Question about Cars & Trucks

Open Question

How do i open the bonnet of an iveco daily with a broken cable

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ourhowse
  • 2007 Answers

SOURCE: Bonnet cable snapped, need advice on how to open bonnet

If you can, get a hold of the cable somewhere with a pair of pliers and pull it. Did it snap right at the release handle or somewhere in the middle?

Posted on May 21, 2009

  • 13 Answers

SOURCE: VW Bora: Can't open bonnet

first of all not an easy job,you need to get the front grill off and look upwards for a cover that will be covering up the bonnet catch,basicly bend or pull this off,you should then see were the cable goes in,then you should be able to bar the catch with a screwdriver to release it. best of luck

Posted on Jul 15, 2009

  • 1 Answer

SOURCE: Bonnet release cable is broken - how do I open the

remove the o/s/f indicator this can be done by putting a thin screw driver between the bonnet and wing to push the indicator release tab down. once the indicator is out of the way you can see the bonnet catch behind the headlamp use a torch to locate where the cable should be and pull the latch towards you. it should take you about 10 mins to do this

Posted on Nov 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adjusting hand brake cable on iveco daily truck


crawl under it and look at what is there to work with .

May 26, 2016 | Cars & Trucks

1 Answer

How do I get my 07 Iveco daily to start as I changed all the fuses as I had blown the wiper one and now the immobiliser does not let me start it.


Try starting from scratch, disconnect battery for a few minutes and reconnect, ECU are usually reset and it may clear this default in your immobilizer. FREE-PPV.com

Apr 03, 2016 | Cars & Trucks

1 Answer

How do i fix broken bonnet cable on s type jaguar 2003 model


You will need to reach up from underneath and either locate the latch and pull it or grip the cable near the latch and pull that to try and release the bonnet catch!

May 09, 2015 | 2003 Jaguar S-Type

3 Answers

Bonnet cable broken, how to open bonnet


The cable can break either at the left or right hand latch - if you are lucky as I was, the cable operating the left hand catch was the broken one, and was broken near the right hand latch release mechanism.
I was able to open the right hand latch with the bonnet release from inside thecar.
You then have to get a piece of fairly strong wire(I used a 2.8mm welding rod) and bend a fairly tight hook in one end. Using a torch so you can see the bonnet release cable, feed the wire in through the grill and hook the swage on the end of the cable that operated the left hand latch. A frim pull on the wire should then release the left hand latch.
Good luck!

Oct 23, 2010 | 2000 Jaguar S-Type

3 Answers

Audi a4 bonnet release mechanism broken


This can be over come by getting a pair of vise grips and gripping the cable that is sticking out and pulling it out, once you have opened it Do not attempt to close the hood without replacing the cable. You have maybe only one chance at this so if you don't succeed you will make it harder for a mechanic to fix it. a new cable is not to difficult to replace, buy the cable and housing replace both.

Jul 07, 2009 | 2005 Audi A4

1 Answer

Broken bonnet cable/bonnet catch on vw gulf tdi


Under vw logo there is a special hole, just put a hook inside and there you go!

Apr 03, 2009 | 1992 Honda Prelude

2 Answers

Reprogramming blank key iveco daily


Unfortunately there is no solution to this except to take it back to Iveco for reprogramming.

I am led to believe from my locksmith that there are two types of transponders generally put into cars and vans.

The first is a simple chip wtih a code which matches a code in the car / Van

The second is a chip which has a set of codes. They are read in order and the car / van remembers which one was used last. If you use the wrong code in the sequence then the car / van will ignore it and not let you start the engine.

The Iveco is unfortunately in the second group. If, like me, you snap your key, you can superglue a new key to the old and it works fine. The chip doesn't need to be "too" close to the barrel. Yes, it looks ugly, but it's much cheaper!

Mar 15, 2009 | 2000 Chevrolet Tracker

2 Answers

Iveco servicing


hi the axle is one of the few things that don,t fall apart on these vans but gearbox oils axless etc like engine oils need replacing regular if you want them to last i would change it every 50000 mile yates210456

Oct 13, 2008 | 2007 Ford F

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...