Question about Mitsubishi Passenger

Open Question

Shogun 3.2 did idle problem

The car is automatic and cuts out when it is in gear standing in traffic.

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76848 Answers

SOURCE: car cutting out when idleing

Here is the most common cause of surges and stalls at stops and low erratic idle speed and rough idle, it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Posted on Mar 18, 2009

Ad
  • 490 Answers

SOURCE: car cuts off when idling at traffic lights when

your engine idle not keeping up with the demand when you have the air on.Either have you engine properly tuned up,or turn up the throttle idle to about 750/850 RPM or a little higher if needed.Keep in mind if you have to go through this you need something fixed to make the engine run properly with the A/C on.

Posted on Jul 23, 2009

  • 13 Answers

SOURCE: Car runs well but cuts out when stuck in traffic? 2001 jag stype

fuel filter

Posted on Sep 21, 2009

  • 784 Answers

SOURCE: (1)Car overheating (2)Car starting and cutting out

1- There are 2 fan systems in your car. One is a fan clutch. the other is electric fan. The electric fan is still working, but the fan clutch is not. Replace the fan clutch will take care of this problem. 2- When you put flat down on accelerator the car starts since at this position the throttle body open all the way making a correct air: fuel ratio of 14.6 :1. When you release the accelerator,the throttle body has to go back to it preset position and at this position it didn't make a correct air: fuel ratio of 14.6 causing the engine die instantly. This means your throttle body needs cleaned. There is a vacuum thermal valve at the top engine block to answer your question. It can be easily identified by looking at 2 vacuum hoses from this valve running down to the throttle body.

Posted on Nov 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a vw polo 2002,when stuck in traffic or after long drive,the ar goes off


does the temp gauge reach the red area? check eng coolant .Over heating could cause eng to cut out so as not to cause more damage check the cooling system.When travelling slowly or at stand still turn heater to max heat and max speed this will cool eng but is only a temporary solution

Mar 26, 2014 | 2002 Volkswagen GTI

1 Answer

Shogun warrior


Check your connections at the shifter and neutral safety switch. If you wiggle the shifter and it starts, the problem is close to the base of the shifter or the wiring harness to the transmission from the shifter. Look for loose connections or damaged wiring.

Mar 18, 2014 | 2006 Mitsubishi Montero

1 Answer

How do i top up the atf on my shogun sport auto


change the ATF spacific type and clean the straner and change the filter

Jan 20, 2014 | Mitsubishi Cars & Trucks

1 Answer

Dodge durango Engine cut's off


Try replacing the fuel filter.

Jun 12, 2009 | 2000 Dodge Durango

1 Answer

Honda accord 2003 car disengage the automatic gear at zero speed


Is there an engine light?

Assuming there are no engine codes set

1. Do the idle learn procedure
2. Check fuel pressure (380 to 430 KPa)
3. Check idle speed (740 to 840RPM in P or N)
4. Check the brake pedal position switch (requires a scan tool)

If these all check out, look for air intake leaks, faulty harness and sensor connections.

As you can see, these steps should probably be done at a dealer.

May 21, 2009 | 2003 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,001 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...