Question about 2008 Ford Explorer

Open Question

P2107 p2110 throttle actuator ctrl mod processor

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 111 Answers

SOURCE: 06 crown vic stalls out when full throttle

put these codes directly one at a time on google search and you will find the result

Posted on Sep 13, 2009

Ad
jturcotte
  • 8531 Answers

SOURCE: I unpluged my throttle positon

no damage. clear codes. If they come back, let us know.

Posted on Dec 18, 2010

Mr BrokRench
  • 1623 Answers

SOURCE: p2107 p2110 p2104 car no idle

Hello, these codes are usually caused by wiring problems going to one of the coils but could be wiring to the throttle body. If the wiring is good and its a interfereance problem then its going to be harder to find the problem. You will need to use a oscilioscope and monitor each wire at the coil/throttle body and then compare the reading on that same wire at the pcm to determine which wire is having the interference then replace or reroute that wire. Check the wire connections to the PCM also. I hope this helps.

Posted on Sep 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Working on 2003 Lincoln LS 3.0. code p2110; p2107. Customer replaced throttle body


P2110 - Throttle Actuator Control System - Forced Limited RPM. Throttle actuator control system is in FMEM mode of forced limited RPM.
  • PCM damaged
  • Cross wired TACM motor
DTC indicates only that FMEM condition exists, and can be set incombination with DTCS P2100, P2101, or P2107, meaning the ETB faults should be repaired first.
P2107 - Throttle Actuator Control Motor Processor. The ETC control area of the PCM failed self test. Fault could be the result of an incorrect TP command, or the TACM wires shorted together.
  • TACM wire shorted together
  • TACM circuit wires shorted to pwr
  • PCM damaged
  • ETB damaged
An (TACM) circuit PID reading may indicate a fault if available
DV21 CHECK ETC MOTOR FOR SHORT OR OPEN
  • Remove ETC motor harness connector.
  • Measure the resistance between the TACM + and TACM - pins, through the motor.
Is the resistance less than .8 ohms, or greater than 1000 ohms?
Yes No Replace Throttle body assembly. note: Clear DTCS and rerun self test, if DTCS (P2100, P2106, P2112), or (P2100, P2106, P2111, P2112) are output GO to DV22 , for (P2100, P2106, P2107) GO to DV23 , and for (P2100, P2106, P2107, P2111, P2112) GO to DV24 , and for DTCS (P2101, P2106, P2110, P2111, P2112) GO to DV25 . GO to DV22 . DV22 CHECK ETC MOTOR HARNESS FOR OPEN
  • Remove PCM harness connector.
  • Measure the resistance of the TACM+ circuit between the PCM and TACM harness connectors.
  • Measure the resistance of the TACM- circuit between the PCM and TACM harness connectors.
Is the resistance less than 5 ohms?
Yes No GO to DV23 . Repair open circuit. DV23 CHECK ETC MOTOR HARNESS FOR SHORT TO GND, PWR, ETCREF, AND ETCRTN
  • Measure the resistance between the TACM + pin and battery gnd.
  • Measure the resistance between the TACM - pin and battery gnd.
  • Measure the resistance between the TACM + pin and battery pwr.
  • Measure the resistance between the TACM - pin and battery pwr.
  • Measure the resistance between the TACM + pin and ETCRTN.
  • Measure the resistance between the TACM - pin and ETCRTN.
  • Measure the resistance between the TACM + pin and ETCREF.
  • Measure the resistance between the TACM - pin and ETCREF.
Are both resistances greater than 10K ohms?
Yes No GO to DV24 , for P2101, GO to DV25 . Isolate and repair short circuit. DV24 CHECK ETC MOTOR HARNESS FOR CIRCUITS SHORTED TOGETHER
  • Measure the resistance between the TACM + pin and TACM- pin.
Is the resistance greater than 10K ohms?
Yes No GO to DV25 . Isolate and repair short circuit. DV25 CHECK FOR CROSSWIRED ETC MOTOR HARNESS
  • Measure the resistance between the TACM + pin and TACM- pin.
Is the resistance greater than 10K ohms?
Yes No GO to DV26 . Properly wire the TACM per TACM and PCM connector diagrams. DV26 SELF TEST VEHICLE
  • Key On Engine Off.
  • Clear DTCS.
  • Cycle accelerator pedal to the floor and back several times.
  • Self Test vehicle noting any DTCS.
Were there any DTCS related to the ETC system?
Yes No Intermittent fault, GO to Z1 Replace PCM.

Oct 13, 2017 | Lincoln Cars & Trucks

1 Answer

How do i fix?


P0122 throttle/pedal position sensor/switch A circuit low input
P0223 throttle/pedal position sensor/switch B circuit high input
P2101 throttle actuator ctrl motor circuit rang/perf
P2104 throttle actuator ctrl sys-forced idle
P2110 throttle actuator ctrl sys-forced limited rpm

Here is the meaning of the codes hope this helps

Sep 20, 2015 | Cars & Trucks

1 Answer

When driving 2006 LINCOLN LS the car will drop down to 20mph without warning, Why is this


Google search got this:
Ok so I looked up the codes and P2107 is for "Throttle Actuator Control Module Processor" and P2110 is for "Throttle Actuator Control System - Forced Limited RPM"
I think P2110 is thrown and active because there was an error with the throttle body module/part. There is a list of causes for P2107:
Possible causes
- Foulty Throttle Body
- Faulty Throttle Actuator Control Module
- Throttle Actuator Control Module harness is open or shorted
- Throttle Actuator Control Module circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
test the electrical connection on the part e to see if it's loose or corroded at all.
I'm also going to change my coil packs. Maybe if one of those are going out, the computer might throw this code too? Wouldn't think so, but maybe.
What was happening is, when I accelerated, sometimes the car would just die (well, I thought it was dying but was actually going into that forced Limited RPM mode). If I turn the car off and start it back up, all good again.
The throttle body is 422.94 OEM, so... yeah...
Read more: http://forums.automotive.com/70/9635379/general-auto-repair/04-lincoln-ls-error-codes-p2107-p2110/#ixzz3Ssbd2WnJ
Follow us: @MyAutomotive on Twitter ' AutomotiveCom on Facebook

Feb 26, 2015 | 2006 Lincoln LS

1 Answer

My 2005 expedition limited 3v 5.4 has codes p2104 p2107 and p2110 all of a sudden. Was running great until theses coses came up today with a check electronic throttle control. Idles high then run rough...


i think it will be the Throttle Actuator Control Module Processor its self , these things can go just in a blink of an eye , take to a Landrover specialist who will have the latest diagnostic equipment for your vehicle , may be a wiring problem and not the actual processor , keep me posted if you wish

Jun 11, 2014 | Cars & Trucks

1 Answer

2009 Ford Fusion codes 2107,2110 car slows to 30mph and will no longer accelerate


Well, those codes definately are related to why your vehicle will no longer accelerate!

P2107 is "Throttle Actuator Control (TAC) Module Processor"
This code means that the TAC portion of the Powertrain Control Module (PCM) has failed the self-test.

Posiible causes:
> TAC motor circuit harness shorted to ground
> TAC motor circuit harness shorted to voltage
> Damage Electronic Throttle Body (ETB)
> Damaged PCM

P2110 is "Throttle Actuator Control (TAC) Forced Limited RPM"

This code is informational only. It sets in conjunction with other throttle actuator control codes (like P2107 above). It is just letting you know that the PCM is limiting RPM due to a TAC malfunction, (So it doesn't do a "TOYOTA" on you and run away!"

Jul 06, 2011 | Ford Fusion Cars & Trucks

2 Answers

Code p2107and p2110


p2107 is--throttle actuator ctrl mod processor,----p2110 is-- throttle actuator ctrl system- forced limited rpm,-- call a dealership and they will tell you exactly what to do for the codes. or you can call auto zone, they may be able to help. have a good day !!

Jan 09, 2011 | 2007 Dodge Ram Truck

1 Answer

Etc fail safe mode codes p2104 2107 2110 2111 2112


P2104 Throttle Actuator Control System - Forced Idle
P2107 Throttle Actuator Control Module Processor
P2110 Throttle Actuator Control System - Forced Limited RPM
P2111 Throttle Actuator Control System - Stuck Open
P2112 Throttle Actuator Control System - Stuck Closed

Seems like Throttle Actuator is the problem.

Good luck on this repair.

Jul 13, 2010 | 2005 Lincoln LS

2 Answers

My 2005 lincoln LS has 2 obd11 codes they are: P2107 and P2110 what does this mean?


concern is not the throttle body or tp sensor
coils are causing rf interfernce which causes pcm to get an erratic signal and shut down throttle response
you may also notice a miss/hesitation attimes on hard accel and this is when throttle may shut down?
rec stress test all coils with an oscilliscope-common concern on this vehicle

May 04, 2010 | 2004 Lincoln LS

1 Answer

2004 Lincoln LS 3.0 engine stall codes p2107 p2110 have replace lots of parts.


hi your problemis your throttle actuator control position sensor its a small piece that goes in the front of the engine cost about 120usd

Nov 19, 2009 | 2004 Lincoln LS

Not finding what you are looking for?
2008 Ford Explorer Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...