Question about Cars & Trucks

Open Question

On citroen relay van settings 1 2 3 on heater not working setting 4 is working

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 667 Answers

SOURCE: heater fan only works on fastest speed

Your blower motor resistor has gone bad, it should be located next to your blower motor in the car, held in place with a couple of screws, remove it and replace it. The resistor is responsible for making the blower motor run at slower speeds than high or (4). Let me know if this helps.

Posted on Jun 16, 2009

  • 2 Answers

SOURCE: VW Mk 4 golf heater fan settings 1-3 not working but 4 does

It's most likely to be the resistor, it's a common problem. You should be able to get one at your local motor factors or breakers yard and they are generally easy to fit. Not sure of its position on a golf - check a haynes manual or ask your local garage.

Posted on Sep 22, 2008

  • 7353 Answers

SOURCE: i have a2001 chevy silverado 1500 heater was not

I would replace the blower resistor first. its down by the blower motor.

Posted on Oct 16, 2009

  • 48 Answers

SOURCE: 2003 dodge stratus heater fan does not blow

The car most likely has a blower motor resistor, if it is like my 2004 dodge dakota, you're lucky, when mine quit it was very cold and the first portion of the resistor burned out, taking out all four fan speeds. Enough about me, lets get to your problem. the blower motor resistor is located inside the HVAC duct, (heating, ventalation, and cooling) on the passenger side footwell area. it is accessed from inside the passenger compartment. It has multiple resistor circuts. thats why you lost the two lower speeds and then the two faster speeds. You can test it with a multi meter to see if it is open. it looks like this when removed. fb36770.jpg
They are about 33.00 from When you find the conector on the duct that is conected to this resistor block, remove the conector with a small screwdriver, you have to find the lock tab and gently lift it up and pull on the conector to remove the conector. remove one screw and it will come out. most times you can tell if they are bad by looking at them. if you cant test it have someone you know that can do it. I am 99% positive that that is your problem. unless the conector came loose. Pleas let us know if this was helpful as i strive to improve helping others on a daily basis. Good Luck! and You'll be warm again soon.getimage.jpggetimage.php.jpg

Posted on Dec 18, 2009

  • 14 Answers

SOURCE: The heater/air blower has lost


Posted on Aug 17, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need a visteon ecu unit for a Citreon relay van ... 92results for citroen relay ECU

Sep 21, 2017 | Cars & Trucks

1 Answer

Citroen Relay 08 wipers & wash always on

Check wiper relay.
Short circuit in harness.
Check wiper control lever assembly and its contacts.

Dec 21, 2013 | Citroen Cars & Trucks

3 Answers

KEYCODE light permanently lit on Citroen Relay van,

before u buy have trouble code scanned most auto stores offer service for free ==can be as simple as a bad key[not recognized] to big such as electrical anti -theft system

Apr 26, 2010 | 2006 Fiat 124

1 Answer

Heater warms up in morning but over the day only gives cold air despite being set at 22degrees. VW dealership says when set at 22degrees it will warm up to 30degrees and then introduce cold air to bring...

vw fit 3 types of aircon,
1.full climate control (you set temp is stays there)
2.climatronic (as your dealer said.....)
3.aircon std (cold draft)
you cannot change whats fitted to another type.

Apr 08, 2010 | 2004 Volkswagen Eurovan

1 Answer

Hi just pick up a citroen berlingo van 2003/4

you dont need a tool mate just finger and thumb pressure
i have have been working on peugeots for 12 years and never needed to use one of them tools

Nov 22, 2009 | Peugeot 405 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides