Question about 2004 Mazda 6 Sport

1 Answer

Mazda 6 2005 driver door jammed

If i keep trying to unlock it with the key it may open then it want close

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 14,036 Answers

If you talking about door latch wont let door close.try to reset all door locks.first if you cant get door close.work unlock button with remote or door switch.then hold open door handle while you flat screw driver pull up latch in door latch should stay up so door will close.once get door close.try resetting all door locks by sitting inside vechicle with all doors close.remove key from ignition.open drivers door.wait 24 seconds.turn ignition switch on and back to lock position 3 times.press and release drivers door courtesy light 3 times.ensure doors lock and unlock.if not wait 40 seconds and repeat procedure.if this procedure fails. you have problem in the door latch and lock mechanism inside the door itself.

Posted on Jan 04, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Door is stuck

I have had this on both of my front doors. What happens is that the door opening mechanism has rusted on you. It is like if you were holding the inner door handle open. The door won't unlock then, and the key won't go all the way on the outside. I have had to remove my door panels (NOT easy with the door closed...) and lubricate heavily the mechanism. Then the cable for the door handle went back in place.

You might be lucky and be able to get the door open by pushing the handle cable back in and it might release the mechanism, and then you will be able to open the door and remove the panel easily.

I believe that the problem lies with the seal for the window that can channel water to drip directly onto the mechanism. You will see it once the door panel is removed and you take the plastic off.

Posted on Jul 31, 2008

  • 200 Answers

SOURCE: Door won't lock and alarm keeps sounding

It's always a good Idea to check fuses first, as that is the easiest thing to fix.  I would suspect if its not a fuse it may be the door open sensor, if you open the door there should be a device in the door frame of the car where the door connects to the car door hinges.  If you push that sensor in with your finger it should turn off the interior lights.  It may be wiring to that sensor, or the sensor itself, also the sensor may have worn out to the point where it does not push in enough to activate the switch anymore.  good luck.

Posted on Oct 24, 2008

  • 1 Answer

SOURCE: mAZDA mILLENIA 1997

Take some "electoclean" spray and hose down the key slot ( 4 bursts). Then spray the key and insert to work it around. My car did the same thing and it clears the beeping noise and allows the security system to engage.

Posted on Feb 22, 2009

  • 63 Answers

SOURCE: Tribute passenger door will not unlock

this ones trick but ive done it. you have to carfully pry back the top part of the door panel and you should get enogh room for a small arm to fit in and manuall pull up on the relese lever for the latch to the door then you can take the door apart for inspection

Posted on Mar 20, 2009

  • 84 Answers

SOURCE: lectrical problem

check your owners manual, i know my car would do such a similar thing all i done was look in the manual and it told me how to disable the autolock feature. if you disable this you will still have use of your keyless entry but it sould diable the auto locking. hope this helps

Posted on May 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 mazda 6 estate front driver side will not open with the key or fob


the 1st answer makes sense however since the fob isn't and the key isn't may possibly have a frozen (rusted) latch which may be freed up with some sort of penetrant oil, or just maybe the latch mechanism itself (lock actuator \) it bad ...the trim panel on the door will need to be rmoved to daignose

Jan 08, 2015 | 2004 Mazda 6 1.6

1 Answer

Mazda 3 2010 driver's door locked and won't open


This is what fixed the my car's driver's door that was stuck closed and locked: the plastic piece that function as the manual lock/unlock on the inside of the door (it's black but when the door's unlocked it has a red side facing out) had essentially popped out and everything was jammed. So you push the button back in while you flip the inside handle open. But maybe I was lucky, in that it was only the button that was jammed.

Feb 03, 2013 | 2010 Mazda 3 1.6

1 Answer

Having trouble with keyless remote control on 1993 lexus es300. Replace battery on remote- still not openning doors. Help Please!


Try reporgraming it

1. Start with key out of ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into the ignition (Do NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.

5. Press any button on remote for a minimum of 1 second.
System should now lock and unlock doors once.

6. Close and open drivers door.

7. Press any button on remote for a minimum of 1 second. System should now lock and
unlock doors. Once to confirm programming, twice to indicate programming failed.

8. Repeat steps 5, 6 and 7 for additional remotes.

Jan 02, 2013 | Cars & Trucks

1 Answer

Keyless entry not working


Programming
When
Remote control added or replaced. System malfunction.
How
Obtain all remote controls. Remove key from ignition switch. Close all doors. Open driver's door. Carry out the following within 24 seconds: Turn ignition switch ON and back to LOCK position 3 times. Remove key. Press and release driver's door courtesy light switch 3 times. Ensure doors lock and unlock. If not, wait 40 seconds and repeat procedure starting with driver's door already open. Press each remote control lock or unlock button twice. Ensure doors lock and unlock after each remote control operation. If not, proceed as follows: Press and release driver's door courtesy light switch once. Ensure doors lock and unlock twice. Repeat procedure starting with driver's door already open.
NOTE: A maximum of 3 remote controls can be programmed.

Mar 29, 2010 | 2004 Mazda 6

3 Answers

Program remote control for mazda mpv 2002


Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done

Dec 06, 2008 | 2000 Mazda MPV

1 Answer

MAZDA mILLENIA 1997


Take some "electoclean" spray and hose down the key slot ( 4 bursts). Then spray the key and insert to work it around. My car did the same thing and it clears the beeping noise and allows the security system to engage.

Oct 24, 2008 | 1997 Mazda Millenia

1 Answer

Jam door locks


How about the passenger side - does it unlock with the key and switch there? Can you open the drivers door with a key? If both these are true, probably the unlock switch on the drivers door is faulty.

Jul 12, 2017 | 1988 Cadillac Sedan DeVille

1 Answer

Programming keyless remote


2003-04 Mazda 6 REMOTE PROGRAMMING


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the driver’s door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the driver’s door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) twice. Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!

Good Luck.

Jul 12, 2008 | 2003 Mazda Mazda6

1 Answer

Door is stuck


I have had this on both of my front doors. What happens is that the door opening mechanism has rusted on you. It is like if you were holding the inner door handle open. The door won't unlock then, and the key won't go all the way on the outside. I have had to remove my door panels (NOT easy with the door closed...) and lubricate heavily the mechanism. Then the cable for the door handle went back in place.

You might be lucky and be able to get the door open by pushing the handle cable back in and it might release the mechanism, and then you will be able to open the door and remove the panel easily.

I believe that the problem lies with the seal for the window that can channel water to drip directly onto the mechanism. You will see it once the door panel is removed and you take the plastic off.

Jul 03, 2008 | 2003 Mazda MPV

2 Answers

Keyless entry remote


Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks.

Jun 20, 2008 | 2002 Mazda Protege

Not finding what you are looking for?
2004 Mazda 6 Sport Logo

526 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...