Question about 1995 GMC Sonoma

3 Answers

No reverse after rebuild on 4L60E Transmission from 1995 GMC Sono

I rebuilt the trans (4l60E) in my 1995 GMC Sonoma and forward gears work but no reverse? Also has a slight whine in Drive?

Posted by on

  • 3 more comments 
  • grave2950 Mar 23, 2009

    i have a 1992 chevy silverado 4x4 stepside truck and when in forward it shifts perfect, but has no reverse at all, when i put it in reverse its like i have it in neutral, has no leaks or and other problems that i know of,,,,,, i have been told that on the 700r4 trannies, the low gear and reverse work off the same clutch, so why is it that it shifts and works fine in forward but no reverse??? the truck has a 3.4l v6 with auto tranny, and 4wd works fine as well, any help will be greatly appreciated,,,,, one more thing, can i replace that 700r4 with a different tranny, is there a better tranny that'll replace it??????????

  • Anonymous Mar 17, 2014

    engine rebuild for 2000 gmc sonoma 2.2 liter engine

  • Anonymous Mar 17, 2014

    engine rebuild for 2000 gmc sonoma 2.2 liter engine

  • Anonymous Mar 27, 2014

    does not slip

  • Anonymous Mar 29, 2014

    transmition issue

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 158 Answers

There isn't a modulator on this trans as it is electronic

You can have first gear going forwrd but no reverse. It is possible. The low/ reverse clutch isn't needed to go forward.

Posted on Apr 02, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

The sun shell is stripped out

Posted on Nov 16, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

Check vacuum lines and modulator valve. Also check shifting linkage????


Are have whomever rebuilt the trans, check it out.

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix automatic transmition in 2002 GMC ENVOY 4x4 shifts hard into third will not shift into overdrive already replaced the two solenoids in front before it would not shift to third


How To Rebuild A 4L60E Automatic Transmission - YouTube

? 13:19
https://www.youtube.com/watch?v=JpmJtuVrdWk
Mar 16, 2011 - Uploaded by Nick Stageberg
How To Rebuild A 4L60E Automatic Transmission ... Also here is a link to some common break/fixes that may require a rebuild:... GMC canyon, envoy, safari savana, sierra Sonoma, Yukon, ....Great video, my 96 sierra 4x4 when shifting into high gear motor races as if nothing is there........................always ...

30 Common 4L60E Transmission Problems & Repair ...

www.twincharlotte.com/transmission-repair.../30-Common-4L60E-Trans...
Mar 18, 2011 - The 4L60-E is an automatic shift, four-speed overdrive, longitudinally...... 4l60e 2002 gmc 4x4 was not driven for 1 year,will not shift into 3rd or ... I have a 2005 GMC envoy 4x4 6 Cylinder I assume it is a 460LE Transmission.

Nov 24, 2015 | GMC Cars & Trucks

1 Answer

Put a 96 or 97 4l60e in my 94 gmc now got backfiring and drivabilty problems can i change the wiring in the transmission to fix this


Trans shouldn't make it backfire,are you sure the dist. cap didn't hit the firewall when the trans came out and get damaged?

Dec 10, 2013 | 1995 GMC Sonoma

1 Answer

I HAVE A 2000 GMC 4L60E TRANS.ALL FORWARD GEARS WORK OK AND REVERSE WILL ONLY WORK WHEN I FIRST START IT.WONT GO IN REVERSE AFTER IT WARMS UP?


the reverse clutches are going bad in the trans or your fluid need to be fully flushed out and filter needs to be changed and just a suggestion use a quart of lucas transmission fluid in your transmission

Feb 17, 2010 | 2002 Chevrolet Silverado

2 Answers

1995 Chevy S10. The transmission (4L60E) has been


HI YOU MAY HAVE A BAD IGNITION SWITCH OR YEST A BAD SHIFT SOLENOID 3-4

Jun 25, 2009 | 1995 Chevrolet S-10 CA Edition

1 Answer

4l60e automatic tranny rebuild issues


I have also personally seen/fixed a 4L60E that had a broken reverse servo piston,it is the piece that engages the low/reverse band under a cover in the valve body area,a piston with a band engagement pin. Anyone that has this problem can have it repaired in the vehicle,its worth checking BEFORE replacing the trans unless the fluid is burn't or there are other symptoms present. Good luck and hope this helps. keep me posted, be glad to help

Jun 20, 2009 | 1997 GMC Jimmy

1 Answer

Rebuilt my 4l60e and every gear works


look at reverse servo piston. it affects the reverse band.

Apr 07, 2009 | 1995 GMC Sonoma

4 Answers

1995 chevy not going into reverse


check link to trans to see if is working when you select it to reverse are could be trans pump in the trans may need to rebuild the trans

Jan 21, 2009 | 1995 Chevrolet K1500

1 Answer

Rebuilt the Trans.(4L60E) in my 1995 GMC Sonoma PU and after installing it I have no reverse? What went wrong? all forward gears work fine. Also seems like there is a slight whining noise in forward...


did you do the rebuild or did a shop do it? it sounds like the clutches werernt done properly. if the reverse is out the other gears will go out too if driven too far in that condition,

Jan 19, 2009 | GMC Sonoma Cars & Trucks

Not finding what you are looking for?
1995 GMC Sonoma Logo

2,689 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...