Question about 2002 Ford Explorer

2 Answers

Replaced washer fluid pump and verified power to the pump but it wont work?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

Problem could be empty no washer fluid in washer reservoir or reservoir hose to washer pump is broken or disconnected.check the washer nozzles is plugged stopped up.

Posted on Jan 04, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 54 Answers

First thing i would do is remove the rubber hose from the pump to the wipers. if fluid is coming out then you lines are plugged or kinked also in the past i have had to take a pin and poke the holes at the wiper end. also check inside of the washer fluid tank and see if the hose is clogged and not pulling fluid

Posted on Jan 04, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 mustang and wipers work fine but washer fluid wont work?


The fluid could be frozen in the hoses or the pump is broken. If you drive the car for awhile, the hoses will thaw out and the washers will work. Try getting fluid good to -20F. This fluid will be good for most areas in the US.
Replace the pump if you turn on the switch and hear no sound from the engine bay. Have someone standing close by for this test.

Jan 09, 2015 | 2008 Ford Mustang

1 Answer

Washer fluid not working


Verify that the washer pump is getting power when using the washer, If it is, disconnect the hose from the pump. Try the washer, If it starts pumping, you have a clog in the lines from the pump. If it doesn't pump, you need to replace the pump.

Jan 09, 2014 | 2003 Ford Taurus

1 Answer

Washer fluid wont spray


To check to see if pump is working,remove hose at windshield and turn on and see if fluid comes out,if it does then part that shoots it to windshield is clogged,a tooth pick may work to pry it loose and come out,if no fluid comes out,then pump is bad,you can check to see if pump is getting power with a meter.

May 18, 2013 | Cars & Trucks

2 Answers

Windshield wipers don't work


If the washer fluid doesn't pump, it is likely that the replacement pumps are defective or were installed incorrectly. Sounds like a snow job to me.

Oct 09, 2017 | 2004 Chevrolet Tahoe

1 Answer

TOO MUCH FLUID IN RESERVOIR


putting to much fluid in the reservoir wont make it stop working . Trying to you it with no washer fluid in it before you filled it burnt the pump up . You have to replace the washer pump in the reservoir now .

Aug 05, 2012 | 2005 GMC Envoy

1 Answer

Why dont the washer fluid come out when I turn the washers on. is there a fuse for the washer fluid to work.


check the fuses which are under the dash on the drivers side if they are good then check to see if you can hear the washer pump working .it could be bad wires at the washer plug from corrosion or even a broken pump connector.it can even be just a bad washer pump needing to be replaced.check for power and grounds at the pump connector,also it could be dirt plugging the hoses.if the pump is working and there is enough washer fluid then blow through the hoses there should be only a little resistance.check for a plugged washer system including the spray nozzles.if all this checks out then you could have a bad washer switch.if there is no power at the pump connection

Mar 28, 2011 | 2002 Dodge Neon

1 Answer

My wiper fluid wont come out


Check and verify that you indeed have the winshield washer tank filled if the tank is filled make sure the winshield washer hoses are attached to the washer nozzles under the hood if all of this checks out you probably have a bad windshield washer pump...

Dec 07, 2010 | 2004 Honda Civic

2 Answers

The fluid wont come out the windshield wipers can u help me understand because its full of liquid but nothing comes out


Windshield washer fluid pump motor has gone bad or the wire leads have corroded, causing no connection. The Windshield washer fluid motor pump is located at the washer fluid canister. Inspect the wire leads and check for 12Volts when turned on. If there is power and the pump does not work, replace the pump.

Thank you for using fixya and be safe.

Nov 04, 2010 | 2004 Suzuki Aerio

1 Answer

Rear windshield washer works but front does not....Any suggestions? Washer fluid is full, fuses are good, wipers work but no fluid or sound of pump running when lever is used to spray fluid on front...


Probably need to replace the pump. Separate pumps for front and rear. Check with a test light to see if there is power to the pump. If it has power but won't work, replace the pump. If no power, you have a wiring issue. Be sure to turn the switch on and have someone push the washer button when you are checking for power. There won't be any until you push it to "wash".

Feb 01, 2010 | 2007 Toyota 4Runner

Not finding what you are looking for?
2002 Ford Explorer Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...