Question about Scion xA

Open Question



Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


SOURCE: low beam headlights do not work, but high beam headlights do


I've been troubleshooting this same problem on a different vehicle this week, and I can give you the steps I'd take.

1. If both sides went out at the same time, the problem is *NOT* likely to be the bulbs.

2. Check the fuses to see if both low beam lights are on the same fuse. Many cars have one fuse for low beam and another for high beam, so both lights out at the same time typically means fuse blown.

3. If the headlights are OK and the fuses are OK, then the problem is *LIKELY* the headlight switch. In my case, AutoZone has one and it can be installed easily; but in your case, that may not be as simple.

Please post your findings or comments.

Posted on Jul 16, 2008

  • 54 Answers

SOURCE: headlights wont turn on but high beams do on my camry

Have you tried new bulbs, its rare but both low beams may have blown at the same time, it has happened to me in the past.
I don't know your car but the high and low beams could be fused separately so you are left with at least one set in an emergency.

Posted on Jul 02, 2009

  • 1986 Answers

SOURCE: Both low beam headlights stopped working at the

Could be the relay for the lowbeams is faulty, if your DRL's are your lowbeams, then your DRL Unit could be bad. Also did you blow a fuse cuz a random surge could blow the fuse

Posted on Aug 12, 2009

  • 2 Answers

SOURCE: High beams won't turn off

  • The problem is a faulty dimmer switch. Here are step by step instructions for fixing it. (Try it - it's easy and way cheaper than having a mechanic fix it).
  • The Ford Focus high-beams (won't shut off) problem is very common in 2000-'05 models. So common, in fact, there should have been a recall, but there wasn't. Luckily, it is also VERY easy to fix. This was the first time I ever fixed anything other than a bulb on my car and it took me less than 30 minutes. Here's how:
  • First, buy the part. The "dimmer switch" is the lever to the left of your steering wheel that controls high/low-beams and the turn signals. You can get it at Pep Boys, Standard Autoparts, or a similar store for about $45.
  • Now, to install the part: Make sure the car is off as are the lights, radio, etc. First, disconnect the clamp connecting the negative side of your battery to the car. To do this, look under the hood and take the plastic cover off the battery. Use a socket wrench to loosen the nut that is holding the clamp to the negative part of the battery (in my '04 Focus, the negative side is on the right when you are facing the battery from the front side of the car). Once the clamp is loosened, yank the clamp upward until it disconnects (this might take a little elbow grease).
  • Now, go back to the driver's seat. You are going to take the following steps to remove the switch and replace it with your new switch: First, notice the tabs on the left and right of the steering column. Use a flat-head screwdriver to push them in and release the top cover of the steering column. The cover won't come off the dash, but now you can open it up to see inside the steering column. You will see the switch you are going to replace. Press the tab (on the back end of the switch) to release it. (You will hear a "click" and the switch will adjust upward once you press the tab). NOTE: You may need a screwdriver to help you work in the steering column, unless you have small hands. Now, slide the switch up from where it is held, but be mindful that it is still connected (by wires) to the interior of the column. The next part was the toughest for me, but it really is very simple. You need to remove the grey plug from the switch. It took me some pressing with the screwdriver and really working the angles, but in the end I think it was sheer brute force that got it disconnected. Now the switch is out (and you feel awesome - even with bloody knuckles).
  • All that is left is to put the new switch in ... and that's REALLY easy. Connect the new switch to the grey plug that you just disconnected from the old switch. Mindfully slide the new switch into the spot where the old switch sat. Push it in so you hear that same "click" when the tab you had pressed to release the old part now secures the new part into place. Once it's in, you are all set. All that is left to do is put the steering column cover back in place and reconnect the battery.
  • Now, isn't that better than blinding everyone on the other side of the road?
  • If this helped you, let me know.
  • Posted on Feb 05, 2010

    • 1 Answer

    SOURCE: 2006 grand prix low beam headlight do not work,

    I'm having the same issue. I have changed the bulbs and fuses. I can't find a relay but I don't think that is the issue. Some other people have suggest the Dimmer Control Switch. I am working on that. Please let me know what you find out.

    Posted on Feb 08, 2010

    Add Your Answer

    Uploading: 0%


    Complete. Click "Add" to insert your video. Add



    Related Questions:

    1 Answer

    Turned on headlights car went dead

    When you turn on the head lights the current draw exceeded the capacity of the alternator and battery and left nothing for the ignition system. Have a load test done on the battery . check the tension and condition of the alternator drive belt.

    Apr 21, 2013 | 2006 Scion xA

    1 Answer

    Changed the battery in a scion xa and the alarm keeps going off when the battery is connected back

    Scion XA PDF Manuals online Download Links at Scion ...
    Here at Scion XA PDF Manuals online Download Links page,intended to offer Scion XA Owners available Electrical ... Scion XA 2004,2005,2006,2007,2008:

    How To Replace Scion XA Key Fob Battery 2004 - 2006 ...

    ? 1:45
    Aug 4, 2014 - Uploaded by Keyless Entry Remote Inc
    This video will show you how to replace a key fob battery for a 2004 2005 & 2006 Scion XA.

    Jan 21, 2013 | 2005 Scion xA

    1 Answer

    2006 Hyundai Tycson GL Headlight Problems

    Could be a defective headlight relay, Located in the fuse block in engine compartment,

    Nov 29, 2012 | Cars & Trucks

    1 Answer

    Scion tc brights indicator wont come on.

    i did this and found that the fuse for the lights were blown look in your manual to see where the fuse is and replace it

    Aug 21, 2012 | 2006 Scion tC

    1 Answer

    Low beam on right side of 2006 dodge ram 1500 doesn't work

    the high beams work fine and power goes to the only when vehicle is on when it is off no power gets to the low beam side of the right headlight. ????????

    Feb 20, 2018 | 2006 Dodge Ram 1500

    1 Answer

    2005 Scion xA Headlights wont turn off

    make sure the switch is off

    Nov 12, 2011 | 2005 Scion xA

    1 Answer

    2007 buick allure headlights will not turn on parking lights work,high beams work. no low beams or daytime running lights

    As you described the problem the solution is to replace the headlight bulbs, they have two elements one for normal lighting or low beam and one for high beams. the elements for the low beams are continuously used and are subject to burn sooner.

    Feb 15, 2010 | 2006 Buick Lucerne

    1 Answer

    2006 Toyota Camry....headlights will not come on;

    there was a recall on the headlight switch up to 06 camrys,find out if your car is affected by calling Toyota with the chassis no,and month of build

    Nov 01, 2009 | 2001 Toyota 4Runner

    1 Answer

    My headlights wont turn on yet my low and high beams are working

    Please give more info. How do you know that your low and high beams are working if your headlights wont turn on?

    Aug 10, 2009 | 2006 Honda Accord

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    433 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Scion Experts


    Level 3 Expert

    79847 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    Brad Brown

    Level 3 Expert

    17151 Answers

    Are you a Scion Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides