Question about Cars & Trucks

Open Question

Ford fiesta odometer stays on

Once i turn off the ignition, I lock the car using the remote key, I have noticed the odometer and the radio led/lcd stay on for a considerable amount of time after. I belive this will eventually drain the battery! Does anyone know the fault?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3600 Answers

SOURCE: 2007 hhr. Battery was drained. Mother left lights

your alarm system has been tripped when the battery went dead, to get the information on how to reset the alarm is to call the car manufacture to get the procedure, and should not cost you anything.

Posted on Jun 23, 2010

  • 103 Answers

SOURCE: Fault code P1000 [18,2,10,0],Ford Fiesta 2005

P1000 means that you or someone has disconnected the battery,and the car has not been driven far / long enough for the computer to relearn its stratagies.
Engine light could be the fault of the speed sensor, or wiring to the sensor.

Posted on Jul 27, 2009

  • 2 Answers

SOURCE: my renault laguna 1999 rt remote key fob wont work?

IF YOU TYPE 1999 RENAULT LAGUNA REPROGRAMME KEY INTO A GOOGLE SEARCH, YOU WILL BE ABLE TO PRINTOFF INSTRUCTIONS TO REPROGRAMME THE KEY TO THE KEY READER.THE IGNITION NEEDS TO BE OFF TO DO THIS

Posted on Dec 02, 2009

  • 1 Answer

SOURCE: Mileage light stays on after i lock the car

Sorry not a solution, but same problem, also the radio light stays on, and also drains the battery, did you fix yours??

Posted on Jan 15, 2010

carconet
  • 38 Answers

SOURCE: key stuck in ignition

your ignition have to be replaced focus 2002/7 have that problem and a lot more often if you have a lot of other keys with it,try some wd40 ,but if you do take the key out replace the ignition or you going to get stuck.

Posted on Aug 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 fx4 f 150 just got through disabling door ajar and seatbelt chime now odometer don't work and the radio stays on with the key out of the ignition


somehow I was the annoynmess person with the question about the door ajar and a seatbelt alarm that we disabled, and odometer quitting the radio stayed on well it was just a plug and the odometer speedometer all that works now, but the radio still stay on with a key out of ignition, and now the AC don't cool

May 31, 2014 | 2004 Ford F150

1 Answer

I have a ford fiesta 2008 model ive typed in the incorrect radio code and now the radio is locked please advise on how to unlock the radio and enter the correct code


you have to keep the ignition on for two or more hours and it will then give you another three tries. the ignition must stay on all that time uninterrupted.

Mar 06, 2013 | Cars & Trucks

1 Answer

2003 GMC SIERRA 1500 HD I can enable the keyless entry remote but after three or four uses the system stops responding. changed the battery and checked fuses the locks still work with the inside switches...


  • 1 Put the vehicle in park, and turn the ignition to "On/Run" (don't crank the engine).

  • 2 Press the odometer trip stem on your instrument panel until it displays the message "Relearn Remote Key." Then release the stem.
  • 3 Press and hold the odometer trip stem again for three seconds. You will see the message "Remote Key Learning Active."

  • 4 Press both "Lock" and "Unlock" on your key fob at the same time, and hold the buttons down until a chime sounds. This should take about 15 seconds.
  • 5 Repeat Step 4 for each additional key fob you wish to program.
  • 6 Turn the ignition to "Lock/Off."

  • Ford F150 Body Kits






  • Jun 07, 2012 | Cars & Trucks

    1 Answer

    2011 ford fiesta diesel. I removed the radio fuse from my car and although the radio switches on it won't go past the initial start up screen and doesn't ask for the radio code. Please can you...


    Find the person who bought this car new, take that person and the car to a Ford dealer. They will fix it for free, it is under warranty. Now that you know you have no business monkeying around with anything except the ignition key, the pedals, and the steering wheel, stay away from other things on the car.

    Jun 20, 2011 | 2011 Ford Fiesta

    1 Answer

    Just bought a x reg ford puma but the key fob does not work, bought a new battery and fitted it, needs re-programming but don't know how to do it.


    Telephone: Fax: VAT Registration No.:
    Infrared remote control
    NOTE: Infrared emitter can be seen at front edge of key.
    System operation
    Switch ignition ON. Ensure clock LED illuminates for 3-5 seconds. Pressing key lock button once activates central locking and alarm. Pressing key lock button twice within 3 seconds activates double locking system.
    Programming
    When
    Key batteries completely discharged. Key batteries not replaced within 15 seconds. Key added or replaced. System malfunction.
    How
    Obtain all keys fitted with remote control. Turn ignition switch to position I. Wait approximately 10 seconds. Ensure clock LED illuminates.
    NOTE: LED illuminates for approximately 5 seconds.
    Switch ignition OFF and remove key, while LED illuminated. Programming mode activated for approximately 20 seconds (LED illuminated). Proceed as follows: Point key at receiver (located near interior lamp). Press and hold unlock button Fig. 1 [1]. After approximately 1 second key LED will flash once [3]. Press lock button 3 times Fig. 1 [2]. Release unlock button Fig. 1 [1]. Continue to point key at receiver until LEDs in clock and key have flashed 5 times. Ensure LED remains illuminated. Repeat above procedure within 20 seconds to program remaining keys. To exit programming mode and extinguish clock LED: Switch ignition ON and OFF. Wait approximately 20 seconds.
    NOTE: A maximum of 4 keys can be programmed. Fig. 1
    Radio frequency remote control
    System operation
    Switch ignition ON. Ensure clock LED illuminates for 3-5 seconds.


    Pressing tailgate release button twice within 3 seconds unlocks the tailgate - if fitted. Pressing key lock button once activates central locking and alarm. Pressing key lock button twice within 3 seconds activates double locking system. Interior lamp illuminates when disarming system.
    Programming
    When
    Key added or replaced. System malfunction.
    How
    Obtain all keys fitted with remote control. Fasten seat belts and close all doors. From position I, turn ignition switch as follows: To position II. To position I. To position II. To position I. To position II. To position I. Programming mode activated for approximately 20 seconds. LED or fog lamps ON warning lamp illuminates (some models) or the system will emit an acoustic signal to indicate start of programming mode. Proceed as follows: Type 1: Press and hold unlock button Fig. 1 [1]. Type 2: Press unlock button Fig. 2 [2]. Ensure clock LED or fog lamps ON warning lamp flashes (some models) or wait for acoustic signal (indicates correct programming). Wait 2 seconds. Repeat above procedure within 20 seconds to program remaining keys. To exit programming mode: Switch ignition ON. Wait 20 seconds.
    NOTE: A maximum of 4 keys can be programmed.

    Aug 25, 2010 | Ford Focus Cars & Trucks

    1 Answer

    I have just changed the batteries in my key fob for my P reg. ford fiesta but it won't open the doors


    Programming
    When
    Key batteries completely discharged. Key batteries not replaced within 15 seconds. Key added or replaced. System malfunction.
    How
    Obtain all keys fitted with remote control. Turn ignition switch to position I. Wait approximately 10 seconds. Ensure clock LED illuminates.
    NOTE: LED illuminates for approximately 5 seconds.
    Switch ignition OFF and remove key, while LED illuminated. Programming mode activated for approximately 20 seconds (LED illuminated). Proceed as follows: Point key at receiver (located near interior lamp). Press and hold unlock button Fig. 1 [1]. After approximately 1 second key LED will flash once [3]. Press lock button 3-5 times Fig. 1 [2]. Release unlock button Fig. 1 [1]. Continue to point key at receiver until LEDs in clock and key have flashed 5 times. Repeat above procedure within 20 seconds to program remaining keys. To exit programming mode and extinguish clock LED: Switch ignition ON and OFF. Wait approximately 20 seconds

    Jan 16, 2010 | 1995 Ford Escort

    1 Answer

    My remote control no longer opens the doors even though the batteries have been renewed


    Insert the ignition key and turn from position II (Ignition) to position 0 (off)
    and back four times within three seconds. Remove the ignition key.
    The locking control system is now in "learn mode" for the next 20 seconds the
    red warning system LED stays on continuously to indicate this.
    During the 20 seconds press one of the transmitter buttons. The remotes signal and
    code number is learned by the locking module and is indicated by flashing the
    warning system LED.
    Wait until learn mode times out (20 seconds) or switch the ignition back to ON.

    Jan 02, 2010 | 2000 Ford Focus

    3 Answers

    04' Ford FreeStar - The Radio Stay On When Van Is Off


    Nothing wrong with it. When you remove the key, it stays on for about 20 minutes. It gives you time to finish listening to your radio and roll up the window. Once the driver door is open, everything shuts off or if 20 minutes has passed. 
     
     

    Mar 28, 2009 | 2004 Ford Freestar

    3 Answers

    Focus remote key fob not working


    this info would cost you £30.+ at ford Radio Frequency Programming Instructions:
    • Insert the ignition key and turn from position II (Ignition) to position 0 (All off) and back four times within three seconds.
    • Remove the ignition key. The locking control system is now in "learn mode" for the next 20 seconds and the red warning system LED (By the clock) stays on continuously to indicate this.
    • During the 20 seconds press one of the transmitter buttons. The remotes signal and code number is learned by the locking module and is indicated by flashing the warning system LED.
    • Wait until learn mode times out (20 seconds) or switch the ignition back to ON.nfrared Programming Instructions:
    • Put your key into the ignition and turn to position 1 (Radio). After approximately 10 seconds the red alarm control LED (next to the clock) should illuminate. As soon as it comes on remove the key from the ignition - the LED should remain lit.
    • Point the remote's "eye" at one of the front door sensors and press the rear button until the light on the transmitter illuminates (Keep the button pressed)
    • With the rear button held in press the front button 4 times then release both at the same time. The control lights in both clock and fob will flash 4 times to indicate programming complete.
    • Turn the ignition back on to exit programming mode

    Nov 28, 2008 | 2000 Ford Focus

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    51 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75807 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...