Question about 1989 Ford Probe

4 Answers

Where is the PCV valve on a 89 Ford Probe? - 1989 Ford Probe

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Its right at the Top on the Valve cover you will see a Black hose that runs from the valve cover to the Intake Plenum the PCV valve will be on the Valve cover side its a little plastic thingy that is connected to the Hose that slips into the hole to the valve cover its a 1 min fix providing you have the PCV valve :))

Posted on Sep 25, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

The pcv valve is located at the rear of the valve cover. connected to a rubber line, going to the intake manifold. it pulls right out by hand. no tools or needed.

Posted on Mar 05, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 106 Answers

It will be connected to a rubber hose going into the same place you put your oil in.. if not on that side then it will be on the other..
good luck ray

Posted on Jan 19, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Throttle seems stuck on a 1995 ford probe as when engine is started it races with no control


This sounds like a major vaccum leak or a stuck IAC(idle air control) motor.Look for a loose/broken vacuum line(a large hose feeds the brake booster and the PCV valve).(my stepson's Sable had a rotten vacuum elbow).

May 04, 2012 | 1995 Ford Probe

1 Answer

I have a 89 F150 how can I cause my transmission to shift fasterit seems very slow ,and where is the PCV located on this engine V6 -4.9, thx


PCV valves on engines that old will be found plugged into a valve cover. looks like a thumb sized item with a vacuum hose attached to the top. do yourself a favor and get a new piece of hose and a new grommet which fits into the valve cover. PCV valves are simple little critters, can be cleaned by a good soak in gasoline, and problems with them usually relate to vacuum leaks at each end.

for the ****** use some magic fluid like marvel or lucas found at parts stores, along with a fluid and filter change. you are not going to do any real maintenance or repair on a ****** that old. you just rebuild it.

Sep 07, 2011 | 1989 Ford F 150

1 Answer

89 ford v-8 e-350 fleetwood blue smoke coming out the exhaust what would problem be?


blue smoke is usually caused by oil getting into the cylinder combustion area, either past rings, valve seals, or valve guides, all being expensive to fix-first though, check the PCV system for leaks or a plugged PCV.

Jun 16, 2011 | 2002 Ford E350

1 Answer

I need two new doors the door locks and handels are broken and someone stole the interior door panel


have you tried to go to a junk yard or to a ford probe forum? I had a 89 Ford Probe GT and had the same issues.

Dec 22, 2010 | 1993 Ford Probe

1 Answer

Sounds like lifter or valve tick. It's a friends car and he recently had the head done. The car is a 89' ford probe 2.7 Liter sohc


Chek oil, and if it seems to thick, put a can of ehgine flush it the oil fill, then run for a minute to five minutes, then drain oil and go with a 20wght oil. If the lifer still knocks or ticks, replace lifter.

Aug 11, 2009 | 1995 Ford Probe

1 Answer

Pcv valve location on a 89 camry


There is not a PCV valve on the 4cyl. 6 cyl. is located under hood, center, upper engine area, mounted in rear valve cover Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Jun 05, 2009 | 1989 Toyota Camry

1 Answer

Ford probe stalls


You should do a full tune up. Replace your Spark Plugs and Wires, PCV Valve, Air Filter, and Coils if needed.

Also you should do an oil change on it if it sat for a while.

Please let me know if your problem presists.
Thanks, Charlie

Jan 29, 2009 | 1993 Ford Probe

1 Answer

89 probe


low end pipe is your drain pipe

Jul 19, 2008 | 1989 Ford Probe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...