Question about 2001 Toyota RAV4

Open Question

Have a 2002 toyota rav 4 code b2796 no security system does not look like a trans key very thin

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: toyota rav 4

I work for Toyota, and I will be glad to provide you with the actual answer:

The RAV/4 product is available in two models, a 4WD model and a 2WD model.
The difference between the two is on the 2WD model, there is no driveshaft going under the vehicle to the rear wheels, and no rear differential. There is no "RAV/2"; both models are called RAV/4's.

There is a lot of common confusuion about how the 4WD works. It is full time 4WD. In other words, it is always in 4WD. It does not "kick in/kick out/automatically engage", or anything like that. It is 4WD all of the time. But, when I say "4WD", that is sometimes mistaken for "all wheel drive", and, in this case, the RAV/4 is not "AWD". What this means is that if you raise the RAV/4 up on a lift, and put it in gear, 1 rear and the other side front tires will spin. True "all wheel drive" would have ALL 4 wheels spinning. This is not the case with the Rav/4. What the RAV does have, making up for not having "True AWD" on the 5 speed model, however, is a switch that locks the center differential in the transfer case, which, when engaged, applies a method of "locking" the 4WD system for maximum traction, but it is still not AWD. The automatic version doe not have this ability.
The last "true AWD" vehicle for purchase was a 1970's International Scout.
If you are considering purchasing a RAV/4, that is a very good investement. They hold their value quite well, and are virtually bulletproof; I do not make any "money" off my RAV/4 customers...
Just "gas station work". Very nice cars. I hope that this helps you, please feel free to comment back with any otherr questions...Glad to be of assistance.
Toyota Ed


Posted on Oct 17, 2008

  • 65 Answers

SOURCE: toyota rav 4

I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram

Posted on Nov 30, 2008

  • 1861 Answers

SOURCE: ecu locate in 1998 rav 4?

Under the glovebox, passenger side.

Posted on Dec 30, 2008

frcs68
  • 1605 Answers

SOURCE: Repair Codes - B2796, P0750 and P0420.

B2796 is no communication in Immobiliser system, which means you or some one else try to use a key transponder to start the car.
you need some one to clear that code. it doen't affect the car performance.
P0750 is shift Solenoid malfunction, you hsould have engine management light on the dash. this you can call the dealer, I believe this is cover by Toyota service bulletin.
http://www.mediafire.com/?jjmootmytfz
P0420 is O2 oxygen sensors.Toyota has issued a service bulletin regarding the P0420 trouble code that could apply to your vehicle, to be sure if this bulletin applies to your car I will need the VIN# and e-mail to tedrttr@yahoo.com with that information.

Posted on May 19, 2009

MNfisherman
  • 11896 Answers

SOURCE: Check engine light came on my 2002 Rav 4. Auto

Chances are, it's going to be either 1 of the 3 switches that need replacing, a new gas cap or a new charcoal canister. The 2 switches under the hood are the VSV for CCV and VSV for EVAP. The one at the canister itself is the VSV for VSP. This VSV for VSP typically goes bad before the other 2 switches do. Plus, the switches are much cheaper than a new canister. (BTW, VSV stands for vehicle switching valve.)

PO446 is an evap canister code

Posted on Oct 28, 2009

Testimonial: "Very good- a little too complex for me to fix unless a part can be replaced. Can the repair be simplified?"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove the ignition cylinder on my 2002 Toyota Rav 4 without the key?


from another post, psoted by James Allmond

How to remove ignition cylinder from Toyota Camry 1993

Here are step-by-step instructions for the removal and re-installation of your ignition cylinder on your Toyota. Hope this sheds some light on the subject and solves your problem. Have a great day!




  1. Disconnect the negative battery cable. If equipped with an air bag, wait at least 90 seconds before working on the vehicle.
CAUTIONSome models covered by this guidemay be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS, as described in .
  1. Remove the lower steering column cover. Unfasten the ignition switch connector under the instrument panel.
  2. Remove the screws which secure the upper and lower halves of the steering column cover.
  3. Turn the lock cylinder to the ACC position with the ignition key.
  4. Push the lock cylinder stop in with a small, round object (cotter pin, punch, etc.).
On some vehicles, it may be necessary to remove the steering wheel and combination switch first.
  1. Withdraw the lock cylinder from the lock housing while depressing the stop tab.
  2. To remove the ignition switch, unfasten its securing screws and withdraw the switch from the lock housing.
To install:
  1. Align the locking cam with the hole in the ignition switch and insert the switch into the lock housing.
  2. Secure the switch with its screw(s).
  3. Make sure both the lock cylinder and column lock are in the ACC position. Slide the cylinder into the lock housing until the stop tab engages the hole in the lock.
  4. Install the steering column covers.
  5. Connect the ignition switch wiring.
  6. Connect the negative battery cable.

source

How do remove the ignition cylinder on my 2002 Toyota Rav 4 without the key

Jul 28, 2016 | Toyota Cars & Trucks

1 Answer

Car alarm keeps going off when i remove the key from the ignition rav 4 2002


why not get it fixed.
the security system is faulting
so get it fixed.
or if DIY person, get the FSM read that section
or google for 1hr on your car,
did you read this?

http://justgivemethedamnmanual.com/toyota/toyota-rav4-owners-manual/

have you tried both FOB's one in car at a time.?
after all , one might be stuck in PANIC mode (bad switch)
car came with 2 FOBS, ever have just 1, or bad things happen.
did you read page 184?

Feb 04, 2014 | Toyota RAV4 Cars & Trucks

1 Answer

I have a 2007 rav 4 the engine light will flash and the rav feels rough the engine or trans won't shift then it stops and works fine


The flashing check engine light means there is a serious problem with the performance of the engine. You need to get the computer scanned for trouble codes next.

Dec 06, 2012 | Toyota RAV4 Cars & Trucks

1 Answer

Code b2796 however no immobilizer in vehicle


Hello! Know for sure that you already fixed or burned your car lol... i had the same issue and resolved with an stupidity. There is a fuse that the car might or might not need depending if it does have an inmobilizer or not. Mine did not have it therefore the fuse was not needed. Once I removed it issue was fixed.
11_1_2015_2_38_27_pm.png

Oct 03, 2012 | 2001 Toyota RAV4

3 Answers

My rav 4 2002 d4 engine does not idle, what could


mon rav 4 2002 moteur D4 ne tourne pas au ralenti, ce qui pourrait

Jul 02, 2011 | 2002 Toyota RAV4

1 Answer

My rav 4 2003 model ignition key shell was


Strip the plastic off the head of the key. The key code should be under that part stamped into the metal keys head

Apr 15, 2010 | 2003 Toyota RAV4

1 Answer

2004 rav 4 trans in park and engine will not rev out like now power at all . if you try to drive you will have to feather the gas to go 5 miles an hr


is the check engine light on? check for engine fault code
the front oxygen sensor could be bad
it's called air/fuel mixture sensor

Mar 06, 2010 | 2002 Toyota RAV4

1 Answer

Will not start, has a B2796 security code. this is a 2000 toyota landcruiser. we have plenty of fuel pressure but do not seem to be getting spark. ignition key is pretty worn and hard to turn sometimes


That code corresponds with the ignition not being able to recognize that you are using the right key. It thinks you're trying to use the wrong key. You'll need a new key made.

Jun 24, 2009 | 2001 Toyota Land Cruiser

1 Answer

Repair Codes - B2796, P0750 and P0420.


B2796 is no communication in Immobiliser system, which means you or some one else try to use a key transponder to start the car.
you need some one to clear that code. it doen't affect the car performance.
P0750 is shift Solenoid malfunction, you hsould have engine management light on the dash. this you can call the dealer, I believe this is cover by Toyota service bulletin.
http://www.mediafire.com/?jjmootmytfz
P0420 is O2 oxygen sensors.Toyota has issued a service bulletin regarding the P0420 trouble code that could apply to your vehicle, to be sure if this bulletin applies to your car I will need the VIN# and e-mail to tedrttr@yahoo.com with that information.

May 19, 2009 | 2002 Toyota Camry

Not finding what you are looking for?
2001 Toyota RAV4 Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...