Question about 2008 Saturn Sky

Open Question

REMOVE DOOR PANEL FROM 2008 SATURN SKY

Need to remove interior door panel to replace passenger side outer door handle

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: How do I take off the driver side door panel off of a 2000 saturn

Depends on the problem. If it's electronic and the window won't work, let the garage handle it. Make sure the handle is put back on securely. I had to take mine back for them to put it on right.

Posted on Mar 31, 2009

mcgyver468
  • 710 Answers

SOURCE: Saturn SW1 (97) outside RR door handle wont work,

YOU SHOULDN'T SEE THE INTERIOR ROD MOVE BECAUSE THE OUTSIDE HANDLE HAS IT'S OWN ROD THAT CONNECTS TO THE DOOR RELEASE THAT IS REALLY SHORT. IT MOVES DOWN WHEN THE HANDLE IS PULLED UP. TAKE OFF THE THREE SCREWS THAT HOLD THE DOOR CATCH ON THE DOOR AND YOU WILL SEE THIS SMALL ROD. I HOPE THIS HELPS YOU. LET ME KNOW. GOOD LUCK

Posted on May 03, 2009

Chiefnadc
  • 71 Answers

SOURCE: How do I remove mt right front door panel and

A saturn is not like other cars you have to remove the outside door panel to get inside the door it has screws holding it on

Posted on Jun 24, 2009

  • 1986 Answers

SOURCE: how to remove passenger side mirror

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then pull off the cover adjacent to the mirror and remove the bolts holding the mirror on. Once the mirror's off, you should see the harness / plug

Posted on Aug 14, 2009

ZJLimited
  • 17970 Answers

SOURCE: 2000 Saturn SL2 driver's side

Fore remove the door panel in a SL2, you have to take off the door handle. You have to disengage the door locking mechanism from the door handle, then unscrew the panel and take it off.

The door handle unhinges from the locks and from the window controls. If your windows are electric, just unsnap the cord attached and leave it hanging out.

You may have to work with the door handle as it won't come out of the slot very easily and you don't have a lot of room. A flat bladed screwdriver with a long metal piece should work to unsnap it.


ION, L-Series, S-Series 1999-2005 - Window Systems

Door Glass & Regulator
Power Windows
Diagnosis & Testing
Driver's Window Switch

  1. Turn the ignition OFF, disconnect the harness connector at the driver window switch.
  2. Test for infinite resistance between the signal terminals A and B and the B+ circuit terminal E with the passenger window switch in the INACTIVE position. If less than infinite resistance, replace the driver window switch.
  3. Test for less than 2 ohms of resistance between the signal terminal A and the B+ circuit terminal E with the passenger window switch in the UP position. If greater than 2 ohms, replace the driver window switch.
  4. Test for less than 2 ohms of resistance between the signal terminal B and the B+ circuit terminal E with the passenger window switch in the DOWN position. If greater than 2 ohms, replace the driver window switch.
  5. Test for infinite resistance between the signal terminals F and H and the B+ circuit terminal E with the driver window switch in the INACTIVE position. If less than infinite resistance, replace the driver window switch.
  6. Test for less than 2 ohms of resistance between the signal terminal F and the B+ circuit terminal E with the driver window switch in the UP position. If greater than 2 ohms, replace the driver window switch
  7. Test for less than 2 ohms of resistance between the signal terminal H and the B+ circuit terminal E with the driver window switch in the DOWN position. If greater than 2 ohms, replace the driver window switch.
Passenger's Window Switch
  1. Turn the ignition OFF, disconnect the harness connector at the passenger window switch. Test for infinite resistance between the signal terminals G and F and the B+ circuit terminal with the switch in the INACTIVE position. If less than infinite resistance, replace the switch.
  2. Test for less than 2 ohms of resistance between the signal terminal G and the B+ circuit terminal with the switch in the UP position. If greater than 2 ohms, replace the switch.
  3. Test for less than 2 ohms of resistance between the signal terminal F and the B+ circuit terminal with the switch in the DOWN position. If greater than 2 ohms, replace the switch.
Window Motor
  1. Install a 30-amp fused jumper wire between the control terminal A and 12 volts. Momentarily install a jumper wire between the control terminal B and ground. The motor should perform the UP or DOWN function.
  2. If the function does not perform as specified, replace the motor.
  3. Reverse the jumper wires; the motor should perform the DOWN or UP function.
  4. If the function does not perform as specified, replace the motor.
Removal & Installation
Window Motor & Regulator
  1. Raise the window to the full UP position.
  2. Remove the upper trim panel.
  3. Remove the manual window regulator handle, if equipped.
  4. Remove the power door lock switch, if equipped.
  5. Remove the pull cup assembly.
  6. Remove the door trim push-in retainers.
  7. Remove the screw from the trim panel.
  8. Pull the bottom of the door trim out to disengage the clips.
  9. Lift up on the door trim panel to disengage the inner belt molding from the door flange.
  10. Remove the door trim panel.
  11. Remove the radio speaker.
  12. Remove the front door water deflector.
  13. Disengage the door glass to the regulator sash channel clips. Separate the door glass from the sash channel.
  14. Push the window to the up position and tape in place.
  15. Loosen the power window regulator bolts.
  16. Remove the rear regulator bolt.
  17. Lift the window regulator, disengaging the loosened bolts from the door.
  18. Disconnect the regulator electrical connector.
  19. Remove the power window regulator from the door.
To install:
  1. Installation is the reverse of removal.
Window Switch
  1. Using a flat-bladed tool, pry the switch from the door trim panel enough to expose the locking tabs.
  2. Press the locking tab to remove the switch from the door trim panel.
  3. Disconnect the electrical connector.
  4. Remove the switch.
To install:
  1. Installation is the reverse of removal.

I hope helped with this; good luck.

Posted on Oct 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove passenger door panel on 2006 saturn vue


Remove arm rest, door handle, pry from the panel snaps and pull up and out.

Dec 30, 2015 | 2008 Saturn VUE

1 Answer

Saturn 1997 SL1's window ragulatior or motor is not working. The window will not go up. How do I get the ragulator out ?


You'll need to remove the outer door panel. There are torx head bit bolts going into the outer panel from the inner door. You'll need to remove the door handle, there is a small pin to remove and side of the door handle. Remove the chrome or black molding at the top of the door, against the window.

May 10, 2010 | 1997 Saturn SL

1 Answer

Need to remove inner rear passenger side door


On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you need to pull back the weather seal and then you can access the bolts securing the outer handle

Nov 05, 2009 | 2006 Honda Pilot

1 Answer

I need instructions on replacing the passenger side external door handle with electric locks


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can pull back the weather seal and disconnect the linkage to the outer handle and remove the bolts holding the outer handle on

Oct 15, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

I am trying to replace the outside door handler and I need to know how can I remove the interior door cover


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can pull back the weather seal and disconnect the linkage to the outer handle and remove the bolts holding the outer hand on

Oct 09, 2009 | 1995 Toyota Camry

2 Answers

I have a 1996 Saturn SC2 and I need to change motor on driver side but can not get the out side part of door off. how do you remove that portion of the door?


Just wanted to let everyone know, in order to change the window regulator on a 1996 saturn you do need to remove the exterior door which is connected by about ten lock screws around the inside of the door. you also need to remove the side view mirror and the door handle which has a little plug on the bottom right side that should come out with a pair of needle nose or something, then the handle should slight to the left and off. Pull the hole outer panel up and off and there you go. But you do still need to remove the inner door panel to put new nuts and bolts to hold the new regulator in because the orginals are held in buy rivets so you have to drill those out.
Hope that helps anyone.
-Jensen-

Sep 14, 2009 | 1996 Saturn SC

1 Answer

Replacing passenger door handle


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Disconnect the rod connecting to the interior handle (replace this handle if you need). Otherwise pull back the weather seal and remove the bolts securing the outer door handle and disconnect the rod from that one...

Sep 10, 2009 | 1999 GMC Safari

1 Answer

Replacing front passenger window motor/regulator... Got inner door panel off, outer door skin bolts out, but don't know how to take off the outer door handle so the door skin can come off. Not very...


I don't think you need to remove the outer door handle.I hope this helps and google search a bit on it and you will get the answer.According to my experience,to replace the window you don't need to remove to outside door handle..Hope this helps.

Jun 16, 2009 | 2000 Saturn Ls 4dr Sedan

1 Answer

Replace passenger side mirror on 2008 Impala


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Apr 28, 2009 | 2008 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...