Question about Cars & Trucks
My reversing light is,nt working i,ve changed the bulb found the fuse box but don,t know which one to change owners manual has page missing which fuse do i need to change
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The switch is on the gearbox, But not sure of the exact location for your model. But guess there are not many other wired items on the gearbox.
Posted on Jul 11, 2008
SOURCE: don`t know where fuse box is?
there is a fuse box under the dash on the driver side close to the door on the driver side up by the brake pedal at the top and there is one under the hood as while.
Posted on Feb 08, 2009
Press and hold the SELECT/RESET
control switch to select SYSTEM
CHECK when “SYSTEM CHECK /
HOLD RESET” is displayed in the
message center. Selecting this
function from the SETUP MENU
causes the message center to cycle through each of the systems being
monitored. For each of the monitored systems, the message center will
indicate either an OK message or a warning message for two seconds.
Pressing the SELECT/RESET control switch cycles the message center
through each of the systems being monitored.
The sequence of the system check report and how it appears in the
message center is as follows:
1. OIL LIFE RESET
2. CHARGING SYSTEM
3. WASHER FLUID
4. DOOR AJAR
5. EXTERIOR LAMP
6. BRAKE SYSTEM
7. PARK BRAKE
8. MILES TO EMPTY
9. FUEL LEVEL LOW (will only display if 50 miles or less to empty)
To reset the oil monitoring system to 100% after each oil change
[approximately 5,000 miles (8,000 km) or 180 days] perform the
1. Enter SYSTEM CHECK to display
“OIL XXX% RESET IF NEW”.
2. Press SELECT/RESET control
switch to display “HOLD RESET IF
3. Press and hold the
SELECT/RESET control switch for
more than 2 seconds. Oil life is set
to 100% and “OIL CHANGE SET TO
100%” is displayed.
Posted on Apr 02, 2009
Probably sorted by now but in case anyone gets the same problem. Check all the red fuses in the main fuse box, not just the one the handbook says it should be. The main fuse box is behind the glove box...push in the sides and the gb will drop down....the fuse box is facing you.
Posted on Aug 18, 2009
On the side of your transmission will be a switch with several wires coming out of it. This is your reverse switch that turns on your reverse lights and most likely needs to be replaced
Posted on Oct 01, 2009
Tips for a great answer:
Mar 26, 2016 | 2007 Ford Focus 2.0
Jan 24, 2013 | Ford Cars & Trucks
Sep 22, 2012 | 2002 Ford Taurus
Jul 11, 2012 | Ford Focus Cars & Trucks
Jul 04, 2011 | Ford Expedition Cars & Trucks
Dec 09, 2010 | 2007 Ford Focus (3 Door) Hatchback
Oct 22, 2009 | 2000 Ford Focus
Jul 30, 2008 | 2003 Ford Focus
165 people viewed this question
Usually answered in minutes!