Question about 2007 Volkswagen Jetta 2.5 Sedan

Open Question

Jetta 2008 wiper motor not working - 2007 Volkswagen Jetta 2.5 Sedan

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 89 Answers

SOURCE: steps for replacing wiper motor for 1998 VW Jetta

remove wipers. remove plastic covering by loosening plastic screws first. unplug wiper motor wires. there are about three 10mm nuts at the motor location and you also have to unscrew the big nuts that were below the wipers when you unscrewed them. replacement is reversal.

Posted on Mar 26, 2009

  • 119 Answers

SOURCE: My wipers only work on my 98 Jetta when I tap for

I wouldnt like to garantee it, but it sounds more like a fault with the wiper switch

Posted on Nov 11, 2009

  • 105 Answers

SOURCE: 2005 jetta wiper motor not working. Washers not

central locking relay its conected to all these could be the culprit

Posted on Dec 17, 2009

  • 12 Answers

SOURCE: The winshield wiper on my 2007 Jetta its no

You likely don't need a new motor. You just have to get your wipers repacked with grease.

Posted on Feb 19, 2011

sambo59
  • 74 Answers

SOURCE: 2002 Jetta - Replaced the

Need only adjustment.Open again the plastic covers to rich the viper blade mechanism then loose the nut of the motor and make it in 180degreace.Before that make sure that viper blades are again in the middle of the windscreen.Thats not easy but you can do it.Never happening from first time.

Posted on Jun 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 vw jetta wiper still not working after changing the wiper motor and wiper switch ? help


Did you check the fuse? Have power at the plug? could be a bad ground.

Dec 06, 2015 | Evan Cars & Trucks

2 Answers

Wiper blades suddenly stop working.


Most likely the multi function switch on your steering column
wiggle it around of the problem comes and goes you've found the part to replace if the vehicle is older it could be loose wiring connectors wiggle then with wipers on if problem comes and goes replace wires as necessary

Aug 01, 2014 | 2008 Volkswagen Jetta

1 Answer

2000 jetta wipers wont work


Washer fluid is probably frozen, have you checked the fuse for the wipers? There should be an overload protection in case the blades stick

HTH

Jan 15, 2013 | 2000 Volkswagen Jetta TDI

1 Answer

Just replaced the wiper motor on Jetta and wipers still won't work


Have you replaced only the motor or including the gear box (where the input shaft to the linkages is located)?

Oct 23, 2012 | 1999 Volkswagen Jetta

1 Answer

The winshield wiper on my 2007 Jetta its no


You likely don't need a new motor. You just have to get your wipers repacked with grease.

Dec 27, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

2005 jetta wiper motor not working. Washers not


central locking relay its conected to all these could be the culprit

Dec 16, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

The divers side wiper does not rotate passenger side does how do i remove plastic cover to see if pin clip or spline is broken? 2008 jetta


look inside the grooves for screws, remove and cover comes up you will have to remove wiper arms also. first make sure the nut at the end of arm is not loose, that a common problem.

Dec 13, 2009 | 2008 Volkswagen Jetta

2 Answers

Steps for replacing wiper motor for 1998 VW Jetta 4 cyl.


remove wipers. remove plastic covering by loosening plastic screws first. unplug wiper motor wires. there are about three 10mm nuts at the motor location and you also have to unscrew the big nuts that were below the wipers when you unscrewed them. replacement is reversal.

Mar 23, 2009 | 1998 Volkswagen Jetta

1 Answer

I have a 2008 vw jetta and the other day we had a snowstorm when i started the car and turned on the wipers they made a pop sound and wont work now.


I LOVE YOUR SCREEN NAME!!!!!!!!!!!!!!!!!!!!!!!! The Motor is Bad or you have a Broken Linkage. You can Check for a Broken Linkage By having someone hold the Switch in and see if you here the Motor make any Noise. If Not, You will need a New Wiper Motor. Please Rate My Response! Thanks!

Jan 31, 2009 | 2006 Ford F 350 Super Duty

Not finding what you are looking for?
2007 Volkswagen Jetta 2.5 Sedan Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...