Question about Nissan Quest
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Nissan Quest 1996 minivan
you need to remove the lower balljoint and the center nut and it should come right out. use pb buster or wd-40 on the splines. they tend to rust up
Posted on Oct 02, 2008
if all fuses are ok witch i guess they are, or none of the windows would be working, i would say it could be just the switch. if you can take the master switch bezel off with out taking door panel off, you might be able to chg. just the switch. or at least test it without switch hooked up and see if motor works .
Posted on Jan 15, 2009
There is no other way other than to remove the engine.I now its a lot of work but if you want to do the job properly then thats the way to do it.You can remove the gearbox and try.I think thats a waist of time good luck.
Posted on Jul 28, 2009
Try adjusting the lower latch located on the floor (where the door locks) by loosing the 2 star shaped bolts and moving it a BIT (1mm or 2mm) forward and tightening them again.
Posted on Jan 11, 2010
1st need check fuses for windows next check switch capability by switching up and down see if window will respond next check power to switch next check power to window motor if all ok replace window motor don't forget to check window rail make sure not jaming
Posted on Jan 18, 2010
Tips for a great answer:
Dec 18, 2014 | 2008 Nissan Quest
Jun 03, 2012 | 2001 Nissan Quest
Mar 24, 2012 | 2006 Nissan Quest
Sep 16, 2011 | 2004 Nissan Quest
Oct 13, 2009 | 2007 Nissan Quest 3.5 Minivan
Oct 12, 2009 | 1995 Nissan Quest
Mar 31, 2009 | 2001 Nissan Quest
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: