Question about 1993 Mercury Grand Marquis

1 Answer

Tail Lights When i pull the switch for the lights to come on, everything but the taillights come on. then the taillights keep flicking on and off the more that i drive

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

It sounds like you need to eliminate the problem, step by step. The first step, is to check the tail lights, to see if they are loose. Next step, check the wires leading from the tail lights, to see if they are bare & touching something. Next, check your fuses, to see if they are loose. Finally, if that doesn't help, go purchase new tail lights and replace them and see if that works.

Posted on Jan 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Taillight fuse to 1999 Mazda protege keeps blowing out


need to inspect the bulbs and holder of the tail lights

bad earth , corrosion ,

if brake lights faulty could also be pedal activation switch

if no better
it may be the tail light switch at the dash

26330391-boswbrxlq4nln5ke5apnrlsq-3-0.jpg

26330391-boswbrxlq4nln5ke5apnrlsq-3-1.jpg

Oct 28, 2016 | 1999 Mazda Protege

1 Answer

I have no headlights, taillights, cluster lights and speedometer has stop working?


Have you checked applicable fuses for everything except head lamps? The headlamps themselves don't use a fuse. Check the battery junction block under the hood, one of your positive battery cables should go to junction block. If several fusible links check them. My info shows red wire carries battery voltage to head lamp switch for headlamps. The headlamp switch has two voltage circuits, mainly, one for the head lamps, for the other lamps that the switch controls, those smaller lamps are fuse protected.

Dec 02, 2015 | GMC Sierra 1500 Cars & Trucks

2 Answers

1999 dodge intrepid. Dash cluster went out as well as the tail lights. But if i pull and HOLD the highbeam switch dash and taillights work . why?


Hello Mike, I suspect you have a bad multi-function switch that operates your headlights, tail lights, turn signals, wipers and washers.

Oct 13, 2015 | Dodge Cars & Trucks

1 Answer

The brake light does not work


Open the hatch. Then look for round plastic covers behind where the taillights are . Use a screwdriver to pop them open. Then you will see a knob. Unscrew that knob an the whole taillight can be pulled away from the body of the car. Replace bulb and install everything the same way.

Mar 28, 2014 | 2002 Volkswagen Beetle Turbo S

1 Answer

My monte carlo 2003 does not have taillights everything works except taillights and dash lights


2 things to look at is the directional switch and or brake light switch on the brake pedel. my 1999 monte had the same thing and I replaced thedirectional switch and it was fixed

Oct 29, 2012 | 2003 Chevrolet Monte Carlo

1 Answer

Taillights will not work


Unplug the connector going to your tail lights. Check for voltage and ground to the connector. If you do not have voltage, check the fuse (locations can be found in your owners manual). If the fuse blown, check to make sure the wiring harness is not rubbing through a the hinge on your trunk ( a common problem). If the fuse is good, suspect a faulty headlamp switch. The headlamp switch supplies seperate system voltages to the headlamps, front marker lights, and tail lamps. One system can fail without affecting the others if the headlamp switch is bad.

Aug 15, 2012 | 1997 Mazda Millenia

1 Answer

When I turn on my headlights my taillights flick off an on. Could problem be fuse or bulb


try putting a new earth lead from neg on battery
to a cleaned metal part of the body
if this do's not work.
i would start looking at the light switch

Apr 07, 2012 | 1994 Mercury Grand Marquis

2 Answers

I have a 1988 caprice classic my headlight, brakelights,hazarad lights works but i have no taillights why it want work


it could be the dash board light switch is bad.
may be fuse.
check for power at the tail lights with test light or meter.
may be a fault ground ( not likely) or a bad taillight wire.
did you check the bulbs they have more then one filament in them.

Apr 05, 2011 | Chevrolet Caprice Cars & Trucks

Not finding what you are looking for?
1993 Mercury Grand Marquis Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

71525 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...