Question about Holden Barina

Open Question

The car stalls when slowing down to a lower gear

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 10 Answers

SOURCE: stalling

is it possible that the idle speed is set to low?

Posted on Sep 06, 2008

karding_1984
  • 76 Answers

SOURCE: Engine stops while stopping when clutch depressed and slows down.

sound like something killing your engine when was the last time that you change your fuel filter might be causing it..

Posted on Jan 08, 2009

  • 1 Answer

SOURCE: Vibration when in gear, and stalling.

The problem is the torque converter solenoid. I had it happen on my 94 Cavalier a few years back and was a cheap fix at the local car mechanic. What happens is the transmission warms up and hits a certain speed where the solenoid engages, but then it sticks and won't disengage until it cools down sufficiently. When it sticks, it causes the car to shake when slowing down and will snub out the engine if you come to a stop.

Posted on Mar 25, 2009

  • 83 Answers

SOURCE: Car wants to stall while driving

Check for trouble codes first thing, It could be a number of things. example, mass air flow sensor, map sensor, crank sensor, ignition module. Check for codes first to see if there are any. That will help you get on the right track

Posted on Jul 26, 2009

  • 2 Answers

SOURCE: transmission light wont go out,car bogs down when

most likly youl need new gear box. that would be the easiest way to solve it i imagine

Posted on Aug 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stalls when slowing down


check idle speed sensor as the motor is still under load while slowing down. Try placing tranny in neutral before slowing down and see if that improves the situation. Check the idle speed while stationary and in gear. It should drop 100-200 rpm under neutral idle but any more and I would be looking at idle speed sensor .

Jan 23, 2013 | 2000 Ford Taurus

1 Answer

97 Honda Civic Dx is surging. When driving at high speeds car slows down as if about to stall. Then at lower speeds car engine runs high as if trying to change gears to a high speed. What is causing t


is the check engine light on? sounds as tps is acting up. the TPS sends signal to the ECM to help control transmission performance and shift points.

Jun 11, 2012 | Honda Civic Cars & Trucks

1 Answer

When slowing down, everything is fine, until its almost time to fully stop, then the car acts like it is going to die. if I put the car in nuetral, then stop, its fine, it only does this in drive and at a...


Are there codes in the transmission computer? Likely the torque converter clutch is not disengaging or a holding member with the transmission could not be releasing. this could be caused by a faulty shift solenoid or a mechanical failure with the transmission. Check to ensure the transmission shift properly under all conditions. Also, stall test the torque converter, put it in gear hold the brakes firm and throttle the engine. Generally the torque converter will stall out around or above 2,000 rpm. If it stalls out much lower, check the torque converter clutch solenoid for proper operation.

Again, check the transmission computer for codes. You will need an advanced OBD1 scan tool which can communicate like a hikock scan tool ( ford factory for that era)

Dec 15, 2010 | 1994 Ford Taurus

1 Answer

My car stall when u are slowing down or stopped.


if this happens when the vehicle is in gear it is probably the torque converter solenoid not releasing the converter

May 13, 2010 | 1989 Pontiac 6000

1 Answer

Problems accelerating


the engine tickover is too slow when the engine is cold its running on cold start, ie:choke,, after it warms up the engine slows down this is what is causing it to stall in gear,, get some one to hold the brakes hard on and with the engine running in gear ajust the tick over till its reving at 750 - 850 rpm the revs will go up a bit when its out of gear,, before you pick a gear to go into push the foot brake down to stop the car lurching,,,

Feb 19, 2010 | 1997 Cadillac DeVille

1 Answer

Car idles, starts just fine but when I shift into gear it stalls.


It sounds like the kick down cable or "down shift cable" This is the cable on the transmission that shifts back down when the car slows. The transmission is most likely stuck in a higher gear and simply stalls the engine when shifted. replace this and i believe you will be back on the road. Hope this helps. Good luck.

Jun 10, 2009 | 1994 Plymouth Acclaim

2 Answers

Vibration when in gear, and stalling.


The problem is the torque converter solenoid. I had it happen on my 94 Cavalier a few years back and was a cheap fix at the local car mechanic. What happens is the transmission warms up and hits a certain speed where the solenoid engages, but then it sticks and won't disengage until it cools down sufficiently. When it sticks, it causes the car to shake when slowing down and will snub out the engine if you come to a stop.

Mar 09, 2009 | 1994 Chevrolet Cavalier

2 Answers

2002 bmw 325i running rough


Check idle air control valve. If functioning properly and next common problem from my experience is a BAD CRANK SENSOR. Good Luck and thanks for using FIX YA

Jan 11, 2009 | 2001 BMW 325

1 Answer

Engine stops while stopping when clutch depressed and slows down.


sound like something killing your engine when was the last time that you change your fuel filter might be causing it..

Jan 08, 2009 | 1999 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Holden Experts

yadayada
yadayada

Level 3 Expert

74914 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14185 Answers

Are you a Holden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...