Question about Cars & Trucks

1 Answer

A160 auto keeps stalling at a junction

Engine stars ok . but stalls when slowing down. restarts ok

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check fuel filter, a partially plugged filter will not supply demand on take off.
Fuel injectors may be gummed up so use a fuel injector cleaner with next fill up at the pumps.
Check plugs and plug wires.
The most expensive piece to replace is the fuel sensor so check that last.

Posted on Jan 04, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1118 Answers

SOURCE: 1995 Buick LeSabre - Stalls then restarts while driving

Has the fuel filter been chg. lately. If it has, maybe a fuel pressure test is in order. Fuel pump might be geeting weak and does not show up until it gets warmed up. Fuel pumps are a common problem on this type of cars.

Posted on Apr 03, 2009

  • 3 Answers

SOURCE: BMW 316i KEEPS STALLING WHEN SLOWING DOWN AT JUNCTIONS

at the engine, there is a small sensor that helps increase or decrease the rpm of the engine. Perhaps yours is soo low, that when you slow down, it's almost about to stop.

The other problem could be the airfilter sensor. If it's not properly fixed or if the sensor itself is a bit damaged, than the engine is not getting enough air and so, let's the engine almost go off.

Please give further details if this has not helped.

thank you

Posted on May 07, 2009

dncholas
  • 222 Answers

SOURCE: 1998 range rover p38 2.5 dse auto engine stalls

Sounds like something is overheating then and possibly a sensor. Not familiar with Rovers but might be a problem with the CAS and/or CPS which tells the ECU the motor is running and when to fire. Also maybe the IAC is bad and when you go from throttle to idle it can't control it and allows it to die.

Posted on Aug 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Prblem engine code po410


P0410 Secondary Air Injection (AIR) System

Apr 15, 2013 | 2002 Oldsmobile Aurora

1 Answer

Onwants to stall when first starting when cold out


When the coolant temp.sensor fails it causes the engine to flood and be slow to start.Turn it off and it will restart normally. Change the sensor. The engine will start normally and fuel mileage will improve.

Feb 25, 2013 | 1997 Lincoln Town Car

2 Answers

When I slow down to a complete stop, my 1999 chrysler sebring cuts off. Can you help me?


Possibly a transmission issue. The transmission has a "lockup" mode, where a clutch connects the engine directly to the transmission at cruising speeds. It is then supposed to unlock at lower speeds and for stopping. If it doesn't unlock, the car will stall at a stop. Try putting it into neutral (carefullly, so you don't go into reverse) as you slow down, if it doesn't stall out, it is most likely the transmission lockup mechanism.

If it stalls in neutral it is an engine issue. Bad idle control, bad ignition (it's easier to fire at high speed), bad fuel injector, bad air flow/pressure sensor... and more possibilities.

Feb 02, 2010 | 1999 Chrysler Sebring

1 Answer

1998 range rover p38 2.5 dse auto engine stalls


Sounds like something is overheating then and possibly a sensor. Not familiar with Rovers but might be a problem with the CAS and/or CPS which tells the ECU the motor is running and when to fire. Also maybe the IAC is bad and when you go from throttle to idle it can't control it and allows it to die.

Nov 29, 2009 | 1998 Land Rover Range Rover

1 Answer

1999 nissan pathfinder jerks and stall when slowing down or at red light


YOU might find its due to the Auto Matic gear box as when you slow down at the lights or brake hard to stop the auto box should brake free at about 600rpm as to allow the car to stop but the engine to keep idling,but the drive bands in the gearbox and the pump which operate them are not braking free so its like, in a Manual g/box driving and stopping but leaving the clutch pedal and not pushing it in so the car stalls,
SO you may find that the next time you are driving it and come to the lights just try putting it in NEUTRAL gear before you stop and try, if it ok then get the g/box serviced . RON

Nov 18, 2009 | 1999 Nissan Pathfinder

1 Answer

Revs drop coming to standstill


Here is the cause of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

May 12, 2009 | 1999 Mazda 626

1 Answer

BMW 316i KEEPS STALLING WHEN SLOWING DOWN AT JUNCTIONS


at the engine, there is a small sensor that helps increase or decrease the rpm of the engine. Perhaps yours is soo low, that when you slow down, it's almost about to stop.

The other problem could be the airfilter sensor. If it's not properly fixed or if the sensor itself is a bit damaged, than the engine is not getting enough air and so, let's the engine almost go off.

Please give further details if this has not helped.

thank you

May 06, 2009 | 1997 BMW 318

1 Answer

Ford ka stalling


Sounds like a vacuum line.

Apr 24, 2009 | 2000 Ford Focus

1 Answer

1995 Buick LeSabre - Stalls then restarts while driving


Has the fuel filter been chg. lately. If it has, maybe a fuel pressure test is in order. Fuel pump might be geeting weak and does not show up until it gets warmed up. Fuel pumps are a common problem on this type of cars.

Apr 03, 2009 | 1995 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...