Question about Buick Cars & Trucks
My 2003 Buick Regal has started randomly beeping from the dash. Any idea what this means?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: signal bulb on 2003 buick regal
To change front turn signal –
open the hood; look in back of headlight; two white clips; pull straight up, and then whole headlight comes out including turn signal; it is all one unit; remove rubber cover, then you take bulb out of unit. Mechanism that bulb fits in will need to be turned clockwise (looking from the front) and pulled to get it out of the larger unit holding all lights. Be sure and put rubber cover back on before re-inserting the two white clips.
Posted on May 07, 2009
U need to clear the AC condensation drain, crawl under the car on the passenger side and near the base of the engine firewall u will find a drain pipe, (about 3/4") clear t and the water will stop going on the passenger floor.
Posted on Aug 30, 2009
several things to check out:
get it started and go have the battery, alternator, and voltage regulator tested. No charge at most parts stores.
IF they all test ok then you will need to remove the starter and have it tested. The solenoid could be bad. Was it wet outside the day it wouldnt start? if so then oisture is probably getting into the solenoid.
Posted on Oct 09, 2009
It is your Instrument cluster, see my answers to this question and write me if you have any more questions, it cost me a total of no more than $15 dollars to fix it myself, took be about one hour.
Posted on Jan 07, 2010
I ran into this problem w/a 98 GS. One branch of the ignition switch was not making contact because the switch, which is plastic, melted around the terminal and created an intermittent contact. To verify the problem. go to the fuse box & run a jumper wire from the hot side of the directional fuse to the hot side of the windshield wiper fuse. This will feed power to the circuit that the switch isn't powering. If this gives you 100% reliability, replace the switch.
Posted on Mar 30, 2010
Tips for a great answer:
Jan 14, 2016 | Buick Cars & Trucks
Apr 30, 2013 | 2003 Buick Regal
Dec 02, 2010 | 2003 Buick Regal
Jul 13, 2010 | 2003 Buick Regal
Mar 30, 2010 | 2003 Buick Regal
Dec 19, 2009 | 2003 Buick Regal
Dec 12, 2009 | 1998 Buick Regal
20 people viewed this question
Usually answered in minutes!