Question about Cars & Trucks

Open Question

Brake vacuum light 1995 hino comes on when pushing brake 2 or more times

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
keemo68
  • 1263 Answers

SOURCE: 1995 monte carlo when you

there is a short in the harness for your turn signal dimmer switch . this could be because of a bad connector or your module is bad. this will take a little time but first check the fuse on the brake light side chances are it's blown. next your going to have to check the cionnections under the dash look at the main harness connections. also remove the steering column cover to look at the wiring of the module and the module itself look for loose are bad connections as well. please rate this thanks

Posted on Sep 28, 2008

Ad
STEVIE_N_24
  • 147 Answers

SOURCE: brake lights stay on when brakes are not pushed

Faulty or maladjusted brake pedal switch located near brake pedal pivot point.

Posted on Mar 31, 2009

  • 64 Answers

SOURCE: my 1995 taillights stoped working but when i push

Hi, you might want to look at the earth connection at both tail lights. If the earth connection is faulty the other lights earth through the other circuits connected to the tail lights which will cause the brake lights and turning signal lights to come on at the same time. If the earth connections are fine it might be that you have a short circuit on one of the circuits going to the tail lights.

Posted on Jan 17, 2010

  • 3911 Answers

SOURCE: i have a 1995 chevy c3500 stake truck that every

I think a ******** has got into it:

first make absolutely sure that the correct bulbs are in the right socket. there are two different bulbs that fit the same socket and there being a 50/50 chance generally the odds are against you. if you have ever followed anyone who had one bright tail light and one dim one, you have seen this in action. there is a two element bulb and a one element bulb that both fit the same socket.

second if you have a stake truck then you may have aftermarket tail light assemblies which again means someone who most likely did not know what he was doing wired them in. you have a ground, a hot for lights, a hot for brakes, and a hot for signals. someone could have the hots for brakes and lights spliced together instead of going to the larger wattage element in the two element bulb.

eliminate both possibilities

Posted on Apr 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hino ec100 the engine is runing fine but the brakes is hard and the oil is leaking through a pipe on the brake booster


Clean out the pipe start engine and feel for vacuum from pipe if vacuum ok booster is faulty

Dec 19, 2015 | Cars & Trucks

1 Answer

Why might my 1986 Hino air brake system stop lights not working -- new lead lights on rear all fuses ok das light stating globe out comes on when pedal pressed


most air brakes have a light switch at the base of the treadle valve (foot valve) that is energised when air pressure is allowed through to the brake diaphragms
Check it out as the wire s may be broken of the switch is faulty.

Mar 12, 2015 | Cars & Trucks

3 Answers

My 2001 Ford Taurus shakes really bad. i can just be sitting in it and the whole car will shake. engine light is on, but the brakes are really bad also. what can it be? and how much do you think it wi


Sounds like a really bad vacuum leak, and or possibly a dead spark plug or wire. Check under the hood for a hissing noise. Broken, loose or missing vacuum line. Change spark plugs and wires.

Feb 09, 2013 | Ford Taurus Cars & Trucks

1 Answer

Brake pedal has alot of back pressure and car moves in gear.Have to press real hard to stop.How to check abs pump if has one where or brake booster or master cylinder?Don't know how to trouble shoot or...


The air seeping is a dead giveaway. Your power brakes are now manual brakes, but stiffer. The diaphram in the brake booster has torn and the hissing noise is the engine vacuum escaping (you hear it louder when you depress the pedal right?). Replace the booster and you will be fine. The brake lights probably don't work because you can't push the pedal down far enought to release the switch. Please rate. Thanks.

Sep 03, 2011 | 1995 Mercury Cougar

1 Answer

BRAKES GET HARD WHEN PUSHING THEM


If you have a hard brake pedal, most of the time the pwodber booster is gone. There is possible that the vacuum line going to it is bad or has come off and not providing vacuum to it. Hope this helps and good luck.

Apr 27, 2011 | 1995 Ford F350

1 Answer

I had to change my power brake booster on my 95 chevy 4x4 c 1500. When i put the brake light switch back on it doesnt come on when i push the peddle. when i take it off and push the button manualy it...


IM SORRY BUT I DON;T UNDERSTAND WHAT YOU ARE TRYING TO SAY YOU DID THE VACUUM BOSTER CONTROL UNIT WHAT SWITCH DOSEN;T WORK AND WHAT LIGHT ARE YOU TALKING ABOUT

Oct 18, 2010 | 1995 Chevrolet K1500

1 Answer

Have a dodge 1995 Van and Brake lights won't come on. Replace light bulb and fuses.


Under the dash, follow your brake arm up and you'll find a switch that this arm pushed against (brake light switch). Check to make sure your getting power to one side when the brake isn't applied, and power to both sides when you apply brake. Use a test light.
Hope this helps.

Oct 02, 2010 | 1995 Dodge Ram 3500

1 Answer

My 1995 taillights stoped working but when i push on the brakes brake lights and turning signal lights come on at the same time no turninmg signal flashers will work replace the fuze was not the problem...


Hi, you might want to look at the earth connection at both tail lights. If the earth connection is faulty the other lights earth through the other circuits connected to the tail lights which will cause the brake lights and turning signal lights to come on at the same time. If the earth connections are fine it might be that you have a short circuit on one of the circuits going to the tail lights.

Jan 17, 2010 | 1995 Nissan Pathfinder

1 Answer

Dash warning light


on the 93 there is a problem with the abs system. there are several things that could be wrong. if i remember correctly the module is behind the passenger side kick panel. you will find a single wire coming off the module. if you ground it then turn on the key it will flash the brake lights in the dash. count the flashes this is the code for the error. it will help in the repair. as for the second truck you have a leak that needs repaired.

Dec 21, 2008 | 1995 Dodge Dakota

2 Answers

1995 CAMRY IS STUCK IN PARK


try replacein neutrul safty switch

Dec 09, 2008 | 1995 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...