Question about Nissan Cars & Trucks

Open Question

Nissan Versa Lock out

After manually unlocking the driver's door and getting out with the engine running and closing the driver door, I was locked out of the vehicle. Is this a common problem?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 61 Answers

SOURCE: Power door locks won't work

You need to have someone or yoursef check the body control module with a compatible scan tool. Thats where the problem you are having resides. It may need a software update or replacement. You can also disconnect the battery for a few minutes, that will cause the BCM to reset and may fix it.

Posted on Jan 28, 2009

  • 1348 Answers

SOURCE: nissan presage central locking

make sure the trunk is locked and the ignition is off.
the altima will not lock if the key is in the ignition.
it may think there is a key in the ignition because the switch is bad.

Posted on May 23, 2009

jmgldsmth
  • 1869 Answers

SOURCE: 2004 Camry front driver door lock will only lock/unlock with key

Remove the door panel and reconnect the plug going to the front driver door lock or, if you can hear the motor trying to engage the door lock cam when you press the lock/unlock remotereconnect the door lock lever bar

Posted on Jun 09, 2009

s_s_m_o_k_i_
  • 162 Answers

SOURCE: 2003 Nissan Murano Driver door won't lock or unlock with keyfob

about 14 bux at this link
http://www.autopartswarehouse.com/search/?N=5716+776&Nr=AND(wpn_tl_name:Auto+Body+Parts+%26+Mirrors,wpn_scat_name:Door+Lock,wpn_cat_name:Doors+%26+Components)&refType=Brand&refValue=Replacement

Posted on Jul 31, 2009

  • 1 Answer

SOURCE: My nissan murano back door won't open?

were you able to get this resolved ? if yes, can you please share the solution..i too have the same problem with my 2003 Murano.

Posted on Feb 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock Child lock on nissan if the lock is on and dont open from outside


All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h).
? All doors unlock automatically when the ignition is placed in the OFF position.
The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure: 1. Close all doors.
2. Place the ignition switch in the ON position.
Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNLOCK) for more
than 5 seconds.
4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
5. The ignition switch must be placed in the OFF and ON position again between each setting change.
When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver's or front passenger's side).
NOTE:
The automatic door unlock function can be changed using the Vehicle Settings in the vehicle information

Sep 30, 2016 | Nissan Pathfinder Cars & Trucks

1 Answer

Can the immobilizer or central locking be switched off in a Nissan Almeria 2001 car?


you can remove the central locking fuse , this will stop the lock/unlock constantly , the problem is usually with the drivers door lock mechanism , that is perhaps why you cant lock/unlock with the key, lock from inside vehicle and get out passenger side, that lock should work with the key until you get the lock changed on drivers door

Jun 11, 2015 | Nissan Almera Cars & Trucks

1 Answer

Nissan versa hatchback trunk lock won't unlock


Typical failure with the Nissan Versa,You need to find a auto electrician that is willing to go to the passenger side where the lock and unlock for the trunk module is located and and jump the wire together,This solves the problem forever, other than that the module needs to be replaced and yes you better make it a hobby it always fails

Jan 27, 2013 | Cars & Trucks

2 Answers

Door locks in 2005 ford focus keep clicking like someone keeps pushing the lock switch


change the drivers side door lock mechanism ,its a complete unit full of fancy electronics

Dec 15, 2011 | 2005 Ford Focus

1 Answer

Locked via keyless with engine running


Most newer cars have a safety feature that locks the door when the ignition is turned on or the car is put in gear. This can sometimes be a problem, as you found out, if the keys are left in the ignition in the on position and you get out of the car shutting the door sometimes this safety feature kicks in and locks the door on you with the keys in the car. I understand this was a mistake on your part, thinking you did take the keys, but if you ever just stop with the car running and jump out to run in the house, roll down the window enough to get your arm in to unlock the door.

May 29, 2009 | 2009 Nissan Versa

1 Answer

Keyless door lock will not work


I Suggest a new battery in the remot if that is what you mean by keyless.. If it is a 10 key entry psd, it will need dealer assidtance. sorry

May 27, 2009 | 2008 Nissan Versa

1 Answer

04 GMC Canyon remote locking died. Batt replaced on remote..


It sounds like your key fobs need to be reprogrammed. There are two ways to do that. The first way is to go to the dealership and let them do. The second way is to manually do it. This should work. Get inside the truck and close the door. Apply the parking brake and cycle the key on and off four times. If it enters the program mode either the horn will sound or the door will lock and unlock or vise versa. Press and hold both the lock and unlock buttons at the same time. If the key fob reprograms, the locks will lock and unlock or vise versa. Turn the key off and try to lock and unlock the truck with the key fob. If it works then your good to go. I hope this is helpful.

Jan 03, 2009 | 2004 GMC Canyon

2 Answers

Nissan Murano 2005 SL keyless entry remote programing, got a used remote, how can I program it?


Close all vehicle doors, LOCK doors using drivers side switch.

Insert key all the way into the ignition, (do not turn) remove key.

Repeat this step 5 times. (6 total)

Hazards should flash to indicate program mode.

Press any button on transmitter to be programmed, hazards should flash to indicate successfull program.

*For additional remotes, cycle drivers door lock UNLOCK, LOCK, press any button on remote, hazards should flash. Repeat step as necessary.

Ignition ON, (engine off) ignition OFF, UNLOCK using drivers side switch, test remotes.

Source

Aug 06, 2008 | 2005 Nissan Murano

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...