Question about Cars & Trucks
Neutral safety switch at pedal has been replaced, depress clutch pedal it wont start, engage bypass switch it starts. Can you help
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: neutral safety switch....I think
The switch is located at the top of the clutch pedal assembly, above your feet. Its a little cramped, but its a simple dc two wire switch, you should be able to check it with a meter for power and to see if the switch does indeed need replacement. If thats the problem, when you see the new switch, you'll know it goes in, very easy. good luck
Posted on Aug 12, 2008
Did you bleed the system? There is probably a bleeder on the slave cylinder and you may need to jemmy the selector fork/ Also look fro a damper valve between the master and slave cylinder... it will need bleeding too.
Posted on Nov 07, 2008
SOURCE: clutch won't engage
There is a problem with the pressure plate spring or possibly the throwout bearing is bound up,you should be able to pull the rubber boot from around the clutch fork and have someone depress the pedal,you should be able to see if it's a problem with the bearing.Unfortunatly the trans is probably going to have to caome off.
Posted on May 25, 2009
Tips for a great answer:
Mar 13, 2016 | Ford Cars & Trucks
Feb 05, 2014 | Cars & Trucks
Nov 24, 2012 | 1993 Geo Prizm
Jun 22, 2012 | 1992 Toyota Paseo
Jul 29, 2011 | Chevrolet S 10 Cars & Trucks
Feb 16, 2010 | 1995 Toyota Pickup
Aug 05, 2009 | 1989 Toyota Corolla 2 Door
Mar 21, 2009 | 1997 Toyota Tacoma
Dec 14, 2008 | 1989 Toyota Tercel Liftback
54 people viewed this question
Usually answered in minutes!