Question about 2000 Chevrolet Venture

Open Question

Need to replace power steering line 2002 chevy venture

Puddle of power steering fluid on driveway

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chiquititas
  • 1010 Answers

SOURCE: 1982 G30 Chevy Van power steering fluid

Find the power steering pump. The fluid goes in the top of the pump. Look for a twist off cap that has a measuring stick attached to the under side, when you take it off. Make sure you use the correct type of fuild for YOUR kind of vehicle. There are diffrent types for different makes of vehicles. Don't OVERFILL the pump.

Posted on May 15, 2008

leetamara
  • 702 Answers

SOURCE: power steering - 1999 chevy silverado

You're going to have to bleed the system alot on those trucks. Just remove the return line and have an assistant turn the steering wheel back and forth just enough to engage the pump and filling the resevour while doing this. Keep bleeding until you have a good flow of P/S fluid out with no air bubbles. This can take a while.

Posted on Aug 24, 2008

  • 468 Answers

SOURCE: Need to replace front brake pads on a 2002 chevy

Support the vehicle on jack stands or equivelant...block, rock, etc, remove the tires that you'll be working on. There will be two allen bolts on the back side of the caliper; remove those without twisting off the rubber boot that's attached to them. once you have those out, grab the caliper and pull it toward you to compress the cylinder. You may have to take some fluid out of the brake fluid reservoir so it doesn't overflow when you do this. Once you have the caliper piston compressed, lift it up, remove the pads, and replace them with the new ones. Your rotors usually don't really need replacing unless they have deep grooves worn in them, or the brake pedal vibrates when you are braking. Once you have the new pads in, put everything back like it was before you started taking it apart, and you're done with that wheel.

Posted on Nov 28, 2009

  • 10 Answers

SOURCE: power steering fluid in '04 chevy impala

i have an impala Ls 3.8 liter and (not sure about the 3.4 liter) but mine is located in the back of the engine near the middle. and get a long thin funnel because its down a little ways.

Posted on Mar 07, 2010

grendelynn
  • 5 Answers

SOURCE: fault code p0440 CHevy venture

I had that exact code a couple weeks ago. Mine needed new oxygen sensors. They(there are 2, only one was throwing a code, but I had both replaced) cost a little over $100 to have replaced.

Posted on Apr 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power steering tank full but still turning hard. 2001 chevy venture. Any ideas


With engine running, steering turned hard right or left, can you see the fluid churn in the power steering reservoir? If not, maybe one of the power steering lines is blocked?

I just wanted to add, with some makes and models. With everything off, I remove the power steering belt. I take the return line loose from pump, aim into container, rotate the pulley by hand, see if any fluid comes out of return line? The return line should be low pressure, usually held to pump by hose clamp. The high pressure line has threaded fittings.

Oct 16, 2016 | 2001 Chevrolet Venture

1 Answer

Type of power steering fluid for chevy venture


You can use the same fluid as you use in the automatic transmission in your van.

Dec 12, 2012 | 2002 Chevrolet Venture Passanger

1 Answer

Where is the power steering pump on 2002 chevy venture


You can see the power steering pump on the front
of the motor

It along with the alternator ,crank damper & sometimes
water pump,are driven by the same belt ,been that way for
a century

Oct 12, 2012 | 2000 Chevrolet Venture

1 Answer

I own a 2001 chevy venture, the other day I tried to go to work and the power steering was gone, their is no power steering fluid loss, not one spot to be seen of anything leaking that ive noticed. she...


Does the belt turn the power steering pulley, I guess if it didn't it would make a racket.
With engine idling, cap off power steering reservoir, wheels turned one way or the other, can you see fluid swirl? If not maybe faulty power steering fluid lines or blocked.
I can't rule out the pump at the moment or the rack.
On some makes and models, I can take the belt off the power steering, engine off, of course, take return line loose, aim into catch pan, rotate pulley with my finger and fluid will circulate. The return line is a low pressure line usually held on with hose clamp at the pump. The high pressure line is a threaded fitting.
All that talking and I didn't tell you much? lol

May 04, 2017 | 2001 Chevrolet Venture

1 Answer

Where to put power steering fluid for 2002 chevy venture. Is the dipstick red? I can't find the reservoir to fill????


Hope this picture will help you. Look at the yellow arrow on the left,Take the Cap off and see if the fluid is in a correct level



tgv1501_21.jpg

Dec 20, 2010 | 2000 Chevrolet Venture

1 Answer

Power steering in 2002 Dodge Sport Van makes a whining noise and is difficult to steer at times. Power steering fluid is full.


R U LOOSING ANY STEERING FLUID? ANY FLUID ON THE GROUND NEAR THE STEERING RACK? IF NOT, TAKE COVER OFF THE STEERING PUMP& WITH VEH. RUNNING, TURN STEERING WHEEL ALL THE WAY TO THE LEFT &TO THE RT., DO IT 6 TO 10 X,S U MAY HAVE AIR IN UR STEERING LINES.. IT,S WORKED FOR ME, HOPEFULLY FOR U GD LK, CHARLIE

Mar 06, 2010 | 1999 Chevrolet Venture

1 Answer

2004 Chevy Impala Power Steering gone


If it is a line no it usually isn't big or expensive. If it is your pump that is expensive for the part but usually not to bad to do. But first see if it is that or if you live where it is really cold it could have just overflowed.

Feb 07, 2010 | 2004 Chevrolet Impala

1 Answer

Power steering and brake line location2002 Chevy Silverado 2500HD


the power steering lines are very short hoses approximately 8 inches long that go from the power steering pump down to the steering box, which is located on the frame, just below the pump. The brake lines run from the master cylinder(where you fill it with fluid on the drivers side firewall) down to the frame, and then follow the frame both directions; both to the front end and the rear end, along the drivers side frame rail, just on the inside of it. The fuel line runs along the same path to the rear.

Mar 03, 2009 | 2002 Chevrolet Silverado 2500HD

Not finding what you are looking for?
2000 Chevrolet Venture Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...