Question about Cars & Trucks
Ford 1998-2005 CD Cassette player radio Premium sound TESTED P013f Manufacturer: Ford SKU: 638-P013f ISBN: kigma its out of the car all I have is the stereo and a 12 volt power supply please somebody teach me the connection to be done to get it to work thank you guys for whatever favor extended more power
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
things to consider:
Does it have a factory amplifier?
Is the factory harness still present?
Does it still have the speakers present?
You are going to only have a certain amount of wires... If the factory harness is still there you can simply purchase an aftermarket or just look at one in a local store on what wires are what.
you would have your:
gray and gray w/ black
purple and purple w/ black
green and green w/ black
white and white w/ black
these are normally used as an after market clip on harness for that factory wiring. (left front, right front, left rear, right rear)
Obviously your going to have the constant (yellow), ignition (red) and the ground (Black);
so the others would be either a remote (amp or power antenna) usually white with blue strip and dimmer normally orange for the after market harness, and the others will be the speakers.
What you COULD try is using a 9v battery and picking up the wires that are solid and striped and touching them to the 9v battery.
When you find the two that make that speaker make a popping sound you have found that speaker.
Once you have found the speaker that pops, you should be able to take it out and look at the color of the wires to make sure you will have the pos and neg for each speaker correctly set.
You dont want some speakers being in phase while other are out of phase. if so the sound wont be right.
Posted on Mar 27, 2009
SOURCE: cd cassette player
I pulled the radio out of my 2003 ford explorer and when I replaced it it willnot play. The lights come on ,all the controls seem to work , but no sound at all.
Posted on Apr 10, 2009
here is the radio's wire color diagram, u should be able to fix the problem with this info.Fuse box is on drivers side under the dash.
1991 Ford Tempo Car Radio Wiring Guide
Car Radio Battery Constant 12v+ Wire: Green/Yellow
Car Radio Accessory Switched 12v+ Wire: Yellow/Black
Car Radio Ground Wire: Red or Black
Car Radio Illumination Wire: N/A
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: 6 1/2′
Car Audio Front Speakers Location: Doors
Left Front Speaker Positive Wire (+): Orange/Green
Left Front Speaker Negative Wire (-): Black/White
Right Front Speaker Positive Wire (+): White/Green
Right Front Speaker Negative Wire (-): Black/White
Car Audio Rear Speakers Size: 5′ x 7′
Car Audio Rear Speakers Location: Rear Deck
Left Rear Speaker Positive Wire (+): Pink/Green
Left Rear Speaker Negative Wire (-): Pink/Blue
Right Rear Speaker Positive Wire (+): Pink/Blue
Right Rear Speaker Negative Wire (-): Green/Orange
Posted on Apr 12, 2009
Tips for a great answer:
Oct 10, 2012 | 2003 Ford Windstar
Oct 10, 2011 | 1996 Ford Ranger SuperCab
Nov 18, 2009 | 2006 Ford Explorer
May 22, 2009 | 2000 Ford Focus
Aug 22, 2008 | 1990 Ford Taurus
Aug 02, 2008 | 2002 Ford Ranger Regular Cab
89 people viewed this question
Usually answered in minutes!