Question about 1995 Toyota Corolla

1 Answer

How do I replace the corner lens cover - 1995 Toyota Corolla

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 937 Answers

To replace the cover plate on an electrical outlet, simply unscrew the screw from the plate, remove the plate, then replace with new cover and screw in. You can get new cover plates at Walmart or Home Depot. Most come with 1 screw, but some have 2.----------------------------------------------------------------------------------------
opcom 2010

Posted on Jan 04, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I cant get the cover of the internal light to change the bulb. Its stuck any ideas?

I don't know what you are working on, but if an interior light or a dome light, and the lens or cover doesn't have screws, then it probably is retained by plastic tabs that have to be pried or pinched a certain way to release the cover. Use a small flat blade screwdriver (like a surgeon's scalpel- carefully!) to pry up a corner or to poke for the tabs.

Nov 02, 2014 | Cars & Trucks

1 Answer

Tail light lens replace

Not clear on make or model. Generally the tail light assembly is accessible from the trunck. May have to unscrew or remove bracket to gain access. Most lens covers are held in place by series of clips. Carefully remove clips and the existing lens should come out. May need second person to position replacement lens cover from outside while you secure from inside trunck.

Jan 26, 2012 | 2008 Chrysler 300

1 Answer

How to change the back lights or break light

You need to pull away the trim from the corners to get at the bulbs,to remove the lenses you will see either 4 or 6 nuts that hold the lens cover onto the body,this is held in place with mastic so once the nuts are off just pull away from one corner of the lens.

Feb 26, 2011 | 1996 Volkswagen Jetta

1 Answer

How do i replace the dome light in my 97 corolla

The dome light is mounted on the ceiling of the car.
You would need a small flat-end screw-driver, and aim it to the base of the lens cover. Then pry the lens off.
If you cannot remove the bulb with your finger nail, then pry it out at its end. Or simply push back the bulb's contacting spring at the end of the bulb. Then steady your hand to catch it as it drops down.
Replace the lens by pushing it back to its housing.
Test the dome-light if it works. If it doesn't check the dome's door switches screwed to each door frame. Pushing on the door switches several times sometimes refreshes the dome-light. The door-switches can be removed with a medium-size 4-corner screw-driver.
By removing the black covers of the door-switches, their conditions could be detemined. Spray some electrical contact-cleaner on them if corroded, or simply replace with new ones.

Dec 14, 2009 | 1995 Toyota Corolla

1 Answer

My 1991 gmc sierra front side turning light bulb burnt out. I need to replace it. How do I replace it?

On the front turn signal cover there are 4 phillips head screws (1 on each corner) holding it onto the grill. Unscrew those 4 screws and pull the cover out some and you will see that there are 2 turn signal harness attached to the back of the lens. Push in the little plastic arm on the side of the harness and twist them to the right I think. This will unattach the harness from the back of the lens allowing you to pull it out. To get the bulb out of the harness, hold the harness and twist the bulb to the right or left and pull it out. On the bulb there is a little notch that will only allow you to turn it one way. Hope that helps.

Oct 06, 2009 | 1991 GMC Sierra

1 Answer

Hi, my passenger side window dropped down and i can't remove the panel to fix it. Can you tell me how to remove the inside door panel please.

Under the door handle there's an oval-shaped cover. Remove it and unscrew the two screws hidden under it/
Remove the red light lens on the corner and unscrew the screw hiding there.
Slowly but firmly, pull on the far side corner - where you removed the red lens. It should pop out. Following the line of the under side of the panel - pop out the panel as you go.
Lift up ane there you go - here's the window!!!

Good luck!

Jul 11, 2009 | 2002 Oldsmobile Alero

1 Answer

How to take skin off door to replace window regulator?

first look under the door handle - you'll see a kinda oval cover - remove it. under it are two screws - unscrew them.
remove red light lens on the edge of the door and unscrew the screw you see there.
pull firmly but carefully on the outer corner of the door - it should pop out. Follow the door lining from the under side upwards. popping it out as you go.
good luck.

Jul 06, 2009 | 2000 Oldsmobile Alero

1 Answer

How to adjust headlights on 2000 toyota celica

no u dont have to take lens cover off behind headlights there is two adjusting bolts one top one bottom in corner off wing

Nov 10, 2008 | 1995 Mitsubishi Galant

1 Answer

Replace passenger side power mirror clearance lamp (bulb only).

If you are facing the passenger side mirror adjust the top (large) mirror so that it is turning in towards the truck as far as it will go. Then look behind the mirror in the bottom righthand corner (outside bottom corner) and you will see a silver metal clip. Take a straight head screw driver and push on that clip and the lens will pop out. Then you simply unscrew the bulb holder from the lens and replace your bulb. Good luck!

Oct 16, 2008 | 2008 Ford F-350

Not finding what you are looking for?
1995 Toyota Corolla Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8274 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides