Question about 2001 Chevrolet Impala

Open Question

How do i reinstall factory stereo wires in a 2001 chevy impala

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 142 Answers

SOURCE: UNLOCK CODE

Here is what you do ;
1. Press and hold the presets 2 and 3 for about 5 to 10 seconds until you
get 3 digits on your display. This is the first 3 of 6 digits you will
need, so write them down.
2. After doing step 1 and writing down the code, immediately press
the
AM/FM button to get the last 3 of the 6 numbers you'll need, and write
those down. (if you wait too long between steps 1 and 2 and the LOC code
displays again, you will have to start over).
3. Call this number, it's a prerecorded message, so don't worry about
having to talk to anyone...1-800-537-5140. The voice will ask if
you're
calling for Chevy, Pontiac, Cadillac, etc... When you here him tell
you
to press "1" for Chevrolet. They will ask
you
for the 6 digit code that you've written down. Enter that and press
the
* key. They will give you a code, and the option to get additional
4
digit codes, but 1 should be sufficient.
4. Follow the procedure in your owners manual for unlocking the
radio with your new code, press the hour set button on your radio
until
you get the first two numbers of the code, then press the minute set
button until you've entered the last two numbers. Immediately press
the
AM/FM button once the correct code is entered and the code SEC or
secured will be displayed on the display screen. Now, just turn the
radio on, and you are finished.
There is another step you can take to remove all codes from the
radio and start from scratch by entering your own personalized 4 digit
code so that you don't get locked out again. Just repeat step four
and
you should get a display screen that reads ---meaning the code is
out, and you can program your own code. Once you
receive
the 4 digit code from the recorded message, store it , because you can use that same code again.
Please remember to rate this fix.

Posted on Feb 14, 2009

Molson02536
  • 3854 Answers

SOURCE: the stereo wire colors for the 2001 chevy s 10

Radio 12v  orange  +  radio harness Radio Ground  black  -  radio harness Radio Ignition  dk. green  +  radio harness Radio Illumination  brown  +  radio harness Factory Amp Turn-on  orange  +  radio harness Notes: The amplifier is behind the glove box. Power Antenna  N/A     LF Speaker +/-  tan - gray  +,-  radio harness RF Speaker +/-  lt. green - dk. green  +,-  radio harness LR Speaker +/-  brown - yellow  +,-  radio harness RR Speaker +/-  dk. blue - lt. blue  +,-  radio harness

Posted on May 02, 2009

MNfisherman
  • 11896 Answers

SOURCE: trying to remove a factory stereo in my 2001 chevy

If this is the kind with 4 holes in i, then you need to get the removal tools or use 4 nails or long screwdrivers all at same time and pull out the stereo.
If you do not have the holes, then you may have the kind that requires tools to slide in sides between stereo and bracket to loosen the hold. A butterknife sometimes works for this..

Posted on Sep 04, 2009

  • 58 Answers

SOURCE: how do you change a key switch in a 2001 chevy

If your key is worn try getting a new one cut.
The ignition lock cylinder and keys do not contain any coded electronic components. The lock cylinder housing contains the coded electronic components. Changing an ignition lock cylinder or replacing a key is a purely mechanical process which does not affect the vehicle theft deterrent system. To replace an existing key, simply cut a new key to match the existing one. If no keys are available, the lock cylinder must be changed. To change the lock cylinder, simply replace the existing lock cylinder with one of the same type.
If you are unable to operate the ignition cylinder with a new key then you will probably need to replace the cylinder and switch.Replacement of the switch involves reprogramming
The system may be programmed with or without a scan tool.
There is a way to get the cylinder out without replacing the switch but this procedure should be performed by a qualified GM technician as it involves removal of the switch and some precise drilling.

Posted on Nov 01, 2009

Testimonial: "very helpful. thanks"

  • 89 Answers

SOURCE: need a car stereo wiring diagram for a 2000 chevy

try http://www.technomagazin.com

Posted on Nov 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to wire a factory chevy impala 2001radio


Www.modifiedlife.com has an excellent resource for oem wiring

Oct 14, 2016 | 2001 Chevrolet Impala

1 Answer

Need a factory stereo wiring diagram for a 04 Chevy Impala LS 3.8


Do an Internet search using Google or Yahoo, or check with your local dealership. We don't have any diagrams here!

May 12, 2015 | 2004 Chevrolet Impala

2 Answers

Where can i get a free color wire diagram to reinstall factory stereo in my 2001 chevy impala


your local library should have Mitchell books with wiring diagrams in them the books should be in the reference section u probably wont be able to take book home but u should be able to photo copy the pages u need

Jan 04, 2013 | 2001 Chevrolet Impala

1 Answer

Radio wires what is which?


If you are trying to hook up a new radio and you still have the factory plug then you can buy an adapter at a car stereo store that has all the correct color wires on it for the new stereo. This also makes it easy to reinstall the factory stereo if ever you wish to.

Oct 04, 2012 | 2001 Chrysler Town & Country

1 Answer

On a 2003 chevy impala is it ok to replace the factory stereo with an aftermarket cd player even with the security feature?


Yes it is, the security feature on the radio is just for the radio itself. You may also be able to find a used factory CD stereo for the car fairly cheap on ebay.

Dec 04, 2010 | 2003 Chevrolet Impala

1 Answer

Can i get a free diagram of the stereo wiring in my 2001 chevy impala, some times works most of the time it doesnt


What is the wires you put together on a new radio taking out the factory with no harness that all of the speakers will come on

Jul 18, 2010 | 2001 Chevrolet Impala

1 Answer

I want to reset the low tire pressure light from my 2001 chevy impala. I go into the stereo disp. Button but the option is not in there how can I reset it without using the stereo?


I want to reset the low tire pressure light on my 2003 chevy impala. I go into the stereo disp. button, but the option is not there. How can reset it without using the stereo?

May 20, 2010 | Cars & Trucks

2 Answers

Factory radio is locked


My 2001 Chevy impala radio is lock how I unlock it

Apr 17, 2010 | 2001 Chevrolet Impala

1 Answer

Replacing my stereo harness? or getting it to fit my aftermarket


should go to any local junkyard to get the stock harness, or you can decipher and splice each vehicle wire to the appropriate wire on the stereo. If it was me, i'd go the junkyard route, much easier in the long run.

Sep 29, 2009 | 2001 Chevrolet Impala

Not finding what you are looking for?
2001 Chevrolet Impala Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...