Question about 1999 Nissan Terrano

1 Answer

Abs sensor on a nissan terrano do you know where it is

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 325 Answers

There is a sensor on each brake assembly simply follow the wires to each brake to disc/drum area at the end is the sensor...Good-luck..

Posted on Jan 04, 2013

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jdwills
  • 15 Answers

SOURCE: nissan terrano headlight

check out
http://www.sferamydlo.com.pl/Zbyszek/Nissan/R20/el.pdf


Bulb Replacement
The headlamp is a semi-sealed beam type which uses a replacable
halogen bulb. The bulb can be replaced from the engine compartment
side without removing the headlamp body.
I Grasp only the plastic base when handling the bulb. Never
touch the glass envelope.
1. Disconnect the battery cable.
2. Disconnect the harness connector from the back side of the
bulb.
3. Pull off the rubber cap.
4. Press end of the retaining pin together to release bulb.
5. Remove the headlamp bulb. Do not shake or rotate the bulb
when removing it.
6. Install the new bulb in reverse order of removal.

Posted on Nov 11, 2008

  • 1 Answer

SOURCE: heater plugs for nissan terrano 2

i have a nissan terrano 2.7 dti heater light not coming on some times dose and some times does'nt and it wont start

Posted on Mar 20, 2010

  • 1 Answer

SOURCE: ABS FAULT WITH NISSAN TERRANO YREG

Had same fault - was damaged wiring in loom at back of engine where main engine harness meets the bulkhead.

There is a screened cable grey/pink that houses the two O/S/F ABS wires blue and pink. The loom copex cuts through the ABS cable causing this fault. Take a look at link below:

http://www.bba-reman.com/forums/Topic79424-1-1.aspx

Posted on Nov 20, 2010

  • 1 Answer

SOURCE: 1988 Nissan Terrano/Pathfinder big problem!!!!

You should check the catterlac convetor on the exhaust if it's blocked it can stop the vehicle from reving

Posted on Nov 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Nissan terrano 3.0td 2006 stalls when hot and slow on acceleration


Check for bad coolant temp sensor=runs as if choke is on. Very common.

Mar 14, 2016 | 2005 Nissan Terrano 3.0

1 Answer

2003 Nissan Terrain 2.7 isn't revving up after starting it, cuts out when left running. Was put on a computer code PO235 showed up what is it? Please advise?


Looks like a boost sensor or part of the circuit is malfunctioning. I think you meant a Nissan Terrano? It could be something as simple as a sensor went bad or a hose came loose, to major turbo or engine damage. I would check to see if any of the intake hoses are not connected or loose first, then go from there. The vehicle's computer knows the ballpark value of the boost pressure, but the sensor is sending no signal (or completely erroneous values), so the computer cuts fuel in order to prevent serious engine damage.


P0235 Turbocharger Boost Sensor Circuit Malfunction

Nissan Terrano II

http://www.contactmagazine.com/Issue54/EngineBasics.html

Feb 02, 2016 | Nissan Cars & Trucks

1 Answer

Nissan terrano owners club


what fault code do you have. If you changed the crankshaft sensor you also need to change the camshaft sensor, they go hand in hand.

Aug 06, 2014 | 2005 Nissan Terrano 2.7

1 Answer

How to get the abs light to go out on a 1996 nissan terrano


Get the ABS system fixed, that usually turns the light off. Get the computer scanned for the fault codes and work from there.

May 19, 2014 | 1999 Nissan Terrano

1 Answer

How to disable abs light


I hope you are not serious.

If you are, please send me an updated spreadsheet of where and when you will be driving on a public road so I can stay home and out of your way.

When you crash the least you will be liable for is reckless driving, the most: probably will be reckless driving causing death.

Fix the ABS...

May 19, 2014 | 1999 Nissan Terrano

2 Answers

1988 Nissan Terrano/Pathfinder big problem!!!!


Have you all checked the Oxygen sensor? And the Mass Airflow sensor? Either of those could do it. If both of those check out, make sure the fuel pump relay is kicking in/out, and make sure it works period.

Jul 24, 2010 | 1988 Nissan Pathfinder

3 Answers

I have a 01 Terrano and the ABS sensor lights keeps coming on and off, the computer is telling the mechanic a G sensor but he doesn,t no what that is? Any help on this? also when the steering is locked...


Abs sensors work by an electric eye ( similar to the chime at a shop door) shining on a toothed "gear" on each wheelhub, these detect which wheels are turning and which are locked. Dust and mud can get into plugs and more rarely cake around the teeth on the "gears" .
If you are getting noises from the front end on lock something may be seriously worn or damaged in the hub.
First step is to isolate where the noise is coming from then dismantle and investigate. Nissans have notoriously dodgy wiring so make sure it is all clean and in good condition after fixing the clanging.

Mar 11, 2010 | 2001 Nissan Pathfinder

1 Answer

ABS FAULT WITH NISSAN TERRANO YREG


Had same fault - was damaged wiring in loom at back of engine where main engine harness meets the bulkhead.

There is a screened cable grey/pink that houses the two O/S/F ABS wires blue and pink. The loom copex cuts through the ABS cable causing this fault. Take a look at link below:

http://www.bba-reman.com/forums/Topic79424-1-1.aspx

Jun 12, 2009 | 1997 Nissan Pathfinder

Not finding what you are looking for?
1999 Nissan Terrano Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...