Question about 2001 Pontiac Sunfire
If I am not misstaken the clutch adjustment can only be done at the clutch pedal itself, in or out to set what is called freeplay.
Posted on Jan 04, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger
Posted on May 06, 2009
SOURCE: A/C Orifice Tube on Sunfire
Hello lindabg68: My name is Roger and I can answer your question for you. First make sure the system has no pressure. Locate the high side refrigerant line that comes up from the bottom of the condenser. Not the top line. Remove the bolt holding the line together. You should see the orifice tube in the long side of this tube. Please rate the quality of your answer. This is how we know you received the correct information. Should you need more help please just ask. Thank You for using FixYa. Roger
Posted on May 08, 2009
You need to raise the vehicle and start it. Remove the plug near where the passenger side driveshaft comes out. The head of the plug is 7/16. Trans fluid will stream out of the hole when the engine is running when the transmission is full, If fluid doesn't run out, fill the trans until fluid runs out. The fill cap is red and it is on top under and around the air cleaner box. If you need more help let me know.
Posted on May 26, 2009
IAT stands for Air Intake Temperature Sensor and it is located in the intake tube coming from the air filter box tot he engine. Easiest way to find it is look at the top of your engine where it says 2200. Coming right out of that manifold is a black ribbed tube about the size of a baseball to softball. It should be going towards the direction on the front drivers side. on the back side of that tube, about 4 inches away from the intake manifold (the things that says 2200) is a plug with wires. That is your IAT Sensor. If it is unplugged, plug it back in. Otherwise unplug it and replace it. Make sure to disconnect the battery while you do this so the computer resets itself after the new one is installed. Thanks and please don't forget to rate!
Posted on Jul 15, 2009
Your thermostat is located under the thermostat housing, which is what the upper radiator hose clamps to on the top of your engine. Basically, you need to start with a cold engine, drain your radiator, then unclamp the upper radiator hose from the engine. Remove the bolts from the thermostat housing, and gently tap on it to remove it. clean up the mounting surfaces on both the engine and the housing, and install a new thermostat, and new gasket. tighten to proper torque, reconnect the radiator hose, then refill up the radiator and cooling system.
Posted on Nov 24, 2009
Testimonial: "Thank you, very helpful"
Tips for a great answer:
Jan 08, 2016 | 2001 Pontiac Sunfire
Jul 26, 2014 | 2003 Pontiac Sunfire
Oct 23, 2012 | Cars & Trucks
Sep 25, 2011 | 1999 Pontiac Sunfire
Jan 10, 2011 | Pontiac Sunfire Cars & Trucks
Jul 25, 2010 | 1996 Pontiac Sunfire
May 01, 2010 | 2001 Pontiac Sunfire
Mar 14, 2010 | 2001 Pontiac Sunfire
237 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: