i got the shift selenoid and it goes inside the trans does anyone have a diagram or how do i tell which selenoid is a b or c i got the shift selenoid and it goes inside the trans does anyone have a diagram or how do i tell which selenoid is a b or c
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Chances are the transmission being in 3rd gear is a safety feature to help keep you from being stranded on the road.
All of the codes are transmission faults which means you will need to get it to a shop for diagnosis.
The codes are for shift solenoids and torque converter issues.
code p0700 refers to transmission control system/ MIL- malfunction===causes--wiring ---TCM replace the TCM code p0750 refers to shift solenoid9SS) A-circuit malfunction===causes --wiring---shift solenoid ECM/TCM. When the TCM is replaced then it should be fixed as the TCM is common in both faults.
P0743 Torque Converter Clutch Circuit Electrical P0750 Shift Solenoid A
P0755 Shift Solenoid B
P0760 Shift Solenoid C P0442 Evaporative Emission System Leak Detected (small leak) P0133 O2 Sensor Circuit Slow Response - Bank 1 Sensor 1 P1131 Lack of Upstream Heated Oxygen Sensor Switch -Sensor Indicates Lean -Bank 1
The transmission has a problem with shifting, and the evaporative emission system has a small leak, the O2 sensor has a problem on Bank 1 Sensor 1 either in the sensor or wiring.
p0320 is Ignition/Distributor Engine Speed Input Circuit Malfunction which could mean that the rpm(revolution per minute) sensor is bad or there is something wrong with the wiring.
p0750 is Shift Solenoid A Malfunction which means your solenoid that shifts your transmission into a lower or higher gear is no good. i would have it checked out by a mechanic. hope this helps
its a 2004 ford tauras 3.0 and it wont shift
i got the shift selenoid and it goes inside the trans does anyone have a diagram or how do i tell which selenoid is a b or c
×