Question about Chevrolet Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: oxygen sensor
They are all located on you exhaust system. Start from you exhaust manifold and follow the pipes down to the tail pipes . You will see the sensors (4) they are screwed into exhaust pipes and they have wire connections on them (Kinda Looks Like a spark Plug) they wires are unusually colored in white black and grey. Good Luck contact if you need more information
Posted on Dec 28, 2008
Need a 7/8 open end wrench or a o2 sensor socket. Located in exhaust pipe. The one closest to the engine is Bank 1 Sensor 1. The ones located downstream and known as "Sensor 2"
Posted on Jan 06, 2010
There is a special socket for O2 sensors which allow the wires to stick out and not get twisted up. It's not expensive and available at most auto parts stores. Disconnect the sensor from the wiring harness, with the plug and then use the socket to remove and replace the new sensor. Re-connect electrical plug.
Please rate this answer. Thank you.
Posted on Apr 08, 2010
Tips for a great answer:
Jul 08, 2017 | Cars & Trucks
Nov 22, 2016 | 2011 Chevrolet HHR
Jan 25, 2016 | 2008 Chevrolet Chevrolet HHR LT
Jul 23, 2014 | Chevrolet Chevy Cars & Trucks
Jun 21, 2014 | 2009 Chevrolet HHR
Jun 17, 2013 | Cars & Trucks
Dec 03, 2012 | 2006 Chevrolet HHR
Aug 02, 2011 | 2006 Chevrolet HHR
Jan 20, 2010 | 2006 Chevrolet HHR
50 people viewed this question
Usually answered in minutes!