Question about Mazda Tribute
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
had the same prob on mine underneath the front seats are seat belt tensioner plugs 1 under driver and 1 under pass. seat unplug them and plug them back in , i found this solution on this site somewhere and it worked saved me a lot of money, almost took it to the dealer
Posted on Mar 27, 2009
hook the car up to a scan tool and see what kinds of codes that the computer is sending out. You can take it to autozone and get your car scanned for free. They will let you know of any codes that are in the system.
Posted on Jun 10, 2009
Removal & Installation
2002-2004 Ford Escapes should be filled with Motorcraft Premium Gold Engine Coolant or equivalent (yellow color). Always fill the cooling system with the same coolant that is present in the system. Do not mix coolant types.
NOTE: Do not add/mix orange-colored Motorcraft Specialty Orange Engine Coolant. Mixing coolants can degrade the coolant’s protection.
NOTE: The addition of Motorcraft Cooling System Stop Leak Pellets VC-6 darkens Motorcraft Premium Gold Engine Coolant from yellow to golden tan.
Used engine coolant should be disposed of in an appropriate manner. Follow your community’s regulations and standards for recycling and disposing of automotive fluids.
Never remove the pressure relief cap under any conditions while the engine is operating. Scalding coolant and steam will cause damage to the cooling system, engine and will result in personal injury. Wait until the engine has cooled. The coolant should be recovered in a clean container for reuse. If the coolant is contaminated, it must be recycled or disposed of correctly. Note that only about 80% of coolant capacity is recovered with the engine in the vehicle. Dirty, rusted or contaminated coolant requires replacement.
Posted on Jun 19, 2009
I cannot locate any diagrams and have not worked on this particular vehicle. I did find some info that may help...
Posted on Nov 07, 2009
bank 1 is the bank of cylinders closest to the firewall. the sensor will be located along the exhuast from that side after the catylitic converter
Posted on Apr 01, 2010
Tips for a great answer:
Jan 30, 2016 | 2005 Mazda Tribute
Jan 14, 2016 | 2005 Mazda Tribute
Nov 15, 2015 | 2004 Mazda Tribute 3.0
Jun 20, 2012 | 2003 Mazda Tribute
Jun 05, 2012 | 2003 Mazda Tribute
Jan 19, 2010 | 2001 Mazda Tribute
Nov 07, 2009 | 2004 Mazda Tribute
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: