Question about 2007 Nissan Titan King
Car won't start and have wrench light on dash
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2000 nissan maxima won't fire
sounds like it might be flooded. Try and remove the fuel pump fuse from the fuse block that is just in front of your left knee. While it is out crank the car and see if it wants to start and hold down the gas pedal all the way and then relase it and back and forth and once you get it to run have the fuse ready in your hand and in front of the spot to install it. and then keep the rpm's up with the gas pedal until the smoke clears out behind the car.
Posted on Jul 02, 2011
SOURCE: Nissan sentra 1993 1.6 l
Make sure you have the plug wires on the correct plug. Check the
ignition timming to make sure it is correct. After running for a few
minutes pull the pluggs to see whitch cylinders are running rich. The
fuel pressure and volume need to be tested.
1993 Nissan Sentra 1.6 liter DOHC L4 (GA16DE)
Additionally, try checking the power transistor. I will send the test. Also make sure the coil has a good ground...
Hope this helps; keep us updated.
Posted on Jul 13, 2011
before replacing igniter check cam and crankshaft sensor, if no siganl no you get no pulse for injectors or spark, best to use a lab scope here to check wave pattern usually sine wave.
Posted on Jul 20, 2011
SOURCE: 1997 nissan sentra- goin down
How did you check the compression? A simple and fast way is to remove a spark plug and hold a finger over the hole, with the coil unplugged, and have a helper crank the engine. What has probably happened if you have lost compression is that the timing belt broke resulting in the valves contacting the pistons, in this case the best option for repair would be to find a good used engine (from a reputable salvage yard with a warranty) and do a swap.
Posted on Aug 15, 2011
check fuseable link near battery if it's blown would pay to look for short circuit before doing much more
Posted on May 31, 2012
Tips for a great answer:
Mar 30, 2013 | Cars & Trucks
Dec 21, 2012 | Cars & Trucks
Sep 03, 2012 | Cars & Trucks
Jul 22, 2012 | 1987 Nissan Pulsar
Jul 05, 2012 | Nissan Maxima Cars & Trucks
Jun 08, 2011 | 2002 Nissan Sentra
May 27, 2011 | 2000 Nissan Xterra
May 20, 2011 | Saturn L-Series Cars & Trucks
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: