Question about 2001 Jaguar Vanden Plas

Open Question

I have a jaguar 2001 vanden plas that ran out of gas i put a gallon in it and it still will not start what could be wrong

Engine stall is coming on

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
fossilruins
  • 114 Answers

SOURCE: 2001 jaguar vanden plas transmission problems

the P0730 code is incorrect gear ratio, suspects are the wrong type of tires on the car or check to see if the transmission has enough oil.

The P0715 codes means Input Turbine Speed Sensor Circuit Malfunction. this basically means that the pump is getting weak and causing the torque converter to slip


Posted on Jun 19, 2008

Ad
  • 100 Answers

SOURCE: 1988 Jaguar Vanden replace headlight

What you need to do is remove the 2 screws on the top bezel from inside the engine bay, then underneath the outer corner of the plastic headlamp surround there is a philips screw, (put your head under neath car near from wheel) loosen the screw, do not remove it, now the headlamp plastic bezel/surround will come free enough so you can get a philips screwdriver in through the middle of the headlamp surround, there is a chrome retaining ring holding the headlamp in place, loosen the 3 philips screws (do not remove) The retaining ring will rotate and you can slide the ring out from the outer edge of the headlamp surround. The headlamp will then come out throught the middle of the surround, disconnect the 3 pin multiplug and reverse process for install.

Posted on Sep 19, 2008

  • 2 Answers

SOURCE: 2001 XJ8 Vanden Plas engine light

I've had the same problem on my 2001. It turned out to be the battery. Apparently the voltage had dropped to the point that the computer began to malfunction. I'd first go to a battery shop and have it checked under load before looking for other solutions.

Posted on Dec 12, 2008

soultrip
  • 103 Answers

SOURCE: Need a wiring Diagram for 1998 Jaguar XJ8 Vanden

See here.

Posted on Sep 29, 2009

SOURCE: How do i disable valet mode om a 98 jaguar vanden

Try inserting the key into the drivers door lock and try centrally locking and unlocking all the doors a few times. If this does not reset the valet function try using the key in the drivers door lock and pressing the fob at the same time as locking and unlocking the doors. Even with valet mode engaged you should be able to access the trunk by physically inserting the key into the trunk lock.

Posted on Oct 06, 2010

Testimonial: "it was really helpful and the trunk yea i was able to open with the key but it still doesn't remove the valet all is doing is not keep sunroof open "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heavy gas smell on 2000 jaguar vanden plas


check for a bad fuel filter or a leaking rubber line after the fuel pump . To dump that much fuel so quickly ,the fuel pump is pumping to a broken /split hose or steel line.

Dec 12, 2013 | 2001 Jaguar Vanden Plas

1 Answer

Have a 2001 jaguar vanden plas. It won't start. It cranks fine battery is good but it won't turn over. I have been told could be fuel filter and or fuel pump. If you agree how do i change


To confirm that is is the fuel pump at issue here get a can of spray starting fluid and next time it won't fire up spray it into the air intake hose of the engine while someone cranks the engine over, if it lights right off then the pump may be the problem. A clogged fuel filter may cause loss of power but seldom if ever a no start.

Feb 15, 2012 | 2001 Jaguar Vanden Plas

1 Answer

How to do a timing change on 2001 Jaguar Vanden Plas


Timing is going to be non-adjustable as far as the ignition is concerned. Are you refering to the timing chain? If so, this "should" be good for the life of the engine. If there is a performance issue, I can help diagnose it. Let me know and I will continue to help.

Aug 25, 2010 | 2001 Jaguar Vanden Plas

1 Answer

Hard to start 1994 Vanden Plas


I have had a corroded rotor or badly worn contacts inside the distributor cap. Lightly sanding takes care of that and making sure the wires are all tight to plugs.

Mar 31, 2010 | 1994 Jaguar XJ6

2 Answers

1989 Jaguar Vanden Plas. Stalling on longer journeys


Fuel pump...change the fuel filter at the same time....

Sep 30, 2009 | 1989 Jaguar Vanden Plas

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...