Question about 2007 Toyota Camry
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The 3.3 no longer has a "spin-on" filter. The filter is now a "cartridge-type", and is housed in a cricular aluminum housing under the engine.
Posted on Jan 02, 2009
SOURCE: 2007 4 cylinder camry se
Their is a huge difference between leaking and using oil. place a large piece of carboard under the car one night and see if their is a lot of oil on the carboard the next moring. If so, try to look under the car and see if you can tel where the oil is coming from. Have the leak fixed. It might be as simple as loose bolts. If the engine is consuming oil because it has high mileage the use regular 10w40 or even 20w40 if you are in a warmer climate. If it is using oil you cannot afford to use the high priced synthetics. These are for relitively new cars .As it uses oil just replace it with the regular 20-w40 or 10w40. To slow down consumption use STP or MOTOR HONEY.or some other oil thickening agent on the market made for worn engines.
Posted on Jan 07, 2009
Testimonial: "U r thinkin along the same lines as i am. Just was a little hesitant 2 use a much heavier oil than recommended. It iz ok, right????"
1993 Camrys take regular Dexron ATF. It should be changed every 30,000 miles. If you have never changed it, and it is over 100,000 miles, I would strongly suggest a professional "transmission-flush", with a designed specifically for flushing transmissions. To just drain the fluid at this point will leave roughly 3 quarts of dirty ATF in the system; a complete flush will eliminate ny dirty ATF traces.
Posted on May 19, 2009
Your oil sensor may be faulty, or your oil may be low, or your may have a leak. By taking your foot off the gas, you're reducing the oil pressure
Posted on Sep 15, 2009
4 cylinder diagram
6 cylinder diagram
Loosen the tensioner pulley to remove the belt. It is the one that has a long bolt running through it. Once you remove the old belt, install the new one using the appropriate diagram from the above two links. Readjust the tension using the bolt you loosened to remove the old belt.
i hope this helps
Posted on Nov 20, 2009
Tips for a great answer:
Jan 06, 2017 | 2007 Toyota Camry
Apr 18, 2017 | 2007 Toyota Camry
Nov 05, 2012 | 2007 Toyota Camry
Aug 16, 2012 | 2007 Toyota Camry
Apr 03, 2011 | Toyota Camry Cars & Trucks
Feb 20, 2010 | 2007 Toyota RAV4
Jan 06, 2010 | 2007 Toyota Camry
Oct 23, 2009 | 2007 Toyota Camry
Sep 15, 2009 | 2007 Toyota Camry
Jan 07, 2009 | 2008 Toyota Camry
151 people viewed this question
Usually answered in minutes!