalent to a manual transmission of 15.4". Good luck and you should not have any problems swapping out the transmission.

Posted on Nov 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Turbo 93 eagle talon


i have fitted a new thermostat heat working fine. but temperature gauge not working

Dec 10, 2013 | Cars & Trucks

2 Answers

Will a 360 out of a 79 ford fit in a 86 f 150 ?


A salvage yard could probably tell you for sure.
The block may fit, but the manifolds and mounts may be different, as well as the transmission bolt pattern.

Jan 25, 2013 | Cars & Trucks

1 Answer

92 Ford f150 4x4 automatic trans mission changed fuel filter and changed transmission filter wont shift any more once u get pass 25 to 30 MPH it has the 351 Windsor motor and aod type transmission what...


You may have knocked a piece of dirt loose or the fluid level is to high or to low, add a can of LUCAS transmission conditioner and see if that clears up the problem.

Nov 09, 2012 | Cars & Trucks

1 Answer

I nee the head bolt torque specs for a 95 sable


    • Tighten retaining bolts in sequence to 80 Nm (59 ft. lbs.).
    • Then back off bolts 360°.
CAUTION: Always use new cylinder head bolts when installing cylinder head or damage to engine may occur.
  1. Tighten the cylinder head retaining bolts in two final tightening steps in sequence shown in the following illustration:
    • 50 Nm (37 ft. lbs.)
    • 92 Nm (68 ft. lbs.)

Nov 03, 2009 | 1998 Ford Taurus

1 Answer

I have a 95 chery blazer transmission,came out of a s10. Will it fit in my 1996 Blazer Lt (s-10 same thing). Ive replaced before with a 96 astro van tranning and worked fine. I noticed the 95 tranning has...


It should work for you as long as there both 4L60E transmission, but take not there were a few changes to the transmission case and everything internal are the same. The key distinction of the Later 4L60-E (1997-2006) from the Early 4L60-E (1992-1997) or 4L60 (1990-1992) or 700R4 (1982-1989) is the six-bolt "hex" rear output or tailhousing / adapter pattern. The previous versions featured a four-bolt square bolt pattern at the adapter or tailhousing. Additionally, the removeable bellhousing is also another distinguishing feature. The Late 4L60-E transmission has a three piece case of cast aluminum alloy; bellhousing, main case, and tailhousing. GM shortened the package to 21.9" long - equivalent to a manual transmission of 15.4". Good luck and you should not have any problems swapping out the transmission.

Nov 01, 2009 | 1996 Chevrolet Blazer

2 Answers

Will a 95 saturn 1.9 manual transmission bolt to a 98 saturn 1.9 automatic transmission?


This is the automotive equivalent of a ***-change operation. In short, dont do it...
The problem you have is not if the tranny will fit (which it won't as a direct bolt-in replacement), the problem is in everything else that needs to be moded. Your engines computer is not programed to recognize or work with a manual tranny. You would need to modify the console to accept a manual shifter, install a clutch and clutch pedal assembly, plumb the needed fluid systems, and replace the entire wiring harness in the engine bay. In short, if you are asking - this won't go well and even if it did work, the car would not be reliable. By the time you spend everything involved in this project, it would be much cheaper to buy a 95 or 98 Saturn with the transmission that you prefer.

Sep 23, 2009 | 1998 Saturn SL

3 Answers

97 Nissan Pickup transmission swap for 95 or 96 transmission?


yes this will fit, model years 88-97 will fit. I would recommend the newest model you can get, as they improved internal hardware after 93. hopefully this helps

Aug 15, 2009 | 1997 Nissan Pickup

3 Answers

Tyring to put '95 trans. on '95 accord


depends on the engines,call a scrap yard and ask what the interchanges are,or possibly an auto parts store

Apr 16, 2009 | 1992 Honda Accord

1 Answer

Trans


if they are same size engine, it should be fine

Feb 20, 2009 | 1989 Ford Bronco

1 Answer

Transmission?


check the engine numbers if its the same engine then there is a good chance the box will fit but to be on the safe side check the gearbox number if that matchs then theres no problem yates210456

Aug 17, 2008 | 1995 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...