Question about Chrysler Voyager
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Make sure the oil level is good, and have the oil pressure check by a garage or someone who can, by using a external gauge to see what the actual oil press is. Low oil pressure will give you the ticking, start there.
Posted on Aug 05, 2009
The Chrslyer engines are prone to carbon build up in the engine when they are not driven hard. When the misfire occurs the engine runs rough, the car shakes a bit, and the check engine light comes on. The good news is that this is a recognized issue at Chrslyer. There is a Technical Service Bulletin (TSB) out for this. Synchronicity in the Universe being what it is, my car is in the shop at this moment being serviced for this very same thing. It is a 2002 300M Special Edition with 57,000 miles on it. I haven't been driving it as much because I started taking a commuter train to work and when I do run it, I do not let the engine get up to operating temperature nor do I run it at highway speeds - thus the carbon build up. You may simply need to have the carbon blown out of the engine. Talk to a Chrysler Tech about a TSB for carbon build up leading to intermittent engine misfires and see if this might be at the bottom of the problem.
Posted on Sep 24, 2009
SOURCE: 2006 Chrysler 300, no start
It is all about troubleshooting. Possible causes are a dead battery. Did someone try to steal it and cut the wrong wires underneath?
The starter solenoid could be bad.
If the headlights stay bright when you try to start the car then it is not the battery. if you hear clicking and the headlights are very dim then it is likely to be the battery. If you have full battery with good cable connections and you get very active clicking but no starts then the solenoid on the starter has burned contacts. if battery is good but no clicking when trying to start then the problem is in the key area or alarm system.
All the areas mentioned above are place to start and troubleshooting steps.
Posted on Mar 09, 2010
Testimonial: "Thanks for the input, I'll go through the systems individually and see what I come up with Thanks again, A"
Tips for a great answer:
Sep 09, 2016 | 2006 Chrysler 300
Oct 13, 2012 | 2006 Chrysler PT Cruiser
Dec 07, 2011 | 2005 Chrysler 300
Aug 25, 2011 | 2006 Chrysler 300
Jun 02, 2011 | 2006 Chrysler 300
Dec 14, 2010 | 2006 Chrysler 300
Aug 05, 2009 | 2006 Chrysler 300
62 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: