Question about 2006 Hyundai Azera

Open Question

2006 Azera internal hood release handle disconnected from cable. How do you get the cable back into the handle?

Hood Release disconnected from cable

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

maklean
  • 1665 Answers

SOURCE: Hood Release broken or dislodged

913e88e.gif1. After loosening the hood hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjust the hood height by turning the hood overslam bumpers (C). 3. After loosening the hood latch (D) mounting bolts, adjust the hood latch by moving it up or down, or right or left.8f7309a.gif

Posted on Jun 05, 2008

junmag
  • 175 Answers

SOURCE: Hood latch disconnected

small plastic tie straps will do the trick

Posted on Jun 03, 2009

  • 196 Answers

SOURCE: How open the hood. The interior hood release

I'm taking a guess that the cable your referring to is the cable inside the car, if so inspect the cable, can you see the metal cable inside the black housing, if you do, take a vice grips and grab onto tightly and pull, this should release the mechanism same as if you pulled the latch, otherwise if you can't see the cable within, crawl under the front of the car, between the radiator and grill, reach up to the latch and disconnect the cable that comes from the inside of the car, it will be the only cable coming to the latch assembly, as you remove it, it kind of just clips in place, you will see what it pulls to release the latch, grab a screw driver and lightly force the piece over to pop the hood, i know it can be frustrating from experience, took me a while the first time, and they sure don't give you much room to work with, but a little patience will pay off with this , wish you the best of luck!

Thanks for using FixYa!

Posted on Sep 02, 2010

  • 245 Answers

SOURCE: my hood release is missing!!!

the only way to open the hood is try to take off the panel where the hood release was and try and find the cable so you can open it then get a new cable and replace it

Posted on Jan 24, 2011

  • 878 Answers

SOURCE: I have a Hyundai Elantra

see if can take the grill off you should see whats going on ,and loosen the the two bolts holding down the latch

Posted on Feb 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hood release inside car isn't working


yes actually, you might need to lay on your back with a pair of pliers though, when you pull on the hood-release handle under the dashboard, you will see a wire cable behind the plastic handle, grip that wire with the pliers and pull till you hear the hood pop, then adjust the cable from under the hood to remain shorter.(it's stretched a bit over time is all)

May 07, 2014 | 2002 Chrysler 300M

1 Answer

How do i replace the hood release cable & pull arm?


Open the hood, disconnect the cable from latch, remove all the cable clamp that secure it all the way inside to handle release arm. Reverse procedure on going back with the new part. Good luck.

Nov 16, 2013 | Jeep Grand Cherokee Cars & Trucks

2 Answers

1998 VW Beetle inside hood release handle broken


Their is a cable in the control access the cable and pull on it with a pair of pliers then replace the part

Aug 27, 2012 | 1998 Volkswagen Beetle

1 Answer

2006 expedition battery is dead and the hood release will not work


Apply some downward pressure on the hood (careful not to dent it) to relieve some of the pressure on the latch, and have someone else pull the release handle. If the cable is broken you are going to have to wiggle under the engine bay and hope you can manually release the hood latch. I hope this helps!

Dec 18, 2011 | 2006 Ford Expedition

1 Answer

Hood wont release from interior release. cable is attached to release handle. its on a 1999 passat


try pressing down on edge of the hood as someone pulls the release handle. Or shake hood up and down while pulling the release cable. The cable may have broken at the latch end.

Sep 19, 2011 | Volkswagen Passat Cars & Trucks

2 Answers

Hood release cable disconnected.Is there any way to release hood from outside of car?2004 Suzuki Forenza


The cable terminates at the latch release located at the front center of the hood. If you can get to this, usually by removing the grill, find the lever the cable terminates in and move it manually with whatever tool you can get in there.

Sep 01, 2011 | 2004 Suzuki Forenza

1 Answer

The hood release is broken how do I get my hood open


IF HOOD LATCH RELEASE CABLE BROKE AT RELEASE HANDLE YOU CAN TAKE A PAIR NEEDLE NOSE PLIERS PULL THE CABLE ENOUGH TO OPEN HOOD SO YOU CAN REPLACE RELEASE CABLE.

Aug 31, 2010 | 2001 Dodge Intrepid

2 Answers

The hood latch cable broke under the hood how can i open it


Saturn Vue hood release can be opened (if the cable is not broken) by disconnecting the cable from the back of the release lever, grabbing the ball on the end of the cable with some large pliers ("channel locks") and pulling hard. A metal "wire keeper" bracket clamped to the cable end under the hood to serve as a spacer and the release lever works.
The purpose of this bulletin is to provide a procedure for opening the hood on the Saturn VUE and ION vehicles should the hood latch release cable mechanism become inoperative.

VUE Hood Opening Procedure Modify the Saturn radio antenna by bending the antenna mast 1 in. (2.54 cm) above the antenna base to a 25 degree angle

Open hood of similar vehicle to locate hood latch release cable to hood latch attachment point.

Using modified antenna, note approximate location that antenna will have to enter in between fascia and hood to access the hood latch cable attachment point. This should be toward the left edge of the Saturn emblem. Also note position of the modified antenna base. It should be angled downward.

Note: Use protective tape on the hood and fascia where the antenna will be inserted to protect the surfaces from scratches
On vehicle with inoperative latch, insert antenna between hood and fascia and depress the hood latch cable until the hood is opened.

Good luck and thank you for using fixya

Mar 15, 2010 | 2003 Saturn VUE

1 Answer

Does any one know how to open the hood on a 1987 300e if the latch doesn't release


There is a release cable that is attatched to the red releas handle on the drivers under dash panel. You can grab that cable with needle nose pliers to release the hood to the first detent if the handle or cable is broken. There is a secondary release mechanism(called a hood tongue) which routes through the grille where the rectangular slot is once the hood is popped up with the release handle.you can grab the rest of the broken hood tongue with needle nose pliers and pull it out to completly release the hood from the saftey catch. If it is completely broken you can take a long screw driver and push the saftey catch( i beleive to the right) and the hood should be able to open all the way up. Both the hood tongue and the cable(securing portion at release handle) are common failures and break over the years.if it is at the release handle you are having a problem-get a #2 phillips screw driver and remove the release handle to gain access to the loose cable. I hope I have been helpful

Oct 07, 2009 | 1990 Mercedes-Benz 300 Diesel

1 Answer

How do I open the hood of a '95 K1500if the latch release fails?


You may have a disconnected cable, or the release spring won't pop up the hood. First try having someone else lift up on the hood as you try the release, this may open it. If not, the cable may be disconnected, where you will need to pull the plastic pannel off inside your truck where the hood release lever is. Inspect the handle, and where the cable goes into it. Also try using a pair of pliers on the cable once it's off the handle, because it may be stretched or broke. If that does it, you will need another cable, or just carry the pliers with you.
Hope this helps

Dec 16, 2008 | 1996 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...